درباره ما
API - American Petroleum Institute: Recent submissions
Now showing items 1641-1660 of 1822
-
API PUBL 327
Abstract: 1.2 Scope
The procedures contained in this tutorial address the prevention of leaks or catastrophic loss caused by corrosion of the tank bottom or shell, brittle fracture, and excessive settlement. And, most ... -
API PUBL 4620
Abstract: Scope:
This proceedings represents the 14th biennial International Oil Spill Conference (IOSC). Since its inception a quarter of a century ago, the Conference has slowly evolved ... -
API MPMS 4.5
Abstract: This standard covers the use of displacement, turbine, Coriolis, and ultrasonic meters as master meters.
The requirements in this standard are intended for single-phase liquid hydrocarbons. Meter proving requirements ... -
API MPMS 17.9
Abstract: This standard provides a recommended practice for the calculation and application of a VEF and provides guidelines for data compilation, data validation, and recommendations on the appropriate use of VEF during custody ... -
API STD 653
Abstract: Introduction
This standard covers steel storage tanks built to API 650 and its predecessor API 12C. It provides minimum requirements for maintaining the integrity of such tanks after they have been ... -
API TR 402
Abstract: FOREWORD
API PUBLICATIONS NECESSARILY ADDRESS PROBLEMS OF A GENERAL NATURE. WITH RESPECT TO PARTICULAR CIRCUMSTANCES, LOCAL, STATE, AND FEDERAL LAWS AND REGULATIONS SHOULD BE REVIEWED.
API IS NOT ... -
API SPEC 20A
Abstract: Purpose
This standard specifies requirements for the design, foundry qualification, production, marking and documentation of carbon steel, alloy steel, stainless steel and nickel base alloy castings ... -
API SPEC 19V
Abstract: This International Standard provides the requirements for subsurface barrier valves and related equipment as they are defined herein for use in the petroleum and natural gas industries. Included are the requirements for ... -
API MPMS 2.2A
Abstract: This standard describes the procedures for calibrating upright cylindrical tanks used primarily for the storage of petroleum liquids. Section 2A first addresses procedures for making necessary measurements to determine ... -
API TR 2573
Abstract: This guide covers a summary of the water and sediment determination methods from the API MPMS Chapter 10 for crude oils. The purpose of this guide is to provide a quick reference to these methodologies such that the reader ... -
API MPMS 10.1
Abstract: This test method covers the determination of sediment in crude oils and fuel oils by extraction with toluene. The precision applies to a range of sediment levels from 0.01 to 0.40 % mass, although higher levels may be ... -
API TR 934-B
Abstract: This best practice report complements API 934-A and specifies additional fabrication considerations that should be observed when constructing a new heavy wall pressure vessel using vanadium-modified Cr-Mo materials intended ... -
API SPEC 15LE
Abstract: Purpose
The purpose of this specification is to provide standards for polyethylene (PE) line pipe suitable for use in conveying oil, gas and non-potable water in underground, above ground and reliner ... -
API MPMS 3.5
Abstract: This standard covers accuracy, installation, calibration and verification of automatic tank gauges (ATGs) in custody transfer application in which the ATG is used for measuring the level of light hydrocarbon liquids, such ... -
API MPMS 6.7
Abstract: Scope and Field of Application
This chapter defines viscous hydrocarbons and describes the difficulties that arise when viscous hydrocarbons are raised to high temperatures. The effects of such ... -
API SPEC 7-2 ADD 1
Abstract: This part of ISO 10424 specifies requirements on rotary shouldered connections for use in petroleum and natural gas industries, including dimensional requirements on threads and thread gauges, stipulations on gauging ... -
API MPMS 12.3
Abstract: This standard provides a procedure to quantify the volume shrinkage that occurs when blending lighter hydrocarbons (580-890 kilograms per cubic meter, 112-27 degrees API) with crude oils (644-979 kilograms per cubic meter, ...