درباره ما
NACE - NACE International: Recent submissions
Now showing items 261-280 of 344
-
NACE 41013
Abstract: Introduction Recent operating experience from nuclear power plants, particularly those located in the United States, many of which are between 30 and 40 years old, indicates that degradation of buried piping is occurring ... -
NACE 7L198
Abstract: Introduction
Historically, cathodic protection system design for offshore structures using galvanic anodes was based on a single nominal maintenance current density intended to protect a structure over ... -
NACE SP0499
Abstract: General
This standard covers aspects of corrosion control and monitoring in seawater injection systems.
Most seawater injection systems rely on coatings, liners, plastics, composite materials, and ... -
NACE SP0185
Abstract: General
This standard presents guidelines for establishing minimum requirements to ensure proper application and performance of plant-applied polyolefin resin coating systems extruded over soft adhesives ... -
NACE SP0100
Abstract: The purpose of this standard recommended practice is to furnish guidelines that provide corrosion control personnel with information on corrosion control of prestressed concrete cylinder pipe (PCCP) through the application ... -
NACE NO. 1
Abstract: This joint standard covers the requirements for white metal blast cleaning of uncoated or coated steel surfaces by the use of abrasives. These requirements include the end condition of the surface and materials and procedures ... -
NACE SP0387
Abstract: General
This standard defines minimum physical quality and inspection standards for cast galvanic anodes for offshore applications.
This standard is applicable to typical offshore platform anode ... -
NACE 31205
Abstract: Foreword
The purpose of this technical committee report is to discuss the state-of-the-art considerations and methods for selecting, applying, and evaluating the use of biocides in oil and gas field ... -
NACE TM0284
Abstract: General
This standard establishes a test method for evaluating the resistance of pipeline and pressure vessel steels to HIC caused by hydrogen absorption from aqueous sulfide corrosion.
Details are ... -
NACE 35101
Abstract: General
Liner Description
The thermoplastic liner system described in this report combines layers of materials that allow the total structure to behave homogeneously, but with a ... -
NACE SP0302
Abstract: General
This standard describes procedures for the selection, surface preparation, application, and inspection of a coating system used to protect the interior surfaces of new and used rail tank cars ... -
NACE SP0507
Abstract: This standard addresses ECDA indirect inspection data, including close-interval surveys (CIS), aboveground coating evaluation surveys (e.g., direct-current voltage gradient [DCVG] and Pearson survey), and corrosiveness of ... -
NACE 05114
Abstract: Introduction
HVDC transmission is used to carry electrical energy over long distances or to interface two alternating current (AC) power systems that might not be synchronized. HVDC transmission can ... -
NACE SP0607
Abstract: General
This standard presents acknowledged practices for the mitigation of AC and lightning effects on metallic structures and corrosion control systems.
This standard covers some of the basic ... -
NACE SP0507
Abstract: Foreword
The purpose of this NACE International standard practice is to present procedures and practices for the design, installation, operation, and maintenance of deep anode beds used for the control ... -
NACE TM0169
Abstract: This guide covers and describes the factors that influence laboratory immersion corrosion tests, particularly mass loss tests. These factors include apparatus, sampling, test specimen, test conditions (test solution ... -
NACE 01101
Abstract: Introduction
Reinforced concrete is a versatile and widely used construction material. Its excellent performance and durability rely on the compatibility of the steel with the concrete surrounding it ... -
NACE WJ-1
Abstract: General
This standard defines the Clean to Bare Substrate (WJ-1) degree of surface cleanliness of uncoated or coated metallic substrates by use of waterjet cleaning. The defined degree of cleanliness ... -
NACE SP0386
Abstract: General
This standard describes a procedure for the application of a coating system to the interior surfaces of covered steel hopper rail cars used primarily in the plastic, food, and chemical industries. ...