درباره ما
CSA CAN3-C108.1.5-M85
Line Impedance Stabilization Network (LISN) - First Edition
Organization:
CSA - CSA Group
Year: 1985
Abstract: This Standard outlines the technical properties of and stabilization network (LISN) used in the measurement emissions in the frequency range 0.01 to 30 MHz. specifications for a line impedance of conducted electromagnetic
The LISN is applicable to the measurement of electromagnetic interference voltages originating from electrical apparatus and conducting into the public power network. The purpose of the LlSN is to provide a defined impedance over the specified frequency range between each of the power terminals and ground of the equipment under test (EUT) and also to isolate the test circuit from unwanted radio frequency signals from the public power network
For specific measurement procedures reference must be made to the appropriate technical standard applicable to the equipment under test. Described in Appendix A is a typical method of measurement that is intended to illustrate the general use of the LlSN in the measurement of the conducted emissions.
The LISN is applicable to the measurement of electromagnetic interference voltages originating from electrical apparatus and conducting into the public power network. The purpose of the LlSN is to provide a defined impedance over the specified frequency range between each of the power terminals and ground of the equipment under test (EUT) and also to isolate the test circuit from unwanted radio frequency signals from the public power network
For specific measurement procedures reference must be made to the appropriate technical standard applicable to the equipment under test. Described in Appendix A is a typical method of measurement that is intended to illustrate the general use of the LlSN in the measurement of the conducted emissions.
Collections
:
-
Statistics
CSA CAN3-C108.1.5-M85
Show full item record
| contributor author | CSA - CSA Group | |
| date accessioned | 2017-09-04T16:50:44Z | |
| date available | 2017-09-04T16:50:44Z | |
| date copyright | 1985.01.01 | |
| date issued | 1985 | |
| identifier other | WOVCDFAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/114361 | |
| description abstract | This Standard outlines the technical properties of and stabilization network (LISN) used in the measurement emissions in the frequency range 0.01 to 30 MHz. specifications for a line impedance of conducted electromagnetic The LISN is applicable to the measurement of electromagnetic interference voltages originating from electrical apparatus and conducting into the public power network. The purpose of the LlSN is to provide a defined impedance over the specified frequency range between each of the power terminals and ground of the equipment under test (EUT) and also to isolate the test circuit from unwanted radio frequency signals from the public power network For specific measurement procedures reference must be made to the appropriate technical standard applicable to the equipment under test. Described in Appendix A is a typical method of measurement that is intended to illustrate the general use of the LlSN in the measurement of the conducted emissions. | |
| language | English | |
| title | CSA CAN3-C108.1.5-M85 | num |
| title | Line Impedance Stabilization Network (LISN) - First Edition | en |
| type | standard | |
| page | 20 | |
| status | Active | |
| tree | CSA - CSA Group:;1985 | |
| contenttype | fulltext |