درباره ما
NACE - NACE International: Recent submissions
Now showing items 241-260 of 344
-
NACE 3T199
Abstract: Foreword
Assessment of corrosion in the field is complex because of the wide variety of applications, process conditions, and fluid phases that exist in industrial plants where corrosion occurs. A wide ... -
NACE TM0173
Abstract: General
This standard describes two test methods for evaluating water quality for subsurface injection: Procedure A-rate versus cumulative volume test (for water-quality monitoring) and Procedure ... -
NACE SP0288
Abstract: General
This standard practice provides inspection requirements to verify compliance to a specification for application of a lining in steel or concrete equipment such as tanks, vessels, sumps, and ... -
NACE TM0194
Abstract: This standard describes field test methods for estimating bacterial populations commonly found in oil and gas systems. Although these techniques have been successful in the oil field, they are not the only methods that are ... -
NACE 80200
Abstract: The purpose of this NACE/SSPC technical committee report is to describe current practices for the preparation of a protective coating specification for atmospheric service. It provides a general description of a specification, ... -
NACE TM0197
Abstract: General
This standard describes a test method to screen scale inhibitors for their ability to prevent precipitation of BaSO4 or SrSO4, or both, from oilfield brines. The test ... -
NACE MR0175/ISO 15156 CIR 4 TO PT 3
Abstract: Foreword
The establishment of the ISO 15156 Maintenance Agency was confirmed by the ISO Technical Management Board in June 2007. A copy of the TMB Vote-Form Number: 34/2007 giving the rules of procedure ... -
NACE 34103
Abstract: Introduction
The type of sulfidation described in this report is the corrosion of metal resulting from reaction with sulfur compounds in hightemperature environments such that a surface sulfide scale ... -
NACE 1D191
Abstract: General
Scale deposition has been occurring in oil and gas production and injection wells and surface equipment for many years. The scale deposits can be located both downhole and in surface equipment. ... -
NACE 2103
Abstract: Introduction
Generally, high-temperature coatings are used on sutfaces to provide corrosion protection and/or for aesthetic reasons. A good understanding of the sutfaces to be coated and the service ... -
NACE NO. 11
Abstract: This standard recommended practice specifies procedures to design, install, and inspect thin-film organic linings applied to new carbon steel process vessels to prevent corrosion and other forms of degradation, such as ... -
NACE 05107
Abstract: General
Structure-to-soil potential measurements to determine the effectiveness of CP is sometimes prone to error due to unstable reference cell contact or high soil IR drops. In certain soil environments, ... -
NACE SP0590
Abstract: The objective of this section is to identify important factors influencing boiler feedwater (BFW) deaerator cracking based on literature references and case history analyses. -
NACE NO. 12
Abstract: This standard is a procedure for the application of metallic thermal spray coating (TSC) of aluminum, zinc, and their alloys and composites for the corrosion protection of steel. Required equipment, application procedures, ... -
NACE SP0491
Abstract: General
For proper analysis of the seal systems required, this standard contains a worksheet that shall be completed prior to equipment selection.
The worksheet shall be completed with as ... -
NACE SP0502
Abstract: Introduction
This standard covers the NACE external corrosion direct assessment (ECDA) process for buried onshore ferrous piping systems. This standard is intended to serve as a guide for applying the NACE ECDA process ... -
NACE RP0395
Abstract: This standard defines the requirements for fusionbonded epoxy powder coatings applied by electrostatic spray or other suitable method to deformed and plain steel reinforcing bars that are intended to be capable of ...Subject(s) : Coating requirements , concrete reinforcement , corrosion resistance , epoxy coating , fabrication repair , field repair , steel bars , -
NACE EFC PUBLICATION
Abstract: INTRODUCTION
In cooling water systems, corrosion and fouling problems are not new, but continuing trends in environmental legislation are leading to ever-greater degrees of evaporation and consequently ... -
NACE SP0170
Abstract: This standard practice provides mitigation methods to protect austenitic stainless steels and other austenitic alloys from PTA SCC that can occur during a shutdown of refinery equipment.
For the purposes of this ...