Now showing items 581-600 of 832

    • A-A-52449 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1993
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: The General Services Administration has authorized the use of this commercial item description (CID) as a replacement for MIL-I-62523 (AT), which is canceled.
    • A-A-52018A VALID NOTICE 1 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2004
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • MIL-HDBK-507 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1998
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This Standard covers procedures for the flash welding of standard low carbon steels with a carbon content not greater than 0.23. Intended Use: The procedures covered by this specification are intended for ...
      Subject(s) : Flash welding , low carbon steel , Low carbon steel , flash welding , Steel , welding of , Welding , Welding , low carbon steel ,
    • A-A-52597 VALID NOTICE 1 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2004
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • MIL-PRF-53068B 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2010
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers tanks, lightweight, collapsible, pillow 160 gallon (nominal) for drinking water storage and transport, hereinafter called "tank", complete with fittings and repair items.Intended Use: ...
      Subject(s) : Bladder , Portable , Rubber and elastomeric ,
    • A-A-52595 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1996
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This CID covers star bits for use with drifter drills.
    • A-A-52538 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1995
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This CID covers one type of 127 × 203 millimeters (mm) (5 by 8 inches (in)) steel log-grab hook, which is intended to facilitate towing and skidding logs.
    • A-A-52033A VALID NOTICE 1 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2008
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This commercial item description (CID) covers a 20 foot (ft) (6.1 meter (m)), reusable, International Organization of Standardization (ISO) 1CX, cargo, open-top, half height container for the transportation, distribution, ...
      Subject(s) : Freight containers , NATO containers , Shipping containers ,
    • A-A-52462A 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2009
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This CID covers two types of leakproof, pressurized, metal, reusable containers/ boxes (hereinafter referred to as containers). They are used as humidity controlled containers for shipment and storage of automotive engines, ...
    • MIL-PRF-62560B 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1997
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers the performance, test, manufacture and acceptance requirements for the distribution box, electrical, shown on Drawing 19207-12292086, herein referred to as EDB (see 6.3.1). Intended ...
      Subject(s) : Cold start , Continuity , Fire suppressant , Overload , Relay , TDC signal , Warning signal ,
    • MIL-PRF-62540A VALID NOTICE 2 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2009
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • A-A-52522B 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1997
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This CID covers automotive brake lining sets and brake lining material used in commercial and military vehicles. Except for the following: heavy construction, heavy military, industrial aeronautical, and any other application ...
    • MIL-PRF-12070E 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1998
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This performance specification covers the requirements for one grade and type of fog oil (see 6.1) with Military Symbol SGF-2 and NATO Code F-62. Intended Use: Fog oil covered by this specification ...
      Subject(s) : Carcinogenicity , Mutagenicity , Overhead petroleum fractions , Smoke ,
    • A-A-59354 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2000
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers four grades of petroleum-based hydraulic fluids, hereafter referred to as "fluid". This product is intended for use in hydraulic systems of metalworking machine tools that require anti-wear oils.
      Subject(s) : Anti-wear oils ,
    • MIL-PRF-45085D 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1997
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers one type of oil cooler assembly for cooling engine and transmission oils (see 6.1) and is comprised of two engine oil cooler core assemblies and one transmission oil cooler assembly.
      The ...
      Subject(s) : Core , Fluid , Temperature ,
    • A-A-52302 VALID NOTICE 2 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2009
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • MIL-DTL-62737A 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1998
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers a Computer Printed Wiring Assembly, referred to herein as the PWA. This is one of six printed wiring assemblies that comprise the Simplified Test Equipment/Internal Combustion Engine-Reprogrammable ...
      Subject(s) : Automated Testing Equipment (ATE) test , Ignition inhibits , Ignition signal outputs , Simplified Test Equipment/Internal Combustion Engine - Reprogrammable (STE/ICE-R) , Vehicle Test Meter (VTM) ,
    • A-A-52524/7A 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2003
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This CIDSS covers seals to be used as rotary shaft seals to retain oil and other fluids.
    • MIL-PRF-71229D 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2011
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This gun mount is used with the 120MM Gun Cannon, M256, and in the Abrams Series Tanks.Intended Use: This hydrospring gun mount is military unique because it is specially designed to interface with the 120MM: ...
      Subject(s) : Ejection , Firing , Gymnastication , Hydrospring , M1A1 tank ,
    • MIL-DTL-62737A VALID NOTICE 1 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2004
      Organization : ARMY - AT - Tank-Automotive and Armaments Command