IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions

Now showing items 961-980 of 2832

    • IEEE Standard for Wireless Access in Vehicular Environments (WAVE)--Multi-Channel Operation - Corrigendum 1: Miscellaneous Corrections 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Multi-channel wireless radio operations, Wireless Access in Vehicular Environments (WAVE) mode, medium access control, and physical layers, including parameters for priority access, channel switching and routing, management ...
      Subject(s) : IEEE 1609.4 , Wireless Access in Vehicular Environments , multi-channel operation , channel coordination , WAVE , user priority ,

    • IEEE Recommended Practice for Bus and Switchgear Protection in Industrial and Commercial Power Systems 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Covered in this recommended practice is the protection of bus and switchgear used in industrial and commercial power systems. Also provided are fault protection and isolation strategies for the substation bus and switchgear, ...
      Subject(s) : differential protection , IEEE 3004.11™ , double-ended substation , tie circuit breaker , arc flash , percentage differential relay , arc flash protection , high impedance bus differential relay ,

    • IEEE Standard for Ratings and Requirements for AC High-Voltage Circuit Breakers with Rated Maximum Voltage Above 1000 V 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The rating structure for all high-voltage circuit breakers, which include all voltage ratings above 1000 V ac and comprise both indoor and outdoor types, is covered in this standard. Preferred ratings are also provided. ...
      Subject(s) : capacitive current switching , outdoor , transient recovery voltage , related capabilities , power frequency , ratings , operating duty , mechanical endurance , indoor , short-line fault , insulation capability , interrupting time , IEEE C37.04 , short-circuit current ,

    • IEEE Trial-Use Standard for Software Non-Functional Sizing Measurements 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A method for the sizing of nonfunctional software requirements is defined in this standard. It complements ISO/IEC 20926:2009, which defines a method for the sizing of functional user requirements. Non-functional categories ...
      Subject(s) : IFPUG , IEEE 2430 , non-functional size measurements , SNAP , non-functional requirements ,

    • IEEE Standard for Health informatics--Point-of-care medical device communication - Part 10101: Nomenclature 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Within the context of the ISO/IEEE 11073 family of standards for point-of-care (POC) and personal health devices (PHD) medical device communication (MDC), this standard provides the nomenclature that supports both the ...
      Subject(s) : IHE PCD-01 , codes , medical device communication , patient , PHD , nomenclature , independent living , IEEE 11073-10101 , POC , point-of-care , information model , terminology , ontology , personal health devices , service model , semantics ,

    • American National Standard Portable Exposure Rate Meters for Homeland Security 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard describes design criteria, performance requirements, and performance tests for portable exposure rate meters. The PDF of this standard is available in the IEEE GET program. "IEEE Get Program" grants public ...
      Subject(s) : ANSI N42.33 , performance tests , portable radiation detectors , performance requirements , initial response [consequence management] , design criteria ,

    • IEEE Standard for Wearable, Cuffless Blood Pressure Measuring Devices - Amendment 1 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Clarifying and furthering the subject selection of the sample size in the clinical study; looking into the results of the validation study with respect to the patient’s body position and activity level for their applicability ...
      Subject(s) : IEEE 1708a , unobtrusive , cuffless , performance evaluation , IEEE 1708 , blood pressure measuring devices , epidermal hypertension , wearable ,

    • IEEE Standard for Inertial Sensor Terminology 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Terms and definitions relating to inertial sensors are presented in this standard. Usage as understood by the inertial sensor community is given preference over general technical usage of the terms herein. The criterion ...
      Subject(s) : IEEE 528™ , inertial sensor terminology , inertial sensor technology ,

    • IEEE Recommended Practice for Routing Packets in IEEE 802.15.4(TM) Dynamically Changing Wireless Networks - Amendment 1: Fully Defined Use of Addressing and Route Information Currently in IEEE Std 802.15.10 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This amendment to IEEE Std 802.15.10 fully defines how the addressing and route information (already defined in the recommended practice) are to be used by the routing modes (also currently defined in the recommended ...
      Subject(s) : real time link status information exchange , re-establishment of broken/lost routes , support for multicast , IEEE 802.15.10a , support for broadcast , IEEE 802.15.10 , single hop appearance at the networking layer (not breaking standard Layer 3 mechanisms) , frame forwarding , amendment , purging of inactive routes , route establishment , discovery and addition of new nodes , IEEE 802.15.4 , dynamic route reconfiguration ,

    • IEEE Standard for Safety Levels with Respect to Human Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 Hz to 300 GHz 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Safety limits for the protection of persons against the established adverse health effects of exposures to electric, magnetic, and electromagnetic fields in the frequency range 0 Hz to 300 GHz are presented in this standard. ...
      Subject(s) : RF safety , dosimetric reference limit (DRL) , specific absorption rate (SAR) , electric fields , electrostimulation , restricted environment , exposure reference level (ERL) , general public , electrical excitation , electromagnetic fields , radio frequency (RF) , RF exposure , IEEE C95.1 , induced and contact currents , magnetic fields , non-ionizing radiation protection , unrestricted environment ,

    • IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stand-Alone Photovoltaic (PV) Systems 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A method for determining the energy-capacity requirements (sizing) of both vented and valve-regulated lead-acid batteries used in terrestrial stand-alone photovoltaic (PV) systems is described in this recommended practice. ...
      Subject(s) : battery capacity , solar , photovoltaic power systems , lead-acid batteries , photovoltaic (PV) , IEEE 1013 , battery requirements , sizing , sizing lead-acid batteries , stand-alone ,

    • Electrical Safety Manual for Power and Communications Industries [Adapted from the 2017 IEEE NESC(R) Handbook Premier Edition] - Chinese Edition 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This handbook, in its Chinese version, is essential for Chinese speaking communities and assist in areas that need well-defined regulations related to electrical safety for power, energy transmission and distribution, and ...
      Subject(s) : Chinese , communications industry safety; construction of communication lines; construction of electric supply lines; electrical safety; electric supply stations; electric utility stations; high-voltage safety; operation of communications sys­tems; operation of electric supply systems; power station equipment; power station safety; public utility safety; safety work rules; underground communication line safety; underground electric line safety. , Mandarin ,

    • IEEE Guide for Mechanical Interchangeability of Ventilated Dry-Type Transformers 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Characteristics of ventilated dry-type transformers relating to performance, limited electrical and mechanical interchangeability, as well as recommended practice for installation of equipment are set forth in this guide. ...
      Subject(s) : grounding , insulation level , dry-type transformer , construction , tests , impedance , IEEE C57.12.51 , transformer , jacking , surge arresters , winding temperature , electrical , transformer enclosure , temperature rise , mechanical , temperature device , unit substation , forced-air cooled , rating , ambient temperature , taps , performance ,

    • IEEE Standard for Second-Generation IEEE 1857 Video Coding 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A set of tools for efficient video coding, including directional intra prediction, variable block size inter prediction, context adaptive binary arithmetic coding, and the two corresponding decoding procedures, is defined ...
      Subject(s) : slice , quantization , ultra high definition , decoding , transform , picture , UHDTV , intra prediction , entropy coding , encoding , field , inter prediction , frame , transform block , image , prediction unit , Internet video , coding unit , IEEE 1857.4(TM) , prediction block , video surveillance , IPTV ,

    • IEEE Recommended Practice for Network Reference Model and Functional Description of IEEE 802(R) Access Network 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: An access network (which connects terminals to their access routers) utilizing technologies based on the family of IEEE 802(R) standards is specified in this recommended practice. An access network reference model (NRM) ...
      Subject(s) : IEEE 802 , multiple network access , heterogeneous networks , IEEE 802.1CF , access routers ,

    • IEEE Standard for Phasor Data Concentrators for Power Systems 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A phasor data concentrator (PDC) is defined in this standard as a set of functions that may be performed on synchrophasor data. It describes the PMU measurement network and indicates the place of the PDC in it. The standard ...
      Subject(s) : phasor data concentrator , phasor measurement unit , phasor measurement , PDC , IEEE C37.247 , synchrophasor , PMU ,

    • IEEE Standard for the Common Test Interface Pin Map Configuration for High-Density, Single-Tier Electronics Test Requirements Utilizing IEEE Std 1505 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: An extension to the IEEE 1505TM receiver fixture interface (RFI) standard specification is provided in this standard. Particular emphasis is placed on defining within the IEEE 1505 RFI standard a more specific set of ...
      Subject(s) : interface , automatic test systems (ATS) , interface test adapter (ITA) , receiver , unit under test (UUT) , mass termination , interconnecting device (ICD) , scalable , automatic test equipment (ATE) , IEEE 1505.1TM , test program set (TPS) , fixture ,

    • ISO/IEC/IEEE International Standard - Telecommunications and information exchange between information technology systems - Requirements for local and metropolitan area networks - Part 1CM: Time-sensitive networking for fronthaul 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard defines profiles that select features, options, configurations, defaults, protocols, and procedures of bridges, stations, and LANs that are necessary to build networks that are capable of transporting fronthaul ...
      Subject(s) : IEEE 802.1™ , VLAN Bridge , Virtual Local Area Network , IEEE 802® , bridged network , TSN , fronthaul , time-sensitive networking , synchronization , IEEE 802.1CM™ , VLAN ,

    • IEEE Standard for Current Transformers with Maximum Milliampere Secondary Current of 250 mA 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Milliampere-range current transformers (CTs) are not addressed in the scope of IEEE Std C57.13-2016. The evaluation, certification, and specification of milliampere CTs is enabled in this standard similar to the present ...
      Subject(s) : accuracy class , ratio correction factor , TCF , phase angle , high-accuracy , transformer correction factor , revenue metering , instrument transformer , relays , RCF , CT , current transformer , IEEE C57.13.7 , meters , metering , burden ,

    • IEEE Trial-Use Guide for Smart Distribution Applications 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Important smart distribution applications are categorized, descriptions of the critical functions involved are developed, important components of these systems are defined, and examples of the systems that can be considered ...
      Subject(s) : market , power quality , capacity , IEEE 1854™ , power , reliability , efficiency , smart , grid , hosting , distribution ,