درباره ما
AASHTO M 32M/M 32
Standard Specification for Steel Wire, Plain, for Concrete Reinforcement
Year: 2009
Abstract: This specification covers cold-drawn, steel wire, as drawn or galvanized, to be used as such or in fabricated form, for the reinforcement of concrete, in sizes not less than 2.03 mm [0.080 in.] nominal diameter.
Supplement S1 describes high-strength wire, which shall be furnished when specifically ordered. It shall be permissible to furnish high-strength wire in place of regular wire if mutually agreed to by the purchaser and the manufacturer.
The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. (The inch-pound units are shown in brackets except in Table 6.)
Supplement S1 describes high-strength wire, which shall be furnished when specifically ordered. It shall be permissible to furnish high-strength wire in place of regular wire if mutually agreed to by the purchaser and the manufacturer.
The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. (The inch-pound units are shown in brackets except in Table 6.)
Subject: Concrete reinforcement
-
Statistics
AASHTO M 32M/M 32
Show full item record
| contributor author | AASHTO - American Association of State Highway and Transportation Officials | |
| date accessioned | 2017-09-04T17:22:09Z | |
| date available | 2017-09-04T17:22:09Z | |
| date copyright | 01/01/2009 | |
| date issued | 2009 | |
| identifier other | ZVHXMCAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/145394 | |
| description abstract | This specification covers cold-drawn, steel wire, as drawn or galvanized, to be used as such or in fabricated form, for the reinforcement of concrete, in sizes not less than 2.03 mm [0.080 in.] nominal diameter. Supplement S1 describes high-strength wire, which shall be furnished when specifically ordered. It shall be permissible to furnish high-strength wire in place of regular wire if mutually agreed to by the purchaser and the manufacturer. The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. (The inch-pound units are shown in brackets except in Table 6.) | |
| language | English | |
| title | AASHTO M 32M/M 32 | num |
| title | Standard Specification for Steel Wire, Plain, for Concrete Reinforcement | en |
| type | standard | |
| page | 8 | |
| status | Active | |
| tree | AASHTO - American Association of State Highway and Transportation Officials:;2009 | |
| contenttype | fulltext | |
| subject keywords | Concrete reinforcement | |
| subject keywords | reinforced concrete | |
| subject keywords | reinforcing steels | |
| subject keywords | steel wire |