IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions

Now showing items 1961-1980 of 2832

    • IEEE 1125 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2005
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Foreword
      (This introduction is not part of IEEE Std 1125-1993, IEEE Guide for Moisture Measurement and Control in SF6 Gas-Insulated Equipment.)
      The objectives of this guide are to introduce the importance ...

    • IEEE 1609.3 CORR 1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.

    • IEEE C63.16 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;1993
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Scope:

      Foreword

      This document is intended to serve as a guide when performing electrostatic discharge (ESD) ...

      Subject(s) : air discharge , contact discharge , coupling plane , direct discharge , electrostatic discharge (ESD) , ESD event , ESD simulator , ESD test criteria , ESD waveform characterization , furniture ESD , hand/metal ESD , human/touch ESD , indirect discharge ,

    • IEEE 145 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2004
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: FOREWORD
      Definitions of terms in the field of antennas are provided.
      This document is a revision of IEEE Std 145-1983, IEEE Standard Definitions of Terms for Antennas, and corrects minor errors that ...
      Subject(s) : antennas , definitions , propagation , terminology ,

    • IEEE 743 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;1995
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard will be applicable for specifying test equipment for measuring the analog transmission parameters of subscriber loops, message network trunks, PBX trunks and tie lines, and the analog transmission parameters ...

    • IEEE 551 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2006
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Electric power systems in industrial plants and commercial and institutional buildings are designed to serve loads in a safe and reliable manner. One of the major considerations in the design of a power system is adequate ...
      Subject(s) : available fault current , circuit breaker , circuit breaker applications , fuse , power system voltage , reactors , short-circuit applications guides , short-circuit duties ,

    • IEEE 1484.11.2 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2009
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard describes an ECMAScript application programming interface (API) for content-to-runtimeservices communication. This standard is based on an API defined in AICC/CMI Guidelines for Interoperability, Revision 3.4 ...
      Subject(s) : API , application programming interface , computer managed instruction , content object , ECMAScript , ECMAScript API , learning content , learning management system , LMS , RTS , runtime service ,

    • IEEE 802.21D 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2015
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Mechanisms to enable multicast group management for MIH services is specified in this standard. The specification defines management primitives and messages that enable a user to join, leave or update group membership and ...

    • IEEE C37.20.7 INT 1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2009
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Scope:

      This guide establishes a method by which metal-enclosed switchgear, as defined by IEEE Std C37.20.2-1999 and IEEE Std C37.20.3-2001, can ...

      Subject(s) : accessibility , arc , bus , compartment , internal arcing fault , metal-clad switchgear , metal-enclosed interrupter switchgear , metal-enclosed switchgear , overpressure , protection ,

    • IEEE 1312 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2004
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard provides preferred voltage ratings above 230 kV nominal for alternating-current (ac) systems and equipment.
      Subject(s) : alternating-current electrical systems , electrical systems , system voltage , voltage ratings ,

    • IEEE 260.3 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Only signs and symbols used in writing mathematical text are contained in this Standard. Special symbols peculiar to certain branches of mathematics, such as non-Euclidean Geometries, Abstract Algebras, Topology, and ...

    • IEEE 378 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;1986
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Purpose
      (1) Provide common terminology among users and manufacturers
      (2) Assist users to properly specify and manufacturers to meaningfully describe essential performance parameters
      (3) Assist ...

    • IEEE 762 INT 1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: (This Foreword is not a part of ANSI/IEEE Std 762-1987, IEEE Standard Definitions for Use in Reporting Electric Generating Unit Reliability, Availability, and Productivity.)
      Measures of generating unit performance have ...

    • IEEE 1076 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2004
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Intent and scope of this standard
      The intent of this standard is to define VHSIC Hardware Description Language (VHDL) accurately. Its primary audiences are the implementor of tools supporting the ...

    • IEEE 1493 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2006
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide serves two primary purposes. The first is to outline many of the issues associated with using a solvent as an electric cable cleaner. The second is to provide a variety of tests that can be used for evaluating ...

    • IEEE 998 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide identifies and discusses design procedures to provide direct stroke shielding of outdoor distribution, transmission, and generating plant substations. Known methods of shielding from direct strokes were investigated ...

    • IEEE 7-4.3.2 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard serves to amplify criteria in IEEE Std 603™-2009, IEEE Standard Criteria for Safety Systems for Nuclear Power Generating Stations, to address the use of computers as part of safety systems in nuclear ...
      Subject(s) : commercial grade item , diversity , safety systems , software , software tools , software verification and validation ,

    • IEEE 1142 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2009
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide provides cable manufacturers and users with extensive information on the design, testing, application, and installation of low, medium, and high-voltage power cables, as well as communication, control and ...
      Subject(s) : laminate sheaths , longitudinal water blocking , moisture impervious , powders , radialmoisture barriers , sealed overlap , water-swellable tapes , yarns ,

    • IEEE 1189 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2007
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Forward
      [This introduction is not a part of IEEE Std 1189-1996, IEEE Guide for Selection of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Applications.]
      Valve-regulated lead-acid (VRLA) batteries are ...

    • IEEE C37.04B 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2008
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Abstract: This standard is revised to change the descriptions of the standard transient recovery voltage (TRV) envelope and ratings. This is applicable for ac high-voltage circuit breakers rated above 1000 ...
      Subject(s) : transient recovery voltage ,