درباره ما
MIL-I-22110C
INHIBITORS, CORROSION, VOLATILE, CRYSTALLINE POWDER
Organization:
NAVY - AS - Naval Air Systems Command
Year: 1985
Abstract: This specification gives the requirements for volatile corrosion inhibitors (VCI) in crystalline powder form. The corrosion inhibiting vapors from the crystals shall provide corrosion protection for most metals under specific conditions. The crystals shall be one type for general application. Intended Use: The VCI crystals covered by this specification are intended for use as a preservative for ferrous, aluminum, aluminum-base alloys and components containing zinc plate, cadmium, zinc-base alloys, magnesium-base alloys, lead-base alloys and alloys of other metals (including solders and brazing alloys) having less than 30 percent of zinc and 9 percent of lead. (Direct contact with nonferrous metals except aluminum and aluminum-base alloys shall be avoided. Direct contact with nonmetals shall be avoided unless the specific inhibitor has passed the compatibility test specified in MIL-I-8574.) Unit packs must be sealed to prevent escape of VCI vapors. Application instructions for the use of VCI crystals may be found in MIL-I-8574.
Collections
:
Show full item record
| contributor author | NAVY - AS - Naval Air Systems Command | |
| date accessioned | 2017-09-04T17:08:21Z | |
| date available | 2017-09-04T17:08:21Z | |
| date copyright | 09/26/1985 | |
| date issued | 1985 | |
| identifier other | YKELDAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/131873 | |
| description abstract | This specification gives the requirements for volatile corrosion inhibitors (VCI) in crystalline powder form. The corrosion inhibiting vapors from the crystals shall provide corrosion protection for most metals under specific conditions. The crystals shall be one type for general application. Intended Use: The VCI crystals covered by this specification are intended for use as a preservative for ferrous, aluminum, aluminum-base alloys and components containing zinc plate, cadmium, zinc-base alloys, magnesium-base alloys, lead-base alloys and alloys of other metals (including solders and brazing alloys) having less than 30 percent of zinc and 9 percent of lead. (Direct contact with nonferrous metals except aluminum and aluminum-base alloys shall be avoided. Direct contact with nonmetals shall be avoided unless the specific inhibitor has passed the compatibility test specified in MIL-I-8574.) Unit packs must be sealed to prevent escape of VCI vapors. Application instructions for the use of VCI crystals may be found in MIL-I-8574. | |
| language | English | |
| title | MIL-I-22110C | num |
| title | INHIBITORS, CORROSION, VOLATILE, CRYSTALLINE POWDER | en |
| type | standard | |
| page | 12 | |
| status | Active | |
| tree | NAVY - AS - Naval Air Systems Command:;1985 | |
| contenttype | fulltext |