درباره ما
AASHTO - American Association of State Highway and Transportation Officials: Recent submissions
Now showing items 2061-2080 of 2524
-
AASHTO HDG TOC
Abstract: Foreword: The Highway Subcommittee on Design, as part of its charge, prepares and keeps current publications pertaining to principles, methods, and procedures of roadway design, including practices to protect and to enhance ... -
AASHTO M 103M/M 103
Abstract: This specification covers carbon steel castings for general applications that require up to 485 MPa [70 ksi] minimum tensile strength.
Note 1 - The grades covered by this specification represent materials ... -
AASHTO HB-17 DIVISION I SEC 11
Abstract: GENERAL: The purpose of this section is to provide a location for indexing aluminium design, material fabrication, and construction specifications. -
AASHTO UGCR-1
Abstract: Foreword: In Utah—when the new 14-mile Legacy Parkway north of Salt Lake City opened in late 2008, motorists saw their commute drop from an average of 44 minutes to 14 minutes. ... -
AASHTO T 222
Abstract: This method covers the making of nonrepetitive static plate load test on subgrade soils and flexible pavement components, in either the compacted condition or the natural state, and is intended to provide data for use in ... -
AASHTO T 250
Abstract: The procedures used for testing thermoplastic traffic line material are described in this method. This includes the method for obtaining a representative test sample, preparation of the test specimens, and performing the ... -
AASHTO T 213M/T 213
Abstract: This test method covers procedures for determining the mass [weight] of coating on aluminumcoated iron or steel sheets and wire, and on other aluminum-coated iron and steel articles.
The final results determined by ...Subject(s) : Aluminum coating , coating mass [weight] , steel sheets , steel wire , -
AASHTO T 218
Abstract: This method covers the procedure for sampling hydrated lime from various conveyors, points of shipment, and while in various states of storage.
The values stated in SI units are to be regarded as the standard.
Refer ... -
AASHTO T 237
Abstract: The methods given cover the examination of epoxy resin adhesives for use in bonding traffic markers to pavements, cured concrete to cured concrete, fresh concrete to cured concrete, and are divided into two parts:
Part ... -
AASHTO TP 90
Abstract: The blister test is used to determine the interfacial fracture energy (IFE) of hot-poured crack sealant at the application temperatures.
The blister test is a fracture test. The objective of the test is to apply tensile ... -
AASHTO T 158
Abstract: These test methods cover the determination of the relative quantity of mixing water that will bleed from a sample of freshly mixed concrete. Two test methods that differ primarily in the degree of vibration to which the ...Subject(s) : Bleeding , concrete , bleeding of , -
AASHTO T 226
Abstract: This test method covers the determination of the strength of cylindrical rock specimens in an undrained state under triaxial compression loading. The test provides data useful in determining the strength and elastic ... -
AASHTO T 98
Abstract: This test method covers determination of the fineness of portland cement as represented by a calculated measure of specific surface, expressed as square centimeters of total surface area per gram, or square meters of total ...