درباره ما
API - American Petroleum Institute: Recent submissions
Now showing items 1661-1680 of 1822
-
API STD 600
Abstract: This standard specifies the requirements for a heavy-duty series of bolted bonnet steel gate valves for petroleum refinery and related applications where corrosion, erosion, and other service conditions would indicate a ... -
API PUBL 46201
Abstract: FOREWORD
This proceedings represents the 14th biennial International Oil Spill Conference (IOSC). Since its inception a quarter of a century ago, the Conference has slowly evolved upward as the political winds ... -
API RP 591
Abstract: This recommended practice (RP) provides recommendations for evaluation of a manufacturer's valve construction and quality management system for the purpose of determining a manufacturer's capability to provide new valves ... -
API RP 1004
Abstract: This RP covers required and recommended features of the following aspects of bottom loading and vapor recovery:
a. The configuration and operation of 4-in. (101.6-mm) adapters for bottom loading.
b. Tank vehicles ... -
API RP 2I
Abstract: General
This recommended practice provides guidelines for inspecting mooring components of mobile offshore drilling units (MODUs) and permanent floating installations. Although this document was primarily ... -
API MPMS 4.2
Abstract: This chapter outlines the essential elements of provers that do, and also do not, accumulate a minimum of 10,000 whole meter pulses between detector switches, and provides design and installation details for the types of ... -
API STD 622
Abstract: This standard specifies the requirements for comparative testing of valve stem packing for process applications where fugitive emissions are a consideration. Packing(s) shall be suitable for use at service temperatures ... -
API MPMS 19.3 PART D
Abstract: This test method may be used to establish evaporative deck-seam loss factors and deck-joint loss factors for mechanically-joined deck seams that are used on internal floating-roof tanks. The test method involves passing a ... -
API RP 11S8
Abstract: This Recommended Practice (RP) provides guidelines to establish consistency in the control and analysis of electric submersible pump (ESP) system vibrations. This document is considered appropriate for the testing of ESP ... -
API PUBL 4714
Abstract: Overview
This report provides an introduction to polycyclic aromatic hydrocarbons (PAHs) for persons working in the petroleum industry. It describes what PAHs are and how they are formed; PAH environmental transport, ... -
API RP 505
Abstract: This document applies to the classification of locations for both temporarily and permanently installed electrical equipment. It is intended to be applied where there may be a risk of ignition due to the presence of flammable ... -
API PUBL 1628B
Abstract: Scope:
FOREWORD
API publications may be used by anyone desiring to do so. Every effort has been made by the Institute to assure the accuracy and reliability of the ... -
API BULL 2INT-MET ERTA
Abstract: Introduction
This interim document presents hurricane-driven metocean conditions (wind, wave, current and surge) for use with and reference by other API standards. These conditions are intended to ... -
API STD 624
Abstract: This standard specifies the requirements and acceptance criteria (100 ppmv) for fugitive emission type testing of rising and rising-rotating stem valves equipped with packing previously tested in accordance with API 622. ... -
API PUBL 1628C
Abstract: FOREWORD
API publications may be used by anyone desiring to do so. Every effort has been made by the Institute to assure the accuracy and reliability of the data contained in them; however, the Institute makes ... -
API RP 2009
Abstract: This recommended practice provides guidelines for safely conducting welding, cutting or other hot work activities in reÞneries, gas plants, petrochemical plants and other facilities in the petroleum and petrochemical ... -
API PUBL 1628D
Abstract: 1.1 Scope
The last decade has witnessed an evolution of remediation technologies starting with the early containment or mass reduction techniques to today's very aggressive site closure techniques, which address ...