درباره ما
ARMY - AT - Tank-Automotive and Armaments Command: Recent submissions
Now showing items 241-260 of 832
-
A-A-52559A
Abstract: This CID covers a roadway crossing guard made of sheet steel to be used with a 102 millimeter (mm) (4 inch (in.)), lightweight, collapsible hoseline system.Subject(s) : Hoseline system , Petroleum distribution , -
MIL-PRF-53012A
Abstract: This specification covers kits containing items necessary to suspend a 6- or 4-inch collapsible hoseline at road crossings, small streams, and areas where nestable culverts or road guards may not be used.
Hoseline ...Subject(s) : Crossing , Hose saddle , Turnbuckle , -
A-A-52465A
Abstract: This CID covers a VOC compliant, synthetic primer coating that is intended for brush or spray application to a 0.4 - 0.6 mils dry film thickness on the exposed metal surfaces in the internal areas of brake and clutch ... -
A-A-52463B
Abstract: This CID covers requirements for four types of miniature incandescent lamps used in military ground vehicles. -
MIL-DTL-46796D
Abstract: This specification covers several 8 cylinder, V-type, liquid-cooled, 2-stroke-cycle, turbo-supercharged, internal-combustion, compression ignition engines for use in military vehicles (see 6.1). The basic design of these ...Subject(s) : 8V71T Series , Coolant , Glow plug , Internal-combustion , LHR , Liquid-cooled , Low Heat Rejection , Turbocharged , -
MIL-PRF-46176B
Abstract: This specification covers silicone-based hydraulic brake fluid for use in hydraulic brake systems at ambient temperatures ranging from +55°C to −55°C. The fluid is identified by military symbol BFS; and ...Subject(s) : Hydraulic , NATO STANAG 1135 , Viscosity , -
MIL-HDBK-1886
Abstract: This standard covers the procedure for applying tungsten carbide-cobalt coatings to metal parts by the detonation process and the acceptance criteria for the finished parts. Intended Use: This standard is ...Subject(s) : Bond strength , Coating powder , Coating thickness , Cracks , Hardness , apparent , Inclusions , Metallurgical structure , Porosity , apparent , Test specimen , Tolerances , Visual examination , -
MIL-PRF-62361E
Abstract: This specification covers three direct current (dc) drive motors which are intended to operate the optical focusing and controls on the night sight of military ground vehicles.Intended Use: These motors are ...Subject(s) : Bearings , Duty cycle , M901 , M981 , Night sight , Optical focusing , Output shaft , -
MIL-STD-342
Abstract: This standard covers a standard procedure for checking the oil flow through parts, subassemblies, and assemblies of the AGT 1500 engine. Intended Use: The procedure covered by this standard is intended to ...Subject(s) : AGT 1500 engine , Flow check , Lubricating oil , -
MIL-DTL-62099D VALID NOTICE 1
Abstract: This specification covers one type of Modified Commercial Hydraulic Transmission assembly for use in military vehicles. Intended Use: The transmission covered by this specification is military unique. The ...Subject(s) : Converter , drive range , Inhibitor , shift , Lever , throttle valve , -
MIL-HDBK-118
Abstract: GENERAL
The development of the present level of technology has depended on the evolution of methods for the generation, distribution, and use of power. The energy requirements of the domestic population ...Subject(s) : Additives , Bulk modulus , Chemical properties , Classification , Cloud point , Compatibility , Compressibility , Contamination , Density , Emulsion , Fire resistance , Flash point , Freezing point , Guidelines for selection , Lubrication properties , Neutralization number , Nonpetroleum base , Petroleum base , Physical properties , Pour point , Specifications , Storage , Temperature , Viscosity , Volatility , -
A-A-52167A VALID NOTICE 1
Abstract: This CID covers one type of unbacked, nickel base, fiber metal material. -
MIL-PRF-423G
Abstract: This specification covers ripping tools used with a lightweight paving breaker for opening metal drums.Intended Use: The ripping tools are intended for use with paving breakers as specified in MIL-B-385 to ...Subject(s) : Cutting , Lightweight , Opening , Pneumatic-powered , Splitting , -
MIL-DTL-12109/13A VALID NOTICE 1
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification and the issue of ... -
A-A-52625
Abstract: This CID covers one type of liquid lubricant for tire and rim demounting that will Facilitate the separation of the mounted tire bead from the wheel rim. -
MIL-DTL-62542C
Abstract: This specification covers a Ball Screw Linear Actuator (BSLA) for deployment of stabilizing outriggers for the M860A1 Patriot Semitrailer (see 6.1). Intended Use: The intended use of the BSLA covered ...Subject(s) : M8601 semitrailer , Outriggers , Patriot , Return assembly , Rod end bearing , Stabilizing ,