IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions

Now showing items 1281-1300 of 2832

    • IEEE Guide for the Design of Low-Voltage Auxiliary Systems for Electric Power Substations 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Considered in this guide are the components of both the ac and dc systems and the provided guidelines and recommendations for designing the appropriate systems for the substation under consideration. This guide includes ...
      Subject(s) : IEEE 1818 , ac system , auxiliary systems , battery , dc system , low voltage , station power , station service , IEEE Standards , Power distribution , Substations , Voltage control , IEEE standards , distribution networks , power supplies to apparatus , power system reliability , substations , IEEE guide , electric power substations , low-voltage auxiliary systems ,

    • IEEE Approved Draft Standard for Telecommunications and information exchange between systems - Local and metropolitan area networks-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications - Amendment 4: Enhancements For 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This amendment specifies protocols, procedures, and managed objects to enhance the ability of IEEE P802.11 media to provide transit links internal to IEEE Std 802.1Q bridged networks.
      Subject(s) : 802.1Q , EPD , SYNRA , bridged , transit link , Bridged circuits , Communications technology , IEEE Standards , Information exchange , Telecommunication network management ,

    • IEEE Recommended Practice for Signal Treatment Applied to Smart Transducers 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Signal processing algorithms and data structure are defined in this recommended practice in order to share and to infer signal and state information of an instrumentation or control system. These algorithms are based on ...
      Subject(s) : IEEE 1451(TM) , IEEE 21451(TM) , oversampling , segmentation , serial , signal shape analysis , smart actuator , smart filtering , smart sensor , smart transducer , time-domain signal analysis , Acuators , Filters , IEEE Standards , Industrial electronics , Signal processing , Signal processing algorithms , Smart devices , Transducers , IEEE standards , data structures , intelligent sensors , signal processing , transducers , API , IEEE Recommended Practice , IEEE Std 21451-001-2017 , application programming interface , control system , data structure , instrumentation system , signal processing algorithm , signal treatment algorithm , signal treatment service , smart transducer ,

    • IEEE Standard for Environmental Assessment of Imaging Equipment - Amendment 1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The following three criteria: Required--End-of-life processing requirements (currently 4.6.2.1); Optional--Manufacturer recyclers or reuses toner material collected through its cartridge and container take-back program ...
      Subject(s) : IEEE 1680.2(TM) , IEEE 1680.2a(TM) , amendment , cartridges , consumables , copiers , digital duplicators , electronic product , end-of-life , environment , environmental leadership , environmental performance , facsimile machines , fax machines , imaging equipment , mailing machines , multifunction devices , printers , scanners , toner , Environmental factors , Facsimile , IEEE Standards , Image processing , Printers ,

    • IEEE Draft Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part VI - Systems Supplied by Current-Regulated Sources 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Applications to three-phase electrical utility systems are described in this Part VI of the IEEE C62.92(TM) series. Definitions and considerations related to system grounding where the dominant sources of system energization ...
      Subject(s) : IEEE C62.92.6(TM) , current-regulated source , ground-fault overvoltage , grounding , inverter , temporary overvoltage , Electricity supply industry , Fault diagnosis , Grounding , IEEE Standards , Inverters , Power distribution , Voltage control , IEEE standards , earthing , electric current control , electricity supply industry , power control , power convertors , IEEE C62.92 series , IEEE draft guide , current-regulated power-regulated power conversion devices , current-regulated sources , neutral grounding , system energization , system grounding , three-phase electrical utility systems ,

    • IEEE Standard for Environmental Assessment of Televisions - Amendment 1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The criterion: Required--End-of-life processing requirements (currently 4.6.2.1) is revised in this amendment.(The PDF of this standard is available to you at no cost to you, sponsored by Green Electronics Council, through ...
      Subject(s) : IEEE 1680.3(TM) , IEEE 1680.3a(TM) , amendment , electronic product , end-of-life , environment , environmental leadership , environmental performance , televisions , Electronics , Environmental factors , IEEE Standards , TV ,

