IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions

Now showing items 1301-1320 of 2832

    • IEEE Standard for Overhead-Type Distribution Transformers 500 kVA and Smaller; High Voltage, 34 500 V and Below; Low Voltage, 7970/13 800Y V and Below 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Certain electrical, dimensional, and mechanical characteristics and safety features of single- and three-phase, 60 Hz, liquid-immersed, self-cooled, overhead-type distribution transformers 500 kVA and smaller, high voltages ...
      Subject(s) : IEEE C57.12.20(TM) , distribution transformer , liquid , overhead , transformer , IEEE Standards , Low voltage , Power distribution , Power transformers , Safety , Transformers , Voltage control ,

    • IEEE Standard for Service Interoperability in Ethernet Passive Optical Networks (SIEPON) 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The system-level requirements needed to ensure service-level, multi-vendor interoperability of Ethernet Passive Optical Network (EPON) equipment is described. The existing IEEE 802.3 and IEEE 802.1 standards, which ensure ...
      Subject(s) : 10G-EPON , 1G-EPON , EPON , Ethernet Passive Optical Network , IEEE 1904.1 , QoS , SIEPON , interoperability , quality of service , service interoperability , Ethernet , IEEE Standards , Interoperability , Passive optical networks , Quality of service ,

    • IEEE Approved Draft Standard Measurement Methods of Emissions from FM and Television Broadcast Receivers in the Frequency Range of 9 kHz to 40 GHz 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Spurious radiation from sound and television broadcast receivers type are possible sources of interference with other radio services. This standard describes the potential sources of spurious radiation from receivers ...
      Subject(s) : FM sound broadcast receivers , antenna radiation , conducted emissions , radiated emissions , spurious emissions , television broadcast receivers , Antenna measurements , Broadcasting , Emissions , IEEE Standards , Radiation monitoring , TV ,

    • IEEE Guide for Surge Protection of DC Power Feeds to Remote Radio Heads 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The waveform of currents likely to exist on dc feeds to equipment located at the tops of towers due to a lightning strike, and the consequences of that waveform for protector design, are described in this guide.
      Subject(s) : IEEE C62.55(TM) , RRH , SPD , lightning , powering feed , protection , remote radio head , surge protective device , surge waveform , towers , DC motors , IEEE Standards , Lightning , Power distribution , Power transmission lines , Radio communication , Surge protection , IEEE standards , lightning protection , surge protection , DC power feeds , IEEE Std C62.55-2017 , lightning strike , remote radio heads , surge protection ,

    • IEC/IEEE International Standard - Power transformers--Part 57-129: Transformers for HVDC applications 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This paper discusses power transformers for HVDC applications.
      Subject(s) : Frequency measurement , IEC , IEC Standards , Loss measurement , Temperature measurement , Voltage measurement , HVDC power convertors , IEEE standards , power transformers , HVDC converter application , IEC-IEEE 60076-57-129 , power transformer ,

    • IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial Applications 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Specific testing requirements for qualifying electrical resistance trace heating for use in industrial applications in ordinary locations, as well as a basis for electrical and thermal design, are included in this standard.
      Subject(s) : IEEE 515(TM) , constant wattage trace heaters , electrical design , heat loss , heat tracing , heater pads , heater panels , heating cables , parallel trace heaters , pipelines , self-regulating trace heaters , series trace heaters , surface trace heating devices , thermal design , trace heaters , trace heating , vessel heater , Heating systems , IEEE Standards , Maintenance engineering , Temperature measurement , Thermal analysis , Trace heating ,

    • IEEE Guide for Evaluation and Reconditioning of Liquid Immersed Power Transformers 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Guidelines for the following are included in the standard: insulating liquid maintenance and diagnostics, liquid reclamation, testing methods for the determination of remaining insulation (paper) life, and upgrades of ...
      Subject(s) : IEEE C57.140(TM) , condition evaluation , life extension , maintenance , power transformers , reconditioning , risk assessment , Aging , IEEE Standards , Liquid cooling , Maintenance engineering , Power transformers , RIsk management ,

    • IEEE Approved Draft Guide for Acceptance and Maintenance of Natural Ester Insulating Liquid in Transformers 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The evaluation and handling procedures for natural ester transformer insulating liquids are covered. The transformer operator is assisted by the purpose of the guide, which is to evaluate the serviceability of new, unused ...
      Subject(s) : dielectric coolant , high fire point liquid , insulating liquid , less-flammable liquid , natural ester liquid , transformer , vegetable oil , Coolants , Dielectrics , Fires , IEEE Standards , Liquid cooling , Power transformers ,

