درباره ما
AWS - American Welding Society: Recent submissions
Now showing items 101-120 of 451
-
AWS B5.2
Abstract: This specification establishes the minimum requirements for an employer’s (company’s) internal written practice for the training, qualification, and that company’s certification of Welding Inspector ... -
AWS QC10
Abstract: This specification establishes the minimum requirements for trainees to receive AWS SENSE training certificate for full or partial completion of the Level I—Entry Welder program. SENSE training organizations are free ... -
AWS B2.1-1-021
Abstract: Foreword This foreword is not part of this standard but is included for informational purposes only. The American Welding Society and the Welding Research Council have joined in a cooperative effort to generate standard ... -
AWS F1.6
Abstract: This guide outlines four methods of estimating airborne emissions from the arc welding process. This document does not cover disposal of collected wastes from the welding process, including collected welding fume. Emissions ... -
AWS B2.1-1-316
Abstract: This standard contains the essential welding variables for carbon steel in the thickness range of 1/8 inch [3 mm] through 1-1/2 inch [38 mm], using semiautomatic gas metal arc welding. It cites the base metals and operating ... -
AWS D9.1/D9.1M
Abstract: This code covers the arc and braze welding requirements for nonstructural sheet metal fabrications using the commonly welded metals available in sheet form. Requirements and limitations governing procedure and performance ... -
AWS NAVSEA B2.1-1-305
Abstract: The data to support this Standard Welding Procedure Specification for Naval Applications (SWPS-N) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the ... -
AWS C3.6M/C3.6
Abstract: Scope: This specification presents the minimum fabrication and quality requirements for the furnace brazing of materials such as steels, stainless steels, nickel, nickel alloys, copper, copper alloys, and heat- or ... -
AWS A1.1
Abstract: Scope: This metric practice guide is based on the International System of Units (SI) as defined in the U.S. Federal Register notice of July 28, 1998, “Metric System of Measurement: Interpretation of the International ... -
AWS C7.6/C7.6M
Abstract: Scope: This specification covers processing and quality control requirements for Laser Hybrid Processing. Equipment includes any laser source (examples include, but are not exclusive to CO2, Nd: YAG, Diode, Ruby, Yb Fiber ... -
-
AWS G1.10M
Abstract: Scope: Scope, Purpose, and Range of Application These guidelines list and describe defects and flaws in welded joints in thermoplastic materials. The objective is to make possible a generally valid evaluation giving ... -
AWS J1.2M/J1.2
Abstract: Scope: While resistance welding machines vary considerably in size and complexity, there are basic principles applicable to the installation, operation, maintenance, and troubleshooting. This document is intended to provide ... -
AWS C1.4M/C1.4
Abstract: Scope: This specification establishes welding equipment requirements and welding procedures used to produce welds of acceptable quality in coated and uncoated carbon and low-alloy steels, including mild steels and high ... -
AWS B2.1-8-308
Abstract: Scope: The data to support this Standard Welding Procedure Specification for Naval Applications (SWPS-N) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under ... -
AWS QC47
Abstract: Scope: Requirements. This specification describes the accreditation of AWS Accredited Test Facilities (ATF), the qualification and testing of welders, and the certification of welders desiring to be listed in the AWS ... -
AWS B1.10M/B1.10
Abstract: Scope: This standard provides a reference guide for the kinds of nondestructive examination methods that are used to verify that welds meet the requirements of a code or specification. The nondestructive examination methods ... -
AWS B2.2/B2.2M
Abstract: Scope: This specification provides the requirements for qualification of Brazing Procedure Specifications (BPSs). This specification also provides requirements for the performance qualification of brazers and brazing ... -
AWS D1.8/D1.8M
Abstract: Scope: The provisions of this code supplement the provisions of AWS D1.1/D1.1M, Structural Welding Code—Steel, and shall apply to the design, fabrication, quality control, and quality assurance of welded joints ... -
AWS A5.36/A5.36M
Abstract: Scope: This specification prescribes requirements for the classification of carbon and low-alloy steel flux cored electrodes for flux cored arc welding (FCAW), either with or without shielding gas, and carbon and low-alloy ...