درباره ما
NAVY - AS - Naval Air Systems Command: Recent submissions
Now showing items 441-460 of 2147
-
MIL-C-17183B
Abstract: This specification covers tubular braided nylon cord designed specifically for telescopic splicing. (See 6.3 for textile definitions.) Intended Use: Cord of this specification is intended for use in ... -
MIL-HDBK-255A CHG NOTICE 1
Abstract: The intent of this handbook is to provide nuclear safety design and evaluation criteria which apply to all nuclear weapon systems for which funding and tasking are the responsibility of the Naval Air Systems Command ... -
MIL-V-85245/1
Abstract: THIS SPECIFICATION IS APPROVED FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT OF DEFENSE.
THE COMPLETE REQUIREMENTS FOR PROCURING THE VALVE DESCRIBED HEREIN SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ... -
MS9025 REV A
Abstract: This military standard is approved by the Department of Defense and is mandatory on all activities. Selection for all new engineering and design applications and for repetitive use shall be made from this document. ... -
MIL-W-21112B
Abstract: This specification covers a complete closed circuit television system to be used for the transmission of weather information from a central weather office to twenty (20) receiving points with the capability of expansion. ... -
TT-I-735A
Abstract: This specification covers the requirements for isopropyl alcohol. Intended Use: Grade A isopropyl alcohol as covered by this specification is in tended for use as an intermediate in the manufacture of ... -
MIL-DTL-6060E VALID NOTICE 1
Abstract: This specification covers heat-sealable, watervaporproof bags of complex construction for use in military preservation applications. Intended Use: Bags covered by this specification are intended for use in ...Subject(s) : Barrier material , Container , Double-seam , Gasketed holes , Inspection window , Packaging material , Preservation , -
FED-STD-131C
Abstract: This standard establishes seventeen sheet sizes of diazo paper for the use of all Federal agencies to achieve the optimum degree of standardization. -
MIL-DTL-6363H
Abstract: This specification provides the general and environmental performance requirements for incandescent lamps intended for use primarily in military aircraft applications.
Lamps covered by this specification will be of ...Subject(s) : Aircraft lamps , Aircraft lighting , Bulbs , Illumination , Lighting , Lights , -
MIL-M-85831
Abstract: This specification establishes the requirements for the manufacture and acceptance of a mask to be used with and form part of the Protective Assembly, Helicopter Aircrewman, Chemical, Biological, Radiological (PASS). ...Subject(s) : Agent permeation , Biological , CBR , Chemical , Faceplate , Helicopter aircrewman , Hood , Leakage , Manifold , Mask , Orinasal mask , Radiological , Toxicity , Valve , -
MIL-M-85139
Abstract: This specification defines the performance and test requirements for a pulse-code modulation (PCM) multiplexer referred to herein as the multiplexer. Intended Use: The multiplexer will be used as part of ... -
MIL-L-81561/3
Abstract: This specification is approved for use by the Naval Air Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
W-L-101/114A
Abstract: This specification sheet was approved by the Commissioner, Federal Supply Service, General Services Administration, for the use of all Federal agencies.
(This specification sheet forms a part of the latest issue of ... -
MIL-W-81822/7A
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for acquiring the wire described herein shall consist of this document and the issue in ... -
MIL-R-85111A
Abstract: This specification establishes the performance, design, development and test requirements for the helicopter Recovery Assist, Securing and Traversing (RAST) System. Intended Use: The RAST system to be supplied ... -
MIL-PRF-5425E
Abstract: This specification covers optical quality, transparent, heat-resistant, cast acrylic plastic sheet. The requirements are for flat sheet material that has not been formed. Intended Use: The acrylic plastic ...Subject(s) : Aircraft quality , Formability , Transparent , Weatherability , -
W-L-101/101A
Abstract: This specification sheet was approved by the Commissioner, Federal Supply Service, General Services Administration, for the use of all Federal agencies.
(This specification sheet forms a part of the latest issue of ...