    • (Second Printing) American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz Amendment 1: Test Site Validation 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: U.S. consensus standard methods are specified in Annex D of this amendment for validating standard test sites and alternative test sites used for measurement of radiated radio-frequency (RF) signals and noise emitted from ...
      Subject(s) : ANSI C63.4 , Annex D , NSA , normalized site attenuation , site attenuation , site validation , ANSI Standard , Electrical equipment , Emissions , Noise measurement , Testing , Voltage control ,

    • IEEE Approved Draft Standard for Low-Rate Wireless Networks - Corrigendum 1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This corrigendum corrects errors, inconsistencies, and ambiguities in IEEE Std 802.15.4-2015.
      Subject(s) : 64-bit MAC address , EUI-64 , IEEE 802.15.4(TM) , IEEE Standards , Performance evaluation , Wireless networks ,

    • IEEE Guide for Loss Evaluation of Distribution and Power Transformers and Reactors 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The economic loss evaluation of liquid-filled distribution and power transformers, dry-type distribution and power transformers, and reactors is covered in this guide.
      Subject(s) : IEEE C57.120(TM) , economic evaluation , losses , reactor , transformer , IEEE Standards , Loss measurement , Power system economics , Power transformers , Reactors ,

    • ISO/IEC/IEEE International Standard - Systems and software engineering -- Software life cycle processes 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Subject(s) : acquisition , agreement , architecture , assessment , audit , configuration management , decision management , design , development , disposal , enabling system , implementation , information management , infrastructure , integration , life cycle , life cycle model , life cycle stages , maintenance , measurement , operation , planning , portfolio , process , process improvement , process reference model , process tailoring , process view , product , quality management , requirements , retirement , risk management , service , software , stages , stakeholder requirements , supply , system , system structure , system-of-interest , tailoring , transition , validation , verification , Decision making , IEC Standards , IEEE Standards , ISO Standards , Product life cycle management , Software engineering , Software maintenance , Systems engineering and theory ,

    • IEEE Standard for Local and metropolitan area networks--Frame Replication and Elimination for Reliability 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard specifies procedures, managed objects, and protocols for bridges and end systems that provide identification and replication of packets for redundant transmission, identification of duplicate packets, and ...
      Subject(s) : Bridged Local Area Networks , Bridges , Bridging , Frame Elimination , Frame Replication , IEEE 802(R) , IEEE 802.1CB(TM) , IEEE 802.1Q(TM) , MAC Bridges , Redundancy , TSN , Time-Sensitive Networking , Virtual Bridged Local Area Networks (virtual LANs) , local area networks (LANs) , Bridge circuits , IEEE Standards , Local area networks , Media Access Protocol , Metropolitan area networks , Virtual LAN , IEEE standards , local area networks , metropolitan area networks , protocols , IEEE Std 802.1CB-2017 , IEEE standard , bridge protocols , duplicate packet elimination , frame replication , local area networks , metropolitan area networks , packet identification , packet replication , redundant transmission , reliability elimination ,

    • IEEE Standard for Biometric Open Protocol 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Identity assertion, role gathering, multilevel access control, assurance, and auditing are provided by the Biometric Open Protocol Standard (BOPS). The BOPS implementation includes software running on a client device, a ...
      Subject(s) : BOPS IDS , BOPS admin , BOPS cluster , BOPS server , IDS cluster , IEEE 2410(TM) , Jena Rules , admin console , application , client device IDS , liveness , original site admin , site admin , trusted adjudicated data , user , user device , Biometrics , IEEE Standards , Medical devices , Open systems , Protocols , Trust management , IEEE standards , Java , access protocols , application program interfaces , authorisation , biometrics (access control) , computer network security , open systems , BOPS server , Biometric Open Protocol Standard , IEEE Standard , IEEE Std 2410-2015 , IEEE Std 2410-2017 , JSON , JavaScript Object Notation , REST , Representational State Transfer , Secure Sockets Layer , TLS , Transport Layer Security , application programming interface , communication interface , identity assertion , intrusion detection system , multilevel access control , open SSL , point-and-cut mechanism , role gathering , servlet specification ,

    • IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers Corrigendum 1:Editorial and Technical Corrections 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The definition of constant k in Equation 2 (in 8.3) and line terminal rated voltage in the last paragraph of 10.8.2 are corrected in this corrigendum.
      Subject(s) : IEEE C57.12.90(TM) , IEEE Standards , Immersion cooling , Power distribution , Power transformers , Voltage measurement , IEEE standards , power transformers , IEEE Std C57.12.90-2015 Corrigendum , IEEE Std C57.12.90-2015/Cor 1-2017 , line terminal rated voltage , liquid-immersed distribution transformers , liquid-immersed power transformers , liquid-immersed regulating transformers ,

    • Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless communications devices, 30 MHz to 6 GHz - Part 3: Specific requirements for using the finite difference time domain (FDTD) method for SAR calculations of m 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This part of IEC/IEEE 62704 defines the concepts, techniques, benchmark phone models, validation procedures, uncertainties and limitations of the finite difference time domain (FDTD) technique when used for determining the ...
      Subject(s) : Biomedical measurements , Biomedical monitoring , Finite difference methods , IEC Standards , IEEE Standards , Solid modeling , Specific absorption rate , Time-domain analysis , biological effects of fields , biological effects of microwaves , electromagnetic wave absorption , finite difference time-domain analysis , mobile handsets , radiocommunication , FDTD method , ICNIRP , IEC/IEEE 62704 , IEEE C95.1-2005[1]2 , SAR calculations , body phantoms , electromagnetic field exposure , finite difference time domain method , frequency 30 MHz to 6 GHz , head phantoms , human body , mobile phones , peak spatial-average specific absorption rate , wireless communications devices ,

    • IEC/IEEE International Standard -- Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless communications devices, 30 MHz to 6 GHz - Part 1: General requirements for using the finite-difference time-domain (FDTD 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This part of IEC/IEEE 62704 defines the methodology for the application of the finite-difference time domain (FDTD) technique when used for determining the peak spatial-average specific absorption rate (SAR) in the human ...
      Subject(s) : Biomedical measurements , Finite difference methods , IEC Standards , IEEE Standards , Peak to average power ratio , Specific absorption rate , TIme domain analysis , biological effects of radiation , electromagnetic wave absorption , finite difference time-domain analysis , radiocommunication , DUT , FDTD method , IEC/IEEE 62704 , IEC/IEEE International Standard , SAR calculations , device under test , finite-difference time-domain method , frequency 30 MHz to 6 GHz , peak spatial-average specific absorption rate , wireless communications devices ,

    • IEEE Approved Draft Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary Batteries 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This recommended practice defines the areas of recommended knowledge for installers and maintainers of stationary batteries and related systems to the extent that they affect the battery. Design of the dc system and sizing ...
      Subject(s) : battery , certification , classroom , competent , course , curriculum , education , experience , inspect , install , instruct , knowledge , level , maintenance , monitor , preventative , proactive , proficient , qualification , routine , service , skill , student , teach , technician , test , Batteries , Certification , Education courses , IEEE Standards , Maintenance engineering , Training ,

    • IEEE Approved Draft Standard for Low-Rate Wireless Networks: Amendment Enabling Spectrum Resource Measurement Capability 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This amendment to IEEE Std. 802.15.4 defines MAC related functions to enable spectrum resource management. It specifies - spectrum resource measurements and network performance metrics, such as packet error ratio, delay, ...
      Subject(s) : Spectrum resource measurement , Transmit power control , IEEE Standards , Measurement uncertainty , Power measurement , Power transmission , Radio spectrum management , Resource management ,

    • IEEE Standard for N times 64 kbps Optical Fiber Interfaces between Teleprotection and Multiplexer Equipment 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: An optical interface for use between teleprotection and digital multiplexer equipment that can operate at a data rate of N×64 kbps where N = 1, 2...12 is described in this standard. Requirements for both physical connection ...
      Subject(s) : IEEE C37.94(TM) , alarm indication signal , bit error rate , cyclic redundancy check , loss of frame , loss of signal , multimode optical fiber , multiplexer , remote defect indication , single-mode optical fiber , teleprotection , unit intervals , Alarm systems , Bit error rate , IEEE Standards , Loss measurement , Optical fiber communication , Redundancy , Signal processing , multiplexing equipment , optical fibres , optical interconnections , IEEE Standard , digital multiplexer equipment , optical fiber interfaces , teleprotection equipment ,