درباره ما
MIL-PRF-85570E
CLEANING COMPOUNDS, AIRCRAFT, EXTERIOR
Organization:
NAVY - AS - Naval Air Systems Command
Year: 2012
Abstract: The cleaning compounds covered by this specification are used for cleaning the exterior surface of aircraft.Intended Use: The cleaning compound exceeds commercially available cleaning compounds in order to provide for the cleaning of military aircraft high gloss and camouflage paint systems, low gloss tactical paint schemes, and cleaning exhaust track and gun blast soils. Specifically, the cleaning compounds are intended for use in cleaning painted or unpainted aircraft surfaces. Type I may be used in general cleaning of aircraft, provided that local regulations do not limit the use of aromatic solvents or volatile organic compounds. Type IA is a 1:4 dilution of Type I, packaged in an aerosol container. Type IW is a pre-saturated wipe consisting of a 1:4 dilution of Type I. Type II may be used in general cleaning of aircraft, for both high gloss and camouflage paint systems. Type II RTU is 1:4 dilution packaged in a 32 oz pump spray or 5 gallon can. Type III contains a very fine abrasive and is designed for cleaning exhaust track and gun blast soils from high gloss paint systems. Type IV contains non-abrasive particulate rubber and can be used on low gloss tactical paint scheme coatings to clean stubborn areas such as boot marks and smudges, as well as gun blast and exhaust track soil. Type V can be used in wheel wells, wing butts, and other areas where complete rinsing with water can be tolerated.
Subject: Aerosol
Collections
:
Show full item record
| contributor author | NAVY - AS - Naval Air Systems Command | |
| date accessioned | 2017-09-04T17:05:15Z | |
| date available | 2017-09-04T17:05:15Z | |
| date copyright | 03/27/2012 | |
| date issued | 2012 | |
| identifier other | YBWSUEAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/128784 | |
| description abstract | The cleaning compounds covered by this specification are used for cleaning the exterior surface of aircraft.Intended Use: The cleaning compound exceeds commercially available cleaning compounds in order to provide for the cleaning of military aircraft high gloss and camouflage paint systems, low gloss tactical paint schemes, and cleaning exhaust track and gun blast soils. Specifically, the cleaning compounds are intended for use in cleaning painted or unpainted aircraft surfaces. Type I may be used in general cleaning of aircraft, provided that local regulations do not limit the use of aromatic solvents or volatile organic compounds. Type IA is a 1:4 dilution of Type I, packaged in an aerosol container. Type IW is a pre-saturated wipe consisting of a 1:4 dilution of Type I. Type II may be used in general cleaning of aircraft, for both high gloss and camouflage paint systems. Type II RTU is 1:4 dilution packaged in a 32 oz pump spray or 5 gallon can. Type III contains a very fine abrasive and is designed for cleaning exhaust track and gun blast soils from high gloss paint systems. Type IV contains non-abrasive particulate rubber and can be used on low gloss tactical paint scheme coatings to clean stubborn areas such as boot marks and smudges, as well as gun blast and exhaust track soil. Type V can be used in wheel wells, wing butts, and other areas where complete rinsing with water can be tolerated. | |
| language | English | |
| title | MIL-PRF-85570E | num |
| title | CLEANING COMPOUNDS, AIRCRAFT, EXTERIOR | en |
| type | standard | |
| page | 25 | |
| status | Active | |
| tree | NAVY - AS - Naval Air Systems Command:;2012 | |
| contenttype | fulltext | |
| subject keywords | Aerosol | |
| subject keywords | Degreaser | |
| subject keywords | Gel | |
| subject keywords | Hazardous air pollutant | |
| subject keywords | Pump dispenser | |
| subject keywords | Solvent | |
| subject keywords | Volatile organic compound |