NAVY - AS - Naval Air Systems Command: Recent submissions
Now showing items 1701-1720 of 2147
-
MIL-P-85511A
Abstract: This specification establishes the requirements for the manufacture and acceptance of the TDU-32 series aerial banner target panel assembly, referred to herein as the panel assembly. Intended Use: The panel ...Subject(s) : Aerial Gunnery Banner , Aerial Tow Target , Banner , Panel Assembly , Gunnery Banner , Target , Banner , Panel Assembly , Tow Target , Banner , Panel Assembly , -
MIL-V-81356B
Abstract: This specification covers one type of valve assembly for use in aircraft fuel tanks to sense and relieve positive or negative tank pressures and control pressurization and venting of the tank during fuel transfer and ...Subject(s) : Valve , Fuel Systems , Valve , Pressure-Vent Control , Vent , Aircraft Fuel Tank , -
MIL-PRF-32295A
Abstract: This specification covers non-aqueous cleaners that are free of hazardous air pollutants (HAP) and contain a low amount (no more than 25 grams per liter) of volatile organic compounds (VOC), for cleaning aircraft components, ...Subject(s) : Solvent , -
MIL-C-22520/2C
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for procuring the crimping tools described herein shall consist of this document and the ... -
MIL-C-85254
Abstract: This specification establishes the requirements for the manufacture and acceptance of a linear-shaped charge, critical item, referred to herein as the charge. Intended Use: The charge is intended to open the ... -
MIL-S-22518/1
Abstract: This specification sheet is approved for use by the Naval Air Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements ... -
MIL-C-81511/55B
Abstract: This specification is approved for use by the Naval Air Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements for ... -
MIL-DTL-81581/8A
Abstract: This specification sheet covers the requirements for communication cable assemblies used with the applicable hose assemblies utilized in the Naval aviator’s life support systems.Intended Use: The cable ... -
MIL-D-81607
Abstract: The equipment covered by this specification shall be an Alphanumeric Display device intended for use in transmitting, receiving, storing and editing teletypewriter messages.
The equipment covered by this specification ... -
MIL-T-22030
Abstract: This specification covers one type of remote indicating, fuel, rate of flow transmitter requiring frequency control of the input voltage. Intended Use: The type fuel flowmeter transmitter covered by this ... -
MIL-C-81343C
Abstract: The equipment covered by this specification shall be capable of performing the functions described herein. The Radar Interface Unit shall accept outputs from the AN/APS-115 Radar, IFF unit, and Data Processing System and ... -
MIL-C-8514C
Abstract: This specification covers one type and grade of pretreatment coating for use on clean metal surfaces of all types as a treatment prior to application of the coating system. The smooth finish spray-type coating may also be ...

درباره ما