Now showing items 561-580 of 832

    • MIL-DTL-62741A VALID NOTICE 1 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2004
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • A-A-52491 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1994
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This CID covers the requirements for a thrust ball bearing, referred to herein as "bearing". It consists of two hardened and ground washers (thrust plates) that enclose a complement of precision ground and lapped balls ...
    • A-A-59885 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2012
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This commercial item description identifies the requirements for Corrosion Prevention Compounds (CPCs) to be applied to military combat and tactical vehicle systems and support equipment. The CPC will be applied to painted ...
    • MIL-DTL-62177E VALID NOTICE 1 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2008
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers 7 types of 12-cylinder, 90° V-type, air-cooled, 4 stroke-cycle, turbo-supercharged, internal-combustion, compression-ignition (diesel) engines for use in military vehicles (see 6.1). ...
      Subject(s) : Blow-by , Compression-ignition , Fuel , Horsepower , Internal-combustion ,
    • A-A-52017A 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2002
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This commercial item description (CID) covers a commercial, four-wheel-mounted, diesel-engine-driven air compressor. The air compressor will be complete with all components that are customarily offered with the air compressor ...
      Subject(s) : Four-wheel-mounted , Heavy duty or extreme service ,
    • MIL-DTL-11603G 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1998
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers four types of CD850 series cross-drive transmissions for use in tracked combat vehicles.
      The transmissions covered by this specification are of the types specified below (see 6.2): ...
      Subject(s) : Gear , Gear box , Military combat vehicles ,
    • MIL-DTL-62739A 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1998
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers a Clock/Display Driver Printed Wiring Assembly referred to herein as the PWA. This is one of six printed wiring assemblies which comprise the Simplified Test Equipment/Internal Combustion ...
      Subject(s) : Real time clock , Simplified Test Equipment/Internal Combustion Engine - Reprogrammable (STE/ICE-R) , Vehicle test meter (VTM) ,
    • MIL-PRF-32213 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2009
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This standard establishes, unless otherwise specified, the minimum requirements for engineering acceptance for the operation, performance, and reliability of Exterior Lighting Devices, for military vehicles, with Light ...
      Subject(s) : Water submersion test ,
    • MIL-DTL-12109/8A 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1998
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • A-A-52609 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1996
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This CID covers nickel-chromium/aluminum composite powder used in plasma applications. This powder is primarily intended for use as a plasma spray deposited material providing increased oxidation and hot corrosion resistance.
    • A-A-52524/7A VALID NOTICE 1 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2008
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This CIDSS covers seals to be used as rotary shaft seals to retain oil and other fluids.
    • MIL-PRF-32033 (2) 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2006
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers one type and grade of water-displacing, preservative lubricating oil, known hereinafter as “oil”, for general purpose applications at low temperatures. The oil can be applied by dipping, ...
      Subject(s) : Lubrication , NATO STANAGs 1135 and 7094 ,
    • A-A-52507 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1994
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This CID covers tire chain assemblies and replacement cross chains with cross chain hooks for use on military tactical wheeled vehicles equipped with military single pneumatic tires. Tire chain assemblies are referred to ...
    • A-A-52490A 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1995
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This CID covers requirements for stock power transmission, light-duty, endless V-type belts. The V-belts are for use with fractional-horsepower engines or motors that use small diameter pulleys on drives which generally ...
    • MIL-STD-162E REINST NOTICE 3 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1999
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • A-A-52546 VALID NOTICE 2 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2009
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • A-A-59326/19B 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2011
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers a male by external grooved type XIX coupling half nipple adapter.
    • A-A-52507 VALID NOTICE 2 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2009
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • A-A-52481 VALID NOTICE 1 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2008
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: The General Services Administration has authorized the use of this commercial item description (CID) as a replacement for MS52000A, which is canceled.
    • A-A-52612A 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2010
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This CID covers gasoline and diesel engine driven, two-wheel drive, compact, forward control type buses having a minimum gross vehicle weight (GVW) between 8600 and 13 500 pounds (lbs) [3900 and 6120 kilograms (kg)].
      Subject(s) : Human Transport , Tactical Vehicle ,