Now showing items 541-560 of 832

    • A-A-52530 VALID NOTICE 1 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2004
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • A-A-52550 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1996
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This CID covers manual release pintle assemblies that are used on trucks and equipment designed for over the road towing within the specified capacities.
    • MIL-DTL-62006C 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1998
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers oil cooler assemblies for air cooling engine and transmission oil (see 6.1), and individual cores which make up the assembly types.
      The types and classes of oil coolers are as follows ...
      Subject(s) : Core , Heat rejection , Hydraulic pressure , Hydrostatic pressure , Pneumatic pressure ,
    • A-A-52614 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1997
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This CID covers a self-contained, battery operated, low illuminance, high visual acuity, directional flashing marker light, herein referred to as light. The light is powered by two "AA" size alkaline batteries and is ...
    • A-A-52446 VALID NOTICE 1 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2004
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • MIL-PRF-2104H 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2004
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This performance specification covers engine oils suitable for lubrication of reciprocating compression-ignition internal combustion engines and for power transmission fluid applications in combat/tactical service equipment ...
      Subject(s) : Engine oil , Heavy duty diesel , Powershift , Tracked vehicles , Wheeled vehicles ,
    • MIL-PRF-62368C 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2009
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers a direct current gearhead motor used to operate the Remote Arming Device (RAD) on a military ground vehicle.Intended Use: The motor covered by this specification is intended for use ...
      Subject(s) : Gearing , No load speed , Remote arming device (RAD) , Stall torque ,
    • A-A-52448A 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2010
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This CID covers one type of plug cock, which is used in the vehicular air brake system.
      Subject(s) : Component , Fittings , Hardware , Vehicle ,
    • A-A-52593A 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2010
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This commercial item description (CID) applies to a single type of pneumatic, portable, reciprocating, metal-cutting saw.
      Subject(s) : Air Powered , Construction , Demolition , Fabrication , Handheld , Tools ,
    • A-A-52519 VALID NOTICE 1 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2004
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • A-A-52027 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1991
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: The General Services Administration has authorized the use of this commercial item description in preference to MIL-P-53065.
      This item description covers an electric motor driven pumping unit and the associated hoses ...
    • MIL-PRF-52666F 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1998
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers 15-, 50-, 100-, and 350-gallon-per-minute (gpm) filter/separators for use in removing undissolved water and solid contaminants from petroleum fuels. Intended Use: The types and ...
      Subject(s) : Airfield refueling system , Aviation fuel , Diesel fuel , Fuel decontamination equipment , Inland petroleum distribution system , Jet turbine fuel , Marine diesel fuel , Water separation ,
    • MIL-PRF-53074A VALID NOTICE 1 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2008
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This performance specification covers mineral oils intended for the lubrication of saturated and superheated systems and uniflow steam engine cylinders (see 6.1).
      The documents listed in this section are specified ...
      Subject(s) : Saturated steam engines , Superheated steam engines , Uniflow engines ,
    • A-A-52599 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1994
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This CID covers manually controlled pneumatic paving breakers, hereinafter called "breakers". The breakers are intended for use in breaking up concrete, brick, asphalt, and macadam and for performing similar demolition work.
    • MIL-DTL-62483A 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1998
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers a 6 cylinder, in-line, liquid cooled, internal combustion diesel engine. Intended Use: The engines covered by this specification are intended for the M809 and M939 series 5 ton ...
      Subject(s) : Air compressor , Alternator system , Lubrication system , Oil filters , Power steering pump , Starter system , Thermostat ,
    • A-A-52477 VALID NOTICE 1 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2004
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • A-A-52524/8 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1995
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This CIDSS covers seals to be used as rotary shaft seals to retain oil and other fluids.
    • A-A-59326/4B 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2011
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification sheet covers a male cam-locking type coupling half to be used in conjunction with coupling halves having a flanged end.
    • A-A-52407A 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1998
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This CID covers the physical properties of four related grades of colored filter glass for use in optical systems. The colored filter glass is referred to herein as "glass".
    • MIL-DTL-0045150M 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2012
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers 2-wheel trailer chassis intended for mounting of various type bodies and equipment used by the United States Armed Forces.Intended Use: Trailers covered by this specification are ...