MIL-I-81969/8B

Abstract

This specification is approved for use by all Departments and Agencies of the Department of Defense. <br>The complete requirements for acquiring the tools described herein shall consist of this document and the latest issue of specification MIL-I-81969. <a id="MBHPDAAAAAAAAAAA-X1" name="MBHPDAAAAAAAAAAA-X1"><img alt="FIGURE 1. Installing tool (-01, -03, -05, -07, -09, -11, -13, -205,&#10;-207, -209)." /></a> <br><a id="MBHPDAAAAAAAAAAA-X3" name="MBHPDAAAAAAAAAAA-X3"><img alt="FIGURE 2. Removal tool (-02, -04, -06, -08, -10, -12, -14, -206, -208,&#10;-210)." /></a> <a id="MBHPDAAAAAAAAAAA-X4" name="MBHPDAAAAAAAAAAA-X4"><img alt="TABLE I. Dash numbers, dimensions." /></a> </span><pre> Inch mm Inch mm Inch mm Inch mm ------------ ------------ ------------ --------------- .0002 0.01 .0825 2.10 .1875 4.76 .287 7.29 .001 0.03 .084 2.13 .189 4.80 .291 7.39 .002 0.05 .085 2.16 .191 4.85 .300 7.62 .003 0.08 .0975 2.47 .1915 4.86 .317 8.05 .004 0.10 .1045 2.65 .194 4.93 .3175 8.06 .0045 0.11 .1085 2.76 .2135 5.42 .320 8.13 .007 0.18 .110 2.79 .215 5.46 .335 8.51 .008 0.20 .1110 2.85 .216 5.49 .343 8.71 .010 0.25 .113 2.87 .232 5.89 .350 8.89 .015 0.38 .1335 3.39 .236 5.99 .401 10.19 .025 0.64 .134 3.40 .2495 6.34 .475 12.07 .0515 1.31 .1345 3.41 .250 6.35 .550 13.97 .053 1.35 .137 3.48 .251 6.38 .650 16.51 .054 1.37 .1565 3.98 .254 6.45 .950 24.13 .0595 1.51 .158 4.01 .262 6.65 1.100 27.94 .061 1.55 .1590 4.04 .274 6.96 1.200 30.48 .062 1.57 .1595 4.05 .2765 7.02 4.500 114.30 .0645 1.64 .161 4.09 .278 7.06 5.500 139.70 .0740 1.88 .162 4.11</pre> <br> <br>