    • IEEE/IEC International Standard - Criteria for accident monitoring instrumentation for nuclear power generating stations 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Established in this standard are criteria for variable selection, performance, design, and qualification of accident monitoring instrumentation for anticipated operational, design basis events and severe accidents.
      Subject(s) : IEEE 497(TM) , accident monitoring , design criteria , display criteria , performance criteria , selection criteria , severe accidents , type variables , Accidents , IEC Standards , IEEE Standards , Monitoring , Nuclear power generation , Safety ,

    • IEEE/CSA Standard for Skin Effect Trace Heating of Pipelines, Vessels, Equipment, and Structures--Application Guide for Design, Installation, Testing, Commissioning, and Maintenance 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: An application guide for the design, installation, testing, commissioning and maintenance of skin effect trace heating systems for pipelines, vessels, equipment, and structures intended for use in general industrial ...
      Subject(s) : CSA C293.2 , IEEE 844.2TM , condensation prevention , freeze protection and temperature maintenance , heating systems , long line , process heating , re-melting solidified fluids , skin effect trace heating , structure heating , thermal insulation , Condensation , Hazardous areas , Heating systems , IEEE Standards , Maintenance engineering , Pipelines , Skin effect , Temperature measurement , Trace heating ,

    • IEEE Approved Draft Recommended Practice for the Design of Buswork Located in Seismically Active Areas 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Subject(s) : Flexible AC transmission systems , IEEE Standards , Seismic measurements , Substations , Voltage control ,

    • IEEE Approved Draft Recommended Practice for Evaluating the Electrical Service Requirements of Industrial and Commercial Power Systems 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard explores commercial, institutional, and industrial design of electrical services, interconnecting with a utility distribution or transmission system. This standard considers the electrical system information ...
      Subject(s) : IEEE 3001.2 , electric rates , service , service entrance , substation , utility billing , utility metering , vaults. , Electricity supply industry , IEEE Standards , Meters , Power system reliability , Substations ,

    • IEEE Approved Draft Guide for Field Testing of Relaying Current Transformers 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide describes field test methods that assure that current transformers are connected properly, are of marked ratio and polarity, and are in a condition to perform as designed both initially and after having been in ...
      Subject(s) : current transformers , excitation , field testing , insulation , polarity , ratio , relaying , Current transformers , Excitation , IEEE Standards , Insulation , Power transformers , Testing ,

    • IEEE Standard for Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements--Part 19: TV White Space Coexistence Methods - Amendment 1: Coexistence Methods for Geo-loca 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The network-based coexistence information exchange among networks and devices to enable network-based coexistence management is defined in this amendment to IEEE 802.19.1-2014. This amendment specifies procedures and ...
      Subject(s) : 5 GHz license-exempt bands , IEEE 802(R) , IEEE 802.19.1(TM) , IEEE 802.19.1a(TM) , TV band white spaces , database , general authorized access in 3.5 GHz bands , geolocation , network-based coexistence , spectrum management , IEEE Standards , Information exchange , Information technology , Local area networks , Metropolitan area networks , Spread spectrum management , TV , White spaces ,

    • IEEE Approved Draft Standard for Information Technology--Telecommunications and information exchange between systems Local and metropolitan area networks--Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Spe 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This amendment defines modifications to the IEEE P802.11ad Physical (PHY) layer and the Medium Access Control (MAC) layer to enable operation in the Chinese millimeter wave frequency band at around 60 GHz. This amendment ...
      Subject(s) : CDMG , CMMG , China directional multi-gigabit , China millimeter-wave multi-gigabit , DBC , DCT , beamforming , dynamic bandwidth control , dynamic channel transfer , opportunistic transmission , spatial sharing , Array signal processing , Bandwidth , China , IEEE Standards , Information exchange , Information technology , Media Access Protocol , Millimeter wave communication , Wireless LAN ,

