درباره ما
ISA - International Society of Automation: Recent submissions
Now showing items 81-100 of 258
-
ISA 75.11.01
Abstract: The scope of this standard is to define the statement of typical control valve inherent flow characteristics and inherent rangeabilities, and to establish criteria for adherence to manufacturer-specified flow characteristics. -
ISA TR12.13.03
Abstract: Combustible gas detection used for process safety management may also be used to provide protection from explosion or fires by minimizing the possibility of an accumulation of combustible gases reaching ignitable levels. ...Subject(s) : Apparatus , combustible gas , combustible gas detection , combustible vapor , fixed apparatus , gas concentration , gas free work permit , hot work permit , portable apparatus , transportable apparatus , -
ISA 75.08.01
Abstract: This standard applies to integral flanged globe-style control valves, sizes 15 mm (1/2 inch) through 400 mm (16 inches), having top, top and bottom, port, or cage guiding.
Purpose
The purpose of ... -
ISA 77.41.01
Abstract: The scope of this standard is to address the major combustion control subsystems in boilers with steaming capabilities of 200,000 lb/hr (25 kg/s) or greater. These subsystems include, but are not limited to, furnace pressure ... -
ISA 50.00.01
Abstract: Scope and purpose
This document applies to analog dc signals used in process control and monitoring systems to transmit information between subsystems or separated elements of systems.
Its purpose is to provide for ... -
ISA RP92.06.02
Abstract: This Recommended Practice applies to all chlorine gas-detection instruments that satisfy the performance requirements in ISA-S92.06.01.
Reference Clause 3 of ISA-S92.06.01 for definitions of terms as used herein. ... -
ISA 37.5
Abstract: This Standard covers uni-directional and bi-directional strain-gage linear acceleration transducers.
Included among the specific types of strain-gage linear acceleration transducers for which this Standard is applicable, ... -
ISA 62443-1-1
Abstract: This standard defines the terminology, concepts and models for industrial automation and control systems (IACS) security. It establishes the basis for the remaining standards in the ISA99 series.
To fully articulate ... -
ISA 95.00.01
Abstract: This standard describes the interface content between manufacturing operations and control functions and other enterprise functions. The interfaces considered are the interfaces between Levels 3 and 4 of the hierarchical ... -
ISA 76.00.02
Abstract: This standard applies to all types of surface-mount fluid distribution components with elastomeric sealing devices used within process analyzer and sample-handling systems. This includes components such as valves, filters, ... -
ISA 75.10.02
Abstract: This document applies to valves, sizes NPS ½ (DN 15) through NPS 26 (DN 650), of the clamp or pinch valve design incorporating clamp or pinch elements.
Purpose
The purpose of this document is ... -
ISA 92.00.04
Abstract: This standard provides minimum requirements for fixed and transportable open path toxic gas detection equipment.
This standard specifies the construction, performance and testing of open path (line -ofsight) gas detectors ... -
ISA 77.43.01
Abstract: The scope of this standard is to address the unit/plant demand development subsystem for boilers with steaming capacities of 200,000 lbs/hr (25 kg/s) or greater. This subsystem includes generation demand, boiler demand ... -
ISA RP92.02.02 PART II
Abstract: This recommended practice applies to all carbon monoxide gas detection instruments that satisfy the performance requirements in ISA-S92.02.01, Part I.
Reference Clause 3 of ISA-S92.02.01, Part I, for definitions of ... -
ISA 96.03.01
Abstract: This standard provides general requirements for the development of specifications for pneumatic scotch yoke actuators.
This document applies to actuators with a maximum allowable operating pressure (MAOP) up to 250 ... -
ISA 98.00.01
Abstract: This standard identifies the recommended criteria for certification of control system technicians. These criteria address qualifications based on education, experience, training, and job performance.
Purpose
The ... -
ISA 75.10.03
Abstract: This document applies to directly pneumatically operated pinch valves, sizes 1/2 inch through 24 inches, of the shell and tube design which have flanges that mate with ASME B16.1 Class 125 (PN20) and/or ASME B16.5 Class ... -
ISA 67.14.01
Abstract: This standard identifies the criteria for certification of instrumentation and control technicians at nuclear facilities. These criteria address qualifications based on education, experience, training, and job performance. ... -
ISA TR88.00.02
Abstract: Since its inception, the OMAC Packaging Machine Language (PackML) group has been using a variety of information sources and technical documents to define a common approach, or machine language, for automated machines. The ...Subject(s) : administration tags , and TR88 , base state model , command tags , discrete machine software , functional programming , ISA88 , machine control software , machine state , mode manager , modular programming , PackML , PackTags , PDA , Production Data Acquisition , state commands , state engine , State machine , state model , status tags , unit control mode , Weihenstephan , -
ISA 37.8
Abstract: This standard covers strain-gage force transducers, primarily those used in measurement systems.
Included among the specific versions of strain-gage force transducers, to which this Standard is applicable, are the ...