درباره ما
NEMA C80.1
Electrical Rigid Steel Conduit (ERSC)
Organization:
NEMA - National Electrical Manufacturers Association
Year: 2005
Abstract: This standard covers the requirements for electrical rigid steel conduit for use as a raceway for wires or cables of an electrical system. Finished conduit is produced in nominal 10 ft (3.05 m) lengths, threaded on each end with one coupling attached. It is protected on the exterior surface with a metallic zinc coating or alternate corrosion protection coating (as specified in the 13th edition of UL 6 in Clauses 5.3.3, 6.2.4, 7.8 and 7.9) and on the interior surface with a zinc or organic coating.
This standard also covers conduit couplings, elbows, nipples and conduit lengths other than 10 ft (3.05 m).
Properly assembled systems of conduit, couplings, elbows and nipples, manufactured in accordance with this standard, and other identified fittings provide for the electrical continuity required of an equipment grounding conductor.
This standard also covers conduit couplings, elbows, nipples and conduit lengths other than 10 ft (3.05 m).
Properly assembled systems of conduit, couplings, elbows and nipples, manufactured in accordance with this standard, and other identified fittings provide for the electrical continuity required of an equipment grounding conductor.
Collections
:
Show full item record
| contributor author | NEMA - National Electrical Manufacturers Association | |
| date accessioned | 2017-09-04T16:47:41Z | |
| date available | 2017-09-04T16:47:41Z | |
| date copyright | 08/18/2005 | |
| date issued | 2005 | |
| identifier other | BTRJIBAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/111078 | |
| description abstract | This standard covers the requirements for electrical rigid steel conduit for use as a raceway for wires or cables of an electrical system. Finished conduit is produced in nominal 10 ft (3.05 m) lengths, threaded on each end with one coupling attached. It is protected on the exterior surface with a metallic zinc coating or alternate corrosion protection coating (as specified in the 13th edition of UL 6 in Clauses 5.3.3, 6.2.4, 7.8 and 7.9) and on the interior surface with a zinc or organic coating. This standard also covers conduit couplings, elbows, nipples and conduit lengths other than 10 ft (3.05 m). Properly assembled systems of conduit, couplings, elbows and nipples, manufactured in accordance with this standard, and other identified fittings provide for the electrical continuity required of an equipment grounding conductor. | |
| language | English | |
| title | NEMA C80.1 | num |
| title | Electrical Rigid Steel Conduit (ERSC) | en |
| type | standard | |
| page | 21 | |
| status | Active | |
| tree | NEMA - National Electrical Manufacturers Association:;2005 | |
| contenttype | fulltext |