درباره ما
NAVY - AS - Naval Air Systems Command: Recent submissions
Now showing items 1681-1700 of 2147
-
MIL-HDBK-704-1
Abstract: This handbook provides guidance on test procedures for demonstration of utilization equipment to determine compliance with the aircraft electrical power characteristics of MIL-STD-704. This handbook is for guidance only ...Subject(s) : Aircraft , electrical power , Aircraft , electrical test , Electrical operating conditions , Equipment , utilization , Power groups , Specification , utilization equipment , -
MIL-C-19064B
Abstract: This specification covers one type of connector for connecting the oxygen regulator hose to the demand mask breathing hose. Intended Use: The connector covered by this specification is intended for use in ... -
A-A-59315/5
Abstract: This commercial item description sheet (CID) covers a commercially pure (CP) aluminum powder that is applied using either plasma arc or combustion gas (flame spray) techniques. -
MIL-STD-2071A
Abstract: This standard establishes the procedures, requirements, and instructions for testing chaff payloads under flight conditions to determine compliance with the associated system performance or detail specification specified ...Subject(s) : Airborne , Countermeasures , -
MIL-C-85001/171
Abstract: This specification establishes the design, performance, manufacture, and acceptance requirements for a chaff countermeasures designated RR-171/ALE. This equipment consists of a chaff roll set comprised of two chaff rolls ... -
MIL-DTL-85052/3C
Abstract: Intended Use: These clamps are intended for use as follows: Temperature range: - 65 to + 500 °F. These clamps have cushions, which have been compounded for high temperature capability at the ... -
MIL-I-85352/1A
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ... -
MIL-B-913/14
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ... -
MIL-I-81969/19B
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ... -
MIL-STD-2225
Abstract: Vibration and noise measurements under controlled test conditions provide baseline data which can be used to ascertain relative bearing quality. The causes of vibration and noise are complex phenomena affected by many ...Subject(s) : Test procedures , -
MIL-C-22520/19
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for procuring the crimping tools described herein shall consist of this document ...