درباره ما
ISA - International Society of Automation: Recent submissions
Now showing items 61-80 of 258
-
ISA TR100.15.01
Abstract: General
This document presents an architecture model for interconnecting automation system elements over untrusted backhaul networks. The focus is on wireless physical la yer but is not limited to ... -
ISA TR96.05.01
Abstract: ANSI/ISA-TR96.05.01 is informative and does not contain any mandatory requirements.
ANSI/ISA-TR96.05.01 is limited to automated valves normally operating in either a full open or full closed position.
The boundary ... -
ISA 88.00.03
Abstract: This Part 3 standard on Batch Control defines a model for general and site recipes; the activities that describe the use of general and site recipes within a company and across companies; a representation of general and ... -
ISA 60079-5
Abstract: This standard contains specific requirements for the construction, testing and marking of electrical equipment, parts of electrical equipment and Ex components in the type of protection powder filling "q", intended ... -
ISA 61241-1
Abstract: This standard is applicable to electrical apparatus protected by enclosures and surface temperature limitation for use in explosive dust atmospheres classified as zone 21 or zone 22 hazardous locations in accordance ... -
ISA TR62443-2-3
Abstract: ISA-TR62443-2-3 describes requirements for asset owners and industrial automation and control system (IACS) product suppliers that have established and are now maintaining an IACS patch management program.
This Technical ... -
ISA RP60.3
Abstract: The intent of this recommended practice is to present design concepts which are compatible with the physical and mental capabilities of the control center operator while recognizing any of the operator's limitations.
The ... -
ISA TR77.70.01
Abstract: This technical report provides guidance in the design and function of a method for instrument tracking and documentation control that is adaptable for use by multiple plants and is compatible with many of the available ...Subject(s) : Application , Data , Distributed Control System , Document Management System , Instrument , Report , Technical Report , Tracking , Work and Asset Management System , -
ISA 84.91.01
Abstract: This standard addresses the instruments that are classified as process safety safeguards by the authority having jurisdiction (typically the owner/operator or local regulatory authority), and establishes requirements for ... -
ISA 60079-15
Abstract: This standard specifies requirements for the construction, testing and marking for Group II electrical equipment with type of protection, "n" intended for use in explosive gas atmospheres. This standard applies to ... -
ISA 96.02.01
Abstract: This standard provides general requirements for the development of specifications for electric actuators.
Purpose
The purpose of this standard is to provide a guide to assist the user in specifying electric valve ... -
ISA TR12.12.04
Abstract: Introduction
When electrical equipment is used in locations in which fire or explosion hazards may exist due to flammable gases or vapours, flammable liquids, combustible dust, or ignitable fibers or ... -
ISA TR77.60.04
Abstract: This technical report addresses the following issues relating to Electronic Screen Displays for operators of fossil-fired power plants with boilers of 200,000 lb/hr or greater: display structure, display elements, display ... -
ISA 5.1
Abstract: General
This standard is intended to meet the different procedures of various users who need to identify and graphically depict measurement and control equipment and systems. These differences are recognized when they ... -
ISA 60079-10-1
Abstract: This standard is concerned with the classification of areas where flammable gas or vapor or mist hazards (see Notes 1, 2 and 3) may arise and may then be used as a basis to support the proper selection and ... -
ISA TR84.00.02 PART 3
Abstract: ISA-TR84.00.02-2002 - Part 3 is intended to be used only after achieving a thorough understanding of ISA-TR84.00.02-2002 - Part 1, which defines the overall scope. This technical report addresses:
a) technical guidance ... -
ISA TR91.00.02
Abstract: Introduction
Process operating facilities utilize instrumentation to monitor and control processes. The performance of this instrumentation ties directly into product quality and product throughput. In addition, the ... -
ISA TR84.00.09
Abstract: The scope of this document is to address and provide guidance on the countermeasures used to reduce the likelihood of a security breach of the SIS that degrades its ability to perform its function(s). This relates to ... -
ISA TR84.00.02 PART 1
Abstract: ISA-TR84.00.02-2002 - Part 1 is informative and does not contain any mandatory clauses. ISA-TR84.00.02-2002 is intended to be used only with a thorough understanding of ANSI/ISA-84.01-1996 (see Figure I.1). Prior to ... -
ISA TR84.00.04 PART 2
Abstract: Introduction
Used in conjunction with ISA-TR84.00.04-2005 Part 1, the example set forth in this technical report is provided to illustrate how to apply ANSI/ISA-84.00.01-2004 Parts 1-3 (IEC 61511Mod). ...