MIL-B-23431B

Abstract

The equipment covered by this specification shall receive interrogations from X-band radars and transmit a reply to the interrogation on another frequency within the X-band. It shall also transmit X-band pulses when triggered by the associated equipment (see 6.12) in the "All-Weather Carrier Landing System (ACLS)" mode of operation. <br>A radar beacon AN/APN-154(V) shall consist of the following items in the quantity indicated: </span><pre> <u>Item</u> <u>Quantity</u> Receiver-Transmitter, Radar 1 Control 1 Duplexer 1 Cable Assembly, Radio Frequency 2</pre> <br> <strong>Beneficial comments, (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commanding Officer, Naval Air Warfare Center Aircraft Division Lakehurst, Systems Requirements Department, Code SR3, Lakehurst, NJ 08733-5100, by using the self-addressed Standardization Document Proposal (DD Form 1426) appearing at the end of this document or by letter.</strong> <br>The receiver-transmitter shall be available in the following configurations. The particular configuration is to be specified in the contract or purchase order (see <a>6.11</a>). <pre> Applicable <u>Type designation</u> <u>Brief description</u> <u>paragraph</u> RT-681/APN-154(V) High band receiver - flange 3.5.1 mount (see <a>figure 1</a>) table I RT-762/APN-154(V) Low band receiver - side 3.5.1 mount (see <a>figure 2</a>) table I RT-763/APN-154(V) <a><u>1</u>/</a> High band receiver - side 3.5.1 mount (see <a>figure 2</a>) table I RT-764/APN-154(V) Low band receiver - flange 3.5.1 mount (see <a>figure 1</a>) table I RT-681A/APN-154(V) High band receiver - flange 3.5.1 mount and elapsed time table I indicator (see <a>figure 3</a>) RT-762A/APN-154(V) Low band receiver - side 3.5.1 mount with elapsed time table I indicator (see <a>figure 4</a>) RT-763A/APN-154(V) <a><u>1</u>/</a> High band receiver - side 3.5.1 mount and elapsed time table I indicator (see <a>figure 4</a>) RT-764A/APN-154(V) Low band receiver - flange 3.5.1 mount with elapsed time table I indicator (see <a>figure 3</a>) RT-763B/APN-154(V) <a><u>1</u>/</a> High band receiver - side 3.5.1 mount and elapsed time indicator (see <a>figure 4</a>) RT-763C/APN-154(V) <a><u>1</u>/</a> High band receiver - side 3.5.1 mount and elapsed time indicator (see <a>figure 4</a>) RT-763D/APN-154(V) <a><u>1</u>/</a> High band receiver - side 3.5.1 mount and elapsed time indicator (see <a>figure 4</a> and <a>1.3.1</a>) RT-763E/APN-154(V) <a><u>1</u>/</a> High band receiver - side 3.5.1 mount and elapsed time table I indicator (see <a>figure 4</a> and <a>1.3.2</a>)</pre> <br> <br>The RT-763D/APN-154(V) and the RT-763/APN-154(V) configurations incorporate external trigger capability for ACLS operation. <br>The RT-763E/APN-154(V) configuration contains a solid-state oscillator. <br>The control shall be available in the following configurations, which shall be specified in the contract or purchase order. <pre> Applicable <u>Type designation</u> <u>Brief description</u> <u>paragraph</u> C-4419/APN-154(V) Control without elapsed time 3.5.2 indicator C-4419/APN-154(V) Control with elapsed time 3.5.5 indicator C-4419B/APN-154(V) Control with ACLS test light 3.5.6 and switch</pre> <br> <br>The duplexer shall be available in the following configuration. <pre> Applicable <u>Type designation</u> <u>Brief description</u> <u>paragraph</u> CU-1104/APN-154(V) Duplexer - circulator 4-port 3.5.3</pre> <br> <br>The radio frequency (rf) cable assemblies shall be available in the following configurations. <pre> Applicable <u>Type designation</u> <u>Brief description</u> <u>paragraph</u> CG-2574/APN-154(V) RF cable - 6 inches long 3.5.4 CG-2574A/APN-154(V) RF cable - 8 inches long 3.5.4</pre> <br> <br><b><u>Intended Use:</u></b> The radar beacon shall be for use in Naval aircraft in conjunction with radar direction finding and ranging to increase the range capability of the system. <br>