درباره ما
IEC - International Electrotechnical Commission: Recent submissions
Now showing items 1301-1320 of 9213
-
IEC 62341-6-3
Abstract: This part of IEC 62341 specifies the standard measurement conditions and measuring methods for determining the image quality of organic light emitting diode (OLED) display panels and modules. -
IEC TR 62905
Abstract: This document describes general exposure assessment methods for wireless power transfer (WPT) at frequency up to 10 MHz considering thermal and stimulus effects. Exposure assessment procedures and experimental results are ... -
IEC 60335-2-58
Abstract: This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electrically operated dishwashing machines for washing plates, dishes, glassware, cutlery and similar articles, with ... -
IEC 60749-26
Abstract: This part of IEC 60749 establishes the procedure for testing, evaluating, and classifying components and microcircuits according to their susceptibility (sensitivity) to damage or degradation by exposure to a defined human ... -
-
IEC 61558-1 (REDLINE + STANDARD)
Abstract: This part of IEC 61558 deals with safety aspects of transformers, reactors, power supply units and combinations thereof such as electrical, thermal and mechanical safety This document covers the following independent or ... -
IEC 61788-24
Abstract: This part of IEC 61788 describes a test method for determining the retained critical current after double bending at room temperature of short and straight Ag- and/or Ag alloy-sheathed Bi-2223 superconducting wires that ... -
IEC 60286-5 (REDLINE + STANDARD)
Abstract: This part of IEC 60286 describes the common dimensions, tolerances and characteristics of the tray. It includes only those dimensions that are essential for the handling of the trays for the stated purpose and for placing ... -
IEC TS 60076-23
Abstract: This document specifies requirements for devices for the suppression of DC magnetic bias of power transformers and convertor transformers. It includes requirements for service conditions, structures, testing, packing, ... -
IEC 62969-1
Abstract: This part of IEC 62969 provides general requirements for performance evaluations and environmental conditions for the power interface of automotive vehicle sensors. For performance evaluations, various electrical performances ... -
IEC 60230
Abstract: This document defines the procedure for carrying out withstand lightning and switching impulse tests and withstand superimposed impulse test on cables and their accessories. This document applies solely to the methods of ... -
IEC 63147
Abstract: This standard contains the functional and design criteria for accident monitoring instrumentation for new plant designs and nuclear power generating stations desiring to perform design modifications. -
IEC 60744
Abstract: This document provides requirements and recommendations for the design, construction and test of safety logic assemblies used in safety systems to perform category A safety functions (in accordance with IEC 61226). Safety ... -
IEC 60077-2 (REDLINE + STANDARD)
Abstract: In addition to the rules given in IEC 60077-1, this part of IEC 60077 provides general rules for all electrotechnical components installed in power circuits, auxiliary circuits, control and indicating circuits, etc., on ... -
IEC 61071 (REDLINE + STANDARD)
Abstract: This International Standard applies to capacitors for power electronics applications. The operating frequency of the systems in which these capacitors are used is usually up to 15 kHz, while the pulse frequencies may be ... -
IEC 61788-23
Abstract: This part of IEC 61788 addresses a test method for the determination of the residual resistance ratio (RRR), rRRR , of cavity-grade niobium. This method is intended for high-purity niobium grades with 15 < TRRR < ... -
IEC 60730-2-9
Abstract: Replacement: This part of IEC 60730 applies to automatic electrical temperature sensing controls for use in, on or in association with equipment, including electrical controls for heating, air-conditioning and similar ... -
-
IEC 62448
Abstract: This International Standard specifies a generic format for multimedia e-publishing employed for e-book data interchange among data preparers and publishers, satisfying a number of publishers requirements: revisable, ... -
IEC 62948
Abstract: This International Standard specifies the system architecture and communication protocol of WIA-FA (Wireless Networks for Industrial Automation − Factory Automation) based on IEEE STD 802.11-2012 physical layer (PHY). ...