NAVY - AS - Naval Air Systems Command: Recent submissions
Now showing items 1881-1900 of 2147
-
MIL-DTL-19246E
Abstract: This specification covers type MC-3A oxygen mask hose connector for connecting the oxygen mask hose to the oxygen regulator hose. Intended Use: The connector attaches the oxygen mask hose to the oxygen regulator ...Subject(s) : Regulator , -
MIL-B-23431B
Abstract: The equipment covered by this specification shall receive interrogations from X-band radars and transmit a reply to the interrogation on another frequency within the X-band. It shall also transmit X-band pulses when ...Subject(s) : Band , Cable assembly , Control , Duplexer , Modulator , Pulse , Receiver , Signal transmitter , -
MIL-PRF-85704C
Abstract: This specification establishes the requirements for three types of turbine engine gas path cleaning compounds, two are used for off-line (starter cranked) engine cleaning operations and one is used for on-line (fired) ...Subject(s) : Cleaner , aqueous , Cleaner , solvent emulsion , -
MIL-B-913/12
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ... -
L-P-410A
Abstract: This specification covers the requirements of rigid plastic polyamide (nylon) molded and cast parts, rods, tubing, bushing stock, tubular bar, and flats for mechanical and electrical applications.
The polyamide rods, ... -
MIL-I-8671D
Abstract: This specification establishes the requirements and testing procedures for aircraft droppable store (see 6.4.8) installations and associated release systems. Excluded from this specification are the installation ...Subject(s) : Aerodynamic aircraft store/missile compatibility , Bomb bay door controls , Bomb rack locks , Clearance , Control panels , Safety precautions , Stores management system (SMS) , -
MIL-S-85333
Abstract: This specification establishes the requirements for manufacture and acceptance of the MARK 33 MOD 1 safety-arming device, referred to herein as the S-A device. Intended Use: The MARK 33 MOD 1 safety-arming ... -
MIL-HDBK-221 CHG NOTICE 1
Abstract: This Handbook embodies requirements and design objectives for fire protection for all types of manned Naval aircraft (including helicopters) with turbine engines.

درباره ما