درباره ما
SAE - SAE International: Recent submissions
Now showing items 901-920 of 16264
-
Marine Control Cable Connection - Engine Clutch Lever
Abstract: The purpose of this SAE Recommended Practice is to provide guides toward standard conditions for operating marine hydraulic transmissions where push-pull cable control is applicable.For control cable information see SAE J917. -
Medium/Heavy-Duty E/E Systems Diagnosis Nomenclature
Abstract: This SAE Recommended Practice is applicable to all E/E systems on MD and HD vehicles. The terms defined are largely focused on compression-ignited and spark-ignited engines. Specific applications of this document include ... -
Standard Rainflow File Format
Abstract: This SAE Standard provides a definition of a rainflow file format. This type of simple text file would contain all relevant information about the rainflow cycle content of a time history. Included information are Comments, ... -
Automotive Ductile Iron Castings for High Temperature Applications
Abstract: This SAE Standard covers the hardness, chemical analysis and microstructural requirements for ductile iron castings intended for high temperature service in automotive and allied industries. Commonly known as SiMo ductile ... -
Hose Gauge Evaluation Procedure
Abstract: The Gauge Evaluation Procedure Task Force was formed by the Non-Hydraulic Hose Committee to develop a gauge evaluation procedure to be used when evaluating the capability of gauges used for hose measurement. The use of a ... -
Liquid Penetrant Test Methods
Abstract: The scope of this SAE Information Report is to supply the user with sufficient information so that he may decide whether liquid penetrant test methods apply to his particular inspection problem. Detailed technical information ... -
Taxonomy and Definitions for Terms Related to Shared Mobility and Enabling Technologies
Abstract: This Recommended Practice provides a taxonomy and definitions for terms related to shared mobility and enabling technologies. Included are functional definitions for shared modes (e.g., carsharing, bikesharing, ridesourcing, ... -
Methods for Determining Physical Properties of Polymeric Materials Exposed to Hydrocarbon Fuels or Their Surrogates and Their Blends with Oxygenated Additives
Abstract: This SAE Recommended Practice applies to determining worst-case fuel or test fluid surrogate, conditioning test specimens in worst-case fuel(s)/surrogate(s) prior to testing, individual tests for properties of polymeric ... -
High-Preload Deflection and Compressibility Test Procedures for Friction Materials
Abstract: This standard specifies a method for testing and measuring the deflection of friction materials assemblies and compressibility of friction materials. This standard applies to disc brake pad assemblies and its coupons or ... -
Strain-Life Fatigue Data File Format
Abstract: SAE format for a SIMPLE Strain-Life Fatigue Data Exchange File Format. The object of this SAE Standard is to provide a simple common way to exchange strain-life fatigue data collected from ASTM E 606 axial fatigue test data. -
Infrared Testing
Abstract: The scope of this SAE Information Report is to provide general information relative to the nature and use of infrared techniques for nondestructive testing. The document is not intended to provide detailed technical ... -
Magnesium Wrought Alloys
Abstract: This SAE Standard covers the most common magnesium alloys used in wrought forms, and lists chemical composition and minimum mechanical properties for the various forms. A general indication of the usage of the various ... -
Clip Fastener Fitting
Abstract: This SAE Standard covers material and dimensional requirements of steel clip fastener fittings. These fittings are intended for use in hydraulic systems on industrial equipment primarily in mining applications. -
Physical Layer, 250 Kbps, Un-Shielded Twisted Pair (UTP)
Abstract: This document describes a physical layer utilizing Unshielded Twisted Pair (UTP) cable with extended stub lengths for flexibility in ECU placement and network topology. Also, connectors are not specified.CAN controllers ... -
Primary Single Phase Nominal 120 VAC Wiring Distribution Assembly Design—Truck and Bus
Abstract: This SAE Recommended Practice covers the design and application of primary on-board wiring distribution system harnessing for surface vehicles. This document is intended for single phase nominal 120 VAC circuits that provide ... -
Light Vehicle Dry & Wet Stopping Distance Test Procedure
Abstract: This document establishes best practices to measure vehicle stopping distance on dry or wet asphalt in a straight path of travel intended for the purpose of publishing stopping distance by manufacturers and media organizations ... -
Bearing Bushing Alloys Chemical Composition of SAE Bearing and Bushing Alloys
Abstract: Compositions apply to the finished bearing or bearing lining, not necessarily to the alloy at an intermediate processing stage. All values not given as ranges are maxima. (See Tables 1 through 5.) -
Methods of Measuring Decarburization
Abstract: This report covers the recommended practice for the evaluation and measurement of decarburization in ferrous material. Included are definitions of types with charts and micrographs and methods most commonly used for the ... -
Clamping Force Test Procedure
Abstract: This SAE Recommended Practice is a test procedure to obtain force data for self-compensating type clamps (SAE Type E, CTB, and CTW). -
Low Speed Enveloping Test with Perpendicular and Inclined Cleats
Abstract: This SAE Recommended Practice describes a test method for measuring the forces and moments generated at a spindle when a tire rolls over a rectangular obstacle, cleat, at very low speed. The cleat used in a particular test ...