    • IEEE Approved Draft Guide for Common Format for Naming Intelligent Electronic Devices (COMDEV) 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Subject(s) : IEEE Standards , Iintelligent systems ,

    • IEEE Standard for High-Speed Test Access Port and On-Chip Distribution Architecture 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Circuitry that may be built into an integrated circuit to assist in the test, maintenance, and support of assembled printed circuit boards, assembled multi-die packages, and the test of die internal circuits is defined in ...
      Subject(s) : 3D-IC , BSDL , Boundary-Scan Description Language , High Speed JTAG , I2C , IEEE 1149.1(TM) , IEEE 1149.10(TM) , JTAG , PDL , Procedural Description Language , SERDES , SPI , debug , integrated circuit , system level test , wafer , Boundary conditions , IEEE Standards , Integrated circuits , Maintenance engineering , Printed circuits , System-on-chip , IEEE standards , decoding , encoding , high-speed integrated circuits , integrated circuit packaging , integrated circuit testing , HSTAP , IEEE Std 1149.10-2017 , assembled multi-die packages , assembled printed circuit boards , die internal circuits , distribution architecture , high-speed TAP , integrated circuit , on-chip circuits , packet encoder-decoder ,

    • IEEE Approved Draft Standard Requirements, Terminology, and Test Code for Step-Voltage Regulators 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Description of design types, tables of 50 Hz and 60 Hz ratings, supplementary ratings, construction, and available accessories are provided. Methods for performing routine and design tests applicable to liquid-immersed ...
      Subject(s) : Type A , Type B , control , design tests , position indicator , routine tests , series transformer , tap-changer , universal interface , voltage regulator , Control systems , IEEE Standards , Power transformers , Regulators , Terminology , Voltage control ,

    • IEEE Guide for the Application of Faulted Circuit Indicators on Distribution Circuits 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Information on what a faulted circuit indicator (FCI) is designed to do, along with methods for selecting and applying FCIs for 200 / 600 A distribution circuits are described in this application guide.
      Subject(s) : FCIs , IEEE 1610(TM) , fault circuit indicator , fault indicators , fault sensors , Circuit faults , Fault diagnosis , IEEE Standards , Power distribution , Sensors ,

    • IEEE/CSA Standard for Skin Effect Trace Heating of Pipelines, Vessels, Equipment, and Structures - General, Testing, Marking, and Documentation Requirements 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: General requirements, testing, markings, and documentation for skin effect trace heating systems for pipelines, vessels, equipment, and structures intended for use in general industrial applications are provided in this ...
      Subject(s) : CSA C22.2 No. 293.1 , IEEE 844.1 , condensation prevention , freeze protection and temperature maintenance , heating systems , long line , process heating , re-melting solidified fluids , skin effect trace heating , structure heating , thermal insulation , IEEE Standards , Organizations , Resistance heating , Skin effect , Standards organizations ,

    • IEEE Recommended Practice for Voltage Sag and Short Interruption Ride-Through Testing for End-Use Electrical Equipment Rated Less than 1000 V 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A non-industry-specific recommended practice for voltage sag and short interruption ride-through performance and compliance testing for all electrical and electronic equipment connected to low-voltage power systems that ...
      Subject(s) : IEEE 1668(TM) , equipment testing , immunity , power quality , ride-through , voltage dip , voltage sag , voltage-sag characteristics , IEEE Standard , Power system relaibility , Power system restoration , Testing , Voltage control ,

    • IEEE Guide for Conducting a Transient Voltage Analysis of a Dry-Type Transformer Coil 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: General recommendations for measuring voltage transients in dry-type distribution and power transformers are provided. Recurrent surge voltage generator circuitry, instrumentation, test sample, test point location, mounting ...
      Subject(s) : IEEE C57.12.58(TM) , impulse distribution , recurrent surge generator , transient voltage analysis , Generators , IEEE Standards , Power transformers , Surges , Transient analysis , Voltage measurement ,