IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions

Now showing items 1981-2000 of 2832

    • IEEE C57.13 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard is intended for use as a basis for performance and interchangeability of equipment covered, and to assist in the proper selection of such equipment. Safety precautions are also addressed.
      This standard ...

    • IEEE 1527 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2006
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The scope of this document is the engineering and design of flexible bus connections for bus and equipment in electric power substations.
      Subject(s) : bus , conductor , conductor slack , connections , earthquakes , electrical equipment , flexible bus , flexible buswork , interconnected equipment , interconnection , seismic , substations ,

    • IEEE 1074 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2006
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard provides a process for creating a software project life cycle process (SPLCP). It is primarily directed at the process architect for a given software project. It is the function of the process architect to ...
      Subject(s) : software project life cycle , software project life cycle model , software project life cycle process ,

    • IEEE C57.19.03 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2002
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard applies to outdoor and indoor power apparatus dc bushings of condenser type that have basic impulse insulation levels of 110 kV and above for use as components of oil-Þlled converter transformers and ...

    • IEEE 1290 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2015
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide applies to motors used to drive valve operators in nuclear power-generating stations.
      Purpose
      This guide presents guidelines to evaluate the adequacy of motors used to drive valve ...

    • IEEE 1120 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2004
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Scope:

      Foreword 

      This guide presents a list of factors to consider when planning, designing, installing, ...

      Subject(s) : submarine cable , underwater cable ,

    • IEEE 671 CORR 1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.

    • IEEE 120 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2007
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The methods given here relate to measurements, as made with either analog or digital indicating or integrating instruments, of power, energy, voltage, and current, in dc or ac rotating machines, transformers, induction ...

    • IEEE C37.09 CORR 1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2007
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Introduction
      This corrigendum corrects technical and other non-editorial errors printed in the text of the IEEE Std C37.09-1999, second printing 19 December 2005. It is recalled that IEEE Std ...
      Subject(s) : fast transient recovery voltage , indoor , initial , mechanical endurance , operating duty , outdoor , power frequency , short-circuit current , short-line fault , single-phase testing , test data reporting , three-phase testing , unit test , voltage distribution synthetic test ,

    • IEEE 367 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This recommended practice provides guidance for the calculation of power station GPR and LI voltages, as well as guidance for their appropriate reduction from worst-case values for use in metallic telecommunication protection ...

    • IEEE 1216 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2006
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This application guide provides information on what an FCI is designed to do, and describes methods for selecting FCIs. The application of FCIs to single-phase, 200 A URD circuits is described.
      Subject(s) : overcurrent protection , power distribution ,

    • IEEE 1062 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2015
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This recommended practice describes a set of useful quality considerations that can be selected and applied during one or more steps in a software acquisition process. The recommended practices can be applied to software ...

    • IEEE 1174 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2009
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard defines a serial, full-duplex, asynchronous, 9-pin data terminal equipment (DTE) communications port that follows ANSI/TIA/EIA-574-1990 and related standards. Portions of several standards will be referenced ...

    • IEEE 605 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2008
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The information in this design guide is applicable to both rigid bus and strain bus designs for outdoor and indoor, air-insulated, alternating current substations. Ampacity, radio influence, vibration, and electromechanical ...
      Subject(s) : ampacity , bus support , corona , electromagnetic , finite-element , forces , ice , mounting structure , rigid bus structures , short circuit , strain-bus structures , substation design , wind ,

    • IEEE 8802-A 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2015
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard contains descriptions of the IEEE 802® standards published by the IEEE for frame-based data networks as well as a reference model (RM) for protocol standards. The IEEE 802 architecture is defined, and a ...

    • IEEE C37.233 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2009
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide covers suggested test requirements for power system protection scheme testing, system application tests, the scope and level of tests based on the application, and benefits of the overall protective schemes ...
      Subject(s) : application testing , commissioning testing , design testing , maintenance testing , performance assessment ,

    • IEEE 1629 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2013
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard provides minimum acceptable performance requirements for overhead current collectors used for light rail vehicles, heavy rail vehicles, and trolley bus vehicles. Specific areas to be addressed include oscillation ...

    • IEEE P802.16.1A/D8 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2013
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This amendment to IEEE Std 802.16.1-2012 specifies protocol enhancements to the WirelessMAN-Advanced Air Interface medium access control layer (MAC) and physical layer (PHY) to support high reliablity networks.

    • IEEE 1609.2 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard defines secure message formats and processing for use by Wireless Access in Vehicular Environments (WAVE) devices, including methods to secure WAVE management messages and methods to secure application messages. ...

    • IEEE 421.5 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2005
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Foreword 
      Excitation system models suitable for use in large-scale system stability studies are presented in this recommended practice. With these models, most of the excitation systems currently in widespread use ...
      Subject(s) : excitation limiters , excitation systems , power system stability ,