درباره ما
ISA - International Society of Automation: Recent submissions
Now showing items 101-120 of 258
-
ISA 75.13.01
Abstract: This standard specifies tests designed to determine the performance of positioners with analog input signals and pneumatic output. The method of evaluation described in this standard specifies the use of an actuator of the ... -
ISA 18.1
Abstract: This Standard is primarily for use with electrical annunciators that call attention to abnormal process conditions by the use of individual illuminated visual displays and audible devices. Annunciators can range from a ... -
ISA TR92.06.03
Abstract: This report has been written to answer questions about the feasibility of performing the tests described in the ISA standard for chlorine gas detection instruments (ISA-92.06.01-1998). The report discusses two questions; ... -
ISA 60079-6
Abstract: This standard specifies the requirements for the construction and testing of oil-immersed electrical equipment, oil-immersed parts of electrical equipment and Ex components in the type of protection oil immersion ... -
ISA 12.12.01
Abstract: Applicable to Class I and II, Division 2 and Class III, Divisions 1 and 2 locations
This standard applies only to equipment, circuits, and components for use in Class I and II, Division 2 and Class ... -
ISA 75.26.01
Abstract: This document applies to all pneumatically operated, automated rotary or reciprocating, on/off, or modulating valves. It also includes automation components (i.e. positioners, transducers, and solenoids) as applicable. It ... -
ISA 96.03.02
Abstract: This standard provides general requirements for the development of specifications for pneumatic rack and pinion actuators.
This document applies to actuators with a maximum allowable operating pressure (MAOP) up to 145 ... -
ISA 75.08.08
Abstract: This standard applies to raised-face flanged globe-style angle control valves, 1 inch through 8 inches.
Purpose
The purpose of this standard is to aid users in their piping design by providing Classes 150, 300, and ... -
ISA 62443-2-1
Abstract: This standard defines the elements necessary to establish a cyber security management system (CSMS) for industrial automation and control systems (IACS) and provides guidance on how to develop those elements. This document ... -
ISA TR88.0.03
Abstract: ISA-TR88.0.03 defines a format or graphical representation for recipes used in the automation of batch processing plants as defined in part one of the IEC SC65A / ISA SP88 standard. (See Annex A — References.) The ...Subject(s) : list format , modified Gantt chart format , operation procedure , procedure , recipe , recipe presentation format , sequential function chart format , unit procedure , -
ISA 71.03
Abstract: This standard encompasses mechanical influences, specifically shock and vibration, for industrial process measurement and control systems. Specifications for other environmental conditions, including seismic and transportation, ... -
ISA 60079-18
Abstract: This standard gives the specific requirements for the construction, testing and marking of electrical equipment, parts of electrical equipment and Ex components with the type of protection encapsulation "m" intended ... -
ISA 12.02.02
Abstract: This document provides guidance in the preparation of control drawings for intrinsically safe apparatus, associated apparatus, and intrinsically safe systems.
This document is intended to be used in conjunction with ... -
ISA RP92.0.02 PART II
Abstract: This recommended practice applies to all toxic gas detection instruments that satisfy the performance requirements in ISA-S92.0.01, Part I.
Refer to Clause 3 of ANSI/ISA-S92.0.01, Part I, for definitions of terms as ... -
ISA 77.44.01
Abstract: The scope of this standard addresses the major steam temperature control subsystems in boilers with steaming capacities of 200,000 lb/hr (25 kg/s) or greater. These subsystems include, but are not limited to, superheat ... -
ISA 12.04.04
Abstract: This standard applies to equipment made suitable for use in hazardous (classified) locations by pressurizing the use of a pressurizing system.
This standard applies both to equipment with and without an internal ... -
ISA TR100.00.03
Abstract: This technical report presents descriptive user and market-related requirements of wireless communication in factory automation applications. It provides
• references to all six ISA100 usage classes;
• ... -
ISA 37.3
Abstract: This Standard covers strain gage pressure transducers, but primarily those used in measurement systems.
Included among the specific versions of strain gage pressure transducers to which this Standard is applicable are ... -
ISA TR84.00.02 PART 5
Abstract: ISA-TR84.00.02-2002 - Part 5 is informative and does not contain any mandatory requirements. ISA-TR84.00.02-2002 - Part 5 is intended to be used only with a thorough understanding of ISA-TR84.00.02-2002 - Part 1 which ... -
ISA RP42.00.01
Abstract: This Recommended Practice defines nomenclature for tube fittings most commonly used in instrumentation. It is not intended as a substitute for manufacturers' catalog numbers, nor does it apply to special fittings. This ...