Now showing items 2201-2220 of 2832

    • IEEE 1609.3 CORR 2 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2014
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
    • IEEE 1455 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2006
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Foreword 
      Those characteristics of a dedicated short-range communications (DSRC) system that are independent of the Physical and Data Link Layers (ISO model Layers 1 and 2) are specified. The required and optional ...
      Subject(s) : access control , application layer , automatic vehicle identification , AVI , beacon , Commercial Vehicle Operations , CVO , data authentication , data privacy , data security , dedicated shortrange communications , DSRC , electronic toll collection , ETC , Layer 7 , Mailbox , reader , resource manager , smart card , tag , transponder , vehicle to roadside communications , VRC ,
    • IEEE 902 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;1998
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Introduction
      Even with the best design and equipment, the expected safety and reliability performance of a power system is largely dependent on the quality and capability of its operation and maintenance. ...
      Subject(s) : electrical hazards , electrical maintenance , electrical safety program , fire protection , grounding , infrared , inspection , maintenance , operation protective devices , record keeping , safety single-line diagram , testing ,
    • IEEE C57.12.10 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This voluntary consensus standard sets forth the requirements for power transformer application. This standard is intended to be used as a basis for performance, interchangeability, and safety of the equipment covered and ...
      Subject(s) : autotransformer , dimensional characteristics , electrical characteristics , load tap changer , mechanical characteristics , power transformer , single-phase , three-phase ,
    • IEEE C57.138 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2005
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This recommended practice covers routine impulse tests performed on distribution transformers, as required in IEEE Std C57.12.00-1993, and described in subclause 10.4 of IEEE Std C57.12.90-1993.
      Distribution transformers ...
    • IEEE 492 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2011
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Application
      This guide covers general recommendations for the operation, loading, and maintenance of synchronous hydro-generators and generator/motors. It does not apply to synchronous machines having ...
    • IEEE 1783 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2009
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The guide specifies procedures for testing equipment when external insulation of the test object is subjected to combinations of contamination, ice, snow, or cold fog. The methods are applicable only to tests on equipment ...
      Subject(s) : cold fog , contamination , high-voltage testing , ice , icing , insulators , salt fog , snow ,
    • IEEE 390 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2007
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard pertains to pulse transformers for use in electronic equipment. For the various types of these transformers, the peak power transmitted ranges from a few milliwatts to kilowatts; and the peak voltage transmitted ...
    • IEEE 377 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2003
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
    • IEEE 1377 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard defines a table structure for utility application data to be passed between an End Device and any other device. It neither defines device design criteria nor specifies the language or protocol used to transport ...
    • IEEE 15026-4 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2013
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This part of ISO/IEC 15026 gives guidance and recommendations for conducting selected processes, activities and tasks for systems and software products requiring assurance claims for properties selected for special attention, ...
    • IEEE 1680.1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2009
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard defines environmental performance criteria for personal computer products, including desktop computers, notebook computers, and computer displays. The environmental performance criteria relate to reduction ...
      Subject(s) : computer , computer display , electronic product , electronic product design , environment , environmental leadership , environmental performance , notebook computer , personal computer ,
    • IEEE 295 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2007
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: FOREWORD 
      The Electronics Transformer Technical Committee for several years has been working towards the generation of a Standard for electronics purpose power transformers even while under AIEE ...
    • IEEE 1416 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2004
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: These recommendations apply to the following cases:

      a) When a gas-insulated substation (GIS) has to be connected to another GIS, in the case of a ...

    • IEEE 1671 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: ATML defines a standard exchange medium for sharing information between components of ATSs. This information includes test data, resource data, diagnostic data, and historic data. The exchange medium is defined using XML. ...
      Subject(s) : ATE description , ATE test results , ATML , ATS , automatic test equipment , automatic test markup language , automatic test system , interface test adapter , ITA , SI , synthetic instrumentation , test configuration , unit under test , UUT description , UUT maintenance , XML instance document , XML schema ,
    • IEEE C57.150 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide provides recommendations and considerations for the transportation of transformers and reactors rated 10 000 kVA or higher. It provides information for minimizing the risk of damage and delays in the moving of ...
    • IEEE 1175.2 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2011
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This recommended practice presents four contexts for a computing system tool's interconnections that offer insight into the operational problems of interconnecting computing system tools with their environment. This ...
      Subject(s) : Computer-Aided Software Engineering (CASE) tools ,
    • IEEE 450 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This document provides recommended maintenance, test schedules, and testing procedures that can be used to optimize the life and performance of permanently-installed, vented lead-acid storage batteries used in standby ...
      Subject(s) : acceptance test , battery , battery capacity , battery installation , battery maintenance , battery service test , battery terminal voltage , connection resistance , electrolyte level , equalize charge , float voltage , IEEE 450 , measurements , modified performance , performance test , replacement criteria , service test , specific gravity , standby power applications , state of charge , test , test-discharge rate , vented lead-acid battery ,
    • IEEE 1361 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2003
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide contains a tutorial on lead-acid battery technology, battery charging characteristics, and a laboratory test procedure to evaluate charge parameters and battery performance. The information on leadacid battery ...
      Subject(s) : lead-acid battery test procedure , lead-acid battery tutorial , photovoltaic (PV) battery characteristics , PV battery selection , PV battery test procedure , PV systems ,
    • IEEE 1671.6 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2008
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.