درباره ما
ISA 60079-18
Explosive atmospheres - Part 18: Equipment protection by encapsulation "m" - 12.23.01
Organization:
ISA - International Society of Automation
Year: 2012
Abstract: This standard gives the specific requirements for the construction, testing and marking of electrical equipment, parts of electrical equipment and Ex components with the type of protection encapsulation "m" intended for use in explosive gas atmospheres or explosive dust atmospheres.
This standard applies only for encapsulated electrical equipment, encapsulated parts of electrical equipment and encapsulated Ex components (hereinafter always referred to as "m" equipment) where the rated voltage does not exceed 11 kV.
The application of electrical equipment in atmospheres, which may contain explosive gas as well as combustible dust simultaneously may require additional protective measures.
This standard does not apply to dusts of explosives, which do not require atmospheric oxygen for combustion, or to pyrophoric substances
This standard does not take account of any risk due to an emission of flammable or toxic gas from the dust.
This standard supplements and modifies the general requirements of ANSI/ISA- 60079-0. Where a requirement of this standard conflicts with a requirement of ANSI/ISA-60079-0, the requirement of this standard shall take precedence.
This standard applies only for encapsulated electrical equipment, encapsulated parts of electrical equipment and encapsulated Ex components (hereinafter always referred to as "m" equipment) where the rated voltage does not exceed 11 kV.
The application of electrical equipment in atmospheres, which may contain explosive gas as well as combustible dust simultaneously may require additional protective measures.
This standard does not apply to dusts of explosives, which do not require atmospheric oxygen for combustion, or to pyrophoric substances
This standard does not take account of any risk due to an emission of flammable or toxic gas from the dust.
This standard supplements and modifies the general requirements of ANSI/ISA- 60079-0. Where a requirement of this standard conflicts with a requirement of ANSI/ISA-60079-0, the requirement of this standard shall take precedence.
Collections
:
Show full item record
| contributor author | ISA - International Society of Automation | |
| date accessioned | 2017-09-04T17:26:29Z | |
| date available | 2017-09-04T17:26:29Z | |
| date copyright | 01/01/2012 | |
| date issued | 2012 | |
| identifier other | CKKLAFAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;jsessionid=A33FFBB4A04818B251172099FA6814F7/handle/yse/149608 | |
| description abstract | This standard gives the specific requirements for the construction, testing and marking of electrical equipment, parts of electrical equipment and Ex components with the type of protection encapsulation "m" intended for use in explosive gas atmospheres or explosive dust atmospheres. This standard applies only for encapsulated electrical equipment, encapsulated parts of electrical equipment and encapsulated Ex components (hereinafter always referred to as "m" equipment) where the rated voltage does not exceed 11 kV. The application of electrical equipment in atmospheres, which may contain explosive gas as well as combustible dust simultaneously may require additional protective measures. This standard does not apply to dusts of explosives, which do not require atmospheric oxygen for combustion, or to pyrophoric substances This standard does not take account of any risk due to an emission of flammable or toxic gas from the dust. This standard supplements and modifies the general requirements of ANSI/ISA- 60079-0. Where a requirement of this standard conflicts with a requirement of ANSI/ISA-60079-0, the requirement of this standard shall take precedence. | |
| language | English | |
| title | ISA 60079-18 | num |
| title | Explosive atmospheres - Part 18: Equipment protection by encapsulation "m" - 12.23.01 | en |
| type | standard | |
| page | 50 | |
| status | Active | |
| tree | ISA - International Society of Automation:;2012 | |
| contenttype | fulltext |