IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions

Now showing items 2221-2240 of 2832

    • IEEE C135.64 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide defines testing procedures for the slip and pull-out strength testing of bolted dead end strain clamps for use on transmission and distribution lines. This guide covers initial certification testing. For routine ...

    • IEEE 649 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2011
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard describes the basic principles, requirements, and methods for qualifying Class 1E motor control centers for both harsh and mild environment applications in nuclear power generating stations.
      Pur ...
      Subject(s) : aging , analysis , class 1E , environmental qualification , harsh environment , mcc , mild environment , motor control center , operating experience , operational aging , qualification , qualified life , seismic , test ,

    • IEEE 1329 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard provides techniques for objective measurement of electroacoustic and voice-switching characteristics of speakerphones that connect directly or indirectly to an analog or digital telephone network. Due to the ...
      Subject(s) : full duplex , half duplex , handsfree , speakerphone , voice switching ,

    • IEEE 393 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2007
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard specifies applicable tests to describe the significant properties of magnetic cores used in electronic applications. It is primarily concerned with magnetic cores of the type used in electronics transformers, ...
      Subject(s) : electromagnetic measurements , magnetic cores ,

    • IEEE N42.22 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2002
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The standard provides a description of the criteria necessary for manufacturers to maintain and assure measurement traceability of radionuclides to the National Institute of Standards and Technology (NIST). These criteria ...

    • IEEE 1003.26 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2003
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.

    • IEEE C57.12.44 INT 1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2008
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard describes certain electrical, dimensional, and mechanical characteristics and takes into consideration certain safety features of three-phase, 60 Hz, low-voltage (600 V and below) network protectors. They are ...
      Subject(s) : grid network , network , protector , spot network ,

    • IEEE 269 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard provides the techniques for objective measurement of electroacoustic characteristics of analog and digital telephones, handsets and headsets. Application is in the frequency range from 100 Hz to 8500 Hz. ...
      Subject(s) : analog telephones , digital telephones , electroacoustic measurements on telephones , handsets , headsets , IEEE 269 , telephony , voice transmission performance ,

    • IEEE C57.12.58 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2008
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Foreword
      This guide covers general recommendations for measuring voltage transients in dry-type distribution and power transformers.
      Insulation is recognized as one of the most important constructional ...

    • IEEE 647 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2006
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Part I (clauses 3 through 8) of this standard is a specification format guide for the preparation of a laser gyro specification. Part II (clauses 9 through 12) is a compilation of recommended procedures for testing a laser ...
      Subject(s) : dithered gyro , gyro , gyroscope , inertial instrument , inertial sensor , optical gyro , resonant cavity , ring laser gyro , RLG , Sagnac effect , Sagnac gyro ,

    • IEEE 388 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2007
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard pertains to transformers and inductors of both the saturating and nonsaturating type that are used in electronic power conversion equipment.
      Power conversion equipment includes items known as inverters, ...

    • IEEE NESC 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A. Covered
      See Figure 011-1.
      The NESC covers:
      1. Supply and communication facilities (including metering) and associated work practices employed by a public or private electric supply, communications, railway, ...
      Subject(s) : communications industry safety , construction of communication lines , construction of electric supply lines , electric supply stations , electric utility stations , electrical safety , high-voltage safety , operation of communications systems , operation of electric supply systems , power station equipment , power station safety , public utility safety , safety work rules , underground communication line safety , underground electric line safety ,

    • IEEE 1451.3 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2003
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Foreword
      The main objectives of this standard are to:
      — Enable plug and play at the transducer level by providing a common communication interface for transducers which are physically separated
      — Enable ...

    • IEEE 1036 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide applies to the use of 50 Hz and 60 Hz shunt power capacitors rated 2400 Vac and above, and assemblies of such capacitors. Included are guidelines for the application, protection, and ratings of equipment for the ...
      Subject(s) : capacitor , capacitor banks , externally fused , fuseless , internally fused , power factor correction , shunt power capacitors ,

    • IEEE 112 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2004
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard covers instructions for conducting and reporting the more generally applicable and acceptable tests of polyphase induction motors and generators. Many of the tests described may be applied to both motors and ...
      Subject(s) : acceptance and performance testing , generators , induction , machines , motors , polyphase ,

    • IEEE N323B 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2003
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard establishes minimum acceptance performance requirements for portable radiation protection instruments used for detection and measurement of ionizing radiation fields or levels of radioactive surface contamination ...
      Subject(s) : instrumentation , near background , portable survey , radiation ,

    • IEEE 293 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2005
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: INTRODUCTION
      This Test Procedure is a compilation of recommended rate gyro test procedures derived from those currently in use, including test conditions to be considered. In some cases alternate methods ...

    • IEEE 1609.2 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2013
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard defines secure message formats and processing for use by Wireless Access in Vehicular Environments (WAVE) devices, including methods to secure WAVE management messages and methods to secure application messages. ...

    • IEEE 241 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;1997
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: FOREWORD
      The purpose of IEEE Std 241-1990, the "Gray Book," is to promote the use of sound engineering principles in the design of commercial buildings. It is hoped that it will alert the electrical engineer or designer ...
      Subject(s) : Commercial buildings , electric power systems , load characteristics ,

    • IEEE C57.12.91 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2011
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard describes methods for performing tests specified in IEEE Std C57.12.01™ and other referenced standards applicable to dry-type distribution and power transformers.1 It is intended for use as ...
      Subject(s) : dry-type transformer , IEEE C57.12.91 , power transformer ,