درباره ما
Search
CSV
RISAWS CAWF: Characterization of Arc Welding Fume
Abstract: Introduction
During the process of welding, metal vapors are produced in the electric arc. As these vapors cool and solidify, a fume is formed that may be a potential health hazard to the welder and to others working in the same area. Such fine aerosols are all irritating to the respiratory system. Yet some fumes may potentially...
During the process of welding, metal vapors are produced in the electric arc. As these vapors cool and solidify, a fume is formed that may be a potential health hazard to the welder and to others working in the same area. Such fine aerosols are all irritating to the respiratory system. Yet some fumes may potentially...
AWS B2.1-5A-223: Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), E9018-B3, 1/8 through 1/2 in. Thick, As-Welded Condition; 1/8 through 1-1/2 in. Thick, PWHT Condition, Primarily Pipe Applications Site License - 1st Edition
Abstract: The data to support this Standard Welding Procedure Specification (SWPS) were derived from the above-listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding Research ...
AWS AWS FUMES AND GASES: Contents
Abstract: Abstract
The environment surrounding many welding processes contains fumes (particulate matter) that may be harmful (toxic) or relatively hanniess and gases that may have pulmonary or non-pulmonary effects. This report summarizes five experimental studies and several literature surveys (conducted by Battelle Memorial Institute-C...
The environment surrounding many welding processes contains fumes (particulate matter) that may be harmful (toxic) or relatively hanniess and gases that may have pulmonary or non-pulmonary effects. This report summarizes five experimental studies and several literature surveys (conducted by Battelle Memorial Institute-C...
AWS B5.9: Specification for the Qualification of Welding Supervisors
Abstract: This standard establishes requirements for the qualification of Welding Supervisors. It describes how personnel are qualified, the principles of conduct, and the practice by which qualification may be maintained.
This specification does not address all safety issues associated with welding. It is the responsibility of the employer to establish ...
This specification does not address all safety issues associated with welding. It is the responsibility of the employer to establish ...
AWS A5.16/A5.16M: Specification for Titanium and Titanium-Alloy Welding Electrodes and Rods - 6th Edition
Abstract: This standard specifies requirements for the classification of solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium-alloys. The classification of the solid wires and cut lengths and spools of wire is based on their chemical composition.
For titanium welding consumables, the compositions of the wire electrodes ...
For titanium welding consumables, the compositions of the wire electrodes ...
AWS F1.5M: Methods for Sampling and Analyzing Gases from Welding and Allied Processes
Abstract: This publication includes the recommended procedures for sampling and methods of analysis for gases that may be formed during the use of various welding and allied processes. These gases include the following:
(1) Ozone ...
(1) Ozone ...
AWS A5.02/A5.02M: Specification for Filler Metal Standard Sizes, Packaging, and Physical Attributes - First Edition; Second Printing; Incorporates Errata: April 2008
Abstract: This document, together with an AWS filler metal specification, is intended to describe a uniform method for providing those specific details needed for filler metal procurement which consist of the following:
(1) The ...
(1) The ...
AWS B2.1-1-209: Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition (Primarily Pipe Applications) Site License
Abstract: The data to support this Standard Welding Procedure Specification (WPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ...
AWS A5.19: Specification for Magnesium Alloy Welding Electrodes and Rods
Abstract: This specification prescribes requirements for the classification of bare magnesium alloy welding alectrodes and rods for use with the gas metal arc, gas tungsten arc, oxyfuel gas, and plasma arc welding processes.