درباره ما
AWS - American Welding Society: Recent submissions
Now showing items 81-100 of 451
-
AWS A5.2/A5.2M
Abstract: This specification prescribes requirements for the classification of carbon and low-alloy steel rods for oxyfuel gas welding. This specification makes use of both U.S. Customary Units and the International System of Units ... -
AWS EG2.0
Abstract: EG2.0 establishes a skill standard by defining the recommended minimum welder training requirements for a Level I—Entry Welder in accordance with AWS QC10, Specification for Qualification and Certification of SENSE ... -
-
AWS D3.6M
Abstract: This code covers underwater welding in both dry and wet environments. Five basic methods for underwater welding are covered in this specification as follows: (1) Welding in a pressure vessel in which the pressure is reduced ... -
AWS API-M
Abstract: API 1104 provides a list of eight permitted welding processes. They are listed below: (a) Shielded metal arc welding (SMAW). (b) Submerged arc welding (SAW). (c) Gas tungsten arc welding (GTAW). ... -
AWS D10.18M/D10.18
Abstract: The ferritic/austenitic duplex stainless steels (DSSs) discussed in this document have proven to be weldable using proper welding procedures. The processes GTAW, GMAW (includes all transfer modes), SMAW, FCAW, and SAW have ... -
AWS B2.1-8-023
Abstract: Foreword This foreword is not part of this standard but is included for informational purposes only. The American Welding Society and the Welding Research Council have joined in a cooperative effort to generate standard ... -
AWS A5.11/A5.11M
Abstract: This specification prescribes requirements for the classification of nickel and nickel-alloy covered electrodes for shielded metal arc welding. It includes those compositions in which the nickel content generally exceeds ... -
AWS F3.2
Abstract: This guide describes recommended principles of ventilation to be used in facilities where welding and allied processes are performed. The primary objective of this document is to enhance the health and safety of all those ... -
AWS NAVSEA B2.1-1-301
Abstract: Abstract This standard contains the essential welding variables for carbon steel in the thickness range of 1/8 inch [3 mm] through 1-1/2 inch [38 mm], using manual gas tungsten arc welding. It cites the base metals and ... -
AWS D17.1/D17.1M
Abstract: This specification contains requirements for fusion welding and non-destructive examination (NDE) of aerospace flight hardware as well as for the welding and NDE of non-flight hardware. When this specification is stipulated ... -
AWS D16.3M/D16.3
Abstract: The purpose of D16.3M/D16.3:2017, Risk Assessment Guide for Robotic Arc Welding, is to identify hazards associated with robotic arc welding. This will help protect personnel. It is not intended to be a guideline for other ... -
AWS C4.3/C4.3M
Abstract: This manual describes the equipment, procedures, and safe practices for oxyfuel gas heating torch operation. It is written for the operators of torches using single or multiple heating tips and heads. It is also recommended ... -
AWS C3.12M/C3.12
Abstract: This specification presents the minimum fabrication and quality requirements for the furnace soldering of materials that include elemental metals, metal alloys, and ceramic base materials that are in geometries that suit ... -
AWS B2.1-1-026
Abstract: Foreword This foreword is not part of this standard but is included for informational purposes only. The American Welding Society and the Welding Research Council have joined in a cooperative effort to generate standard ... -
AWS NAVSEA B2.1-8-319
Abstract: The data to support this Standard Welding Procedure Specification for Naval Applications (SWPS-N) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the ... -
AWS NAVSEA B2.1-8-309
Abstract: The data to support this Standard Welding Procedure Specification for Naval Applications (SWPS-N) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the ... -
AWS B2.1-1-317
Abstract: This standard contains the essential welding variables for carbon steel in the thickness range of 1/8 inch [3 mm] through 1-1/2 inch [38 mm], using semiautomatic gas shielded flux cored arc welding. It cites the base metals ... -
AWS B2.1-1-022
Abstract: Foreword This foreword is not part of this standard but is included for informational purposes only. The American Welding Society and the Welding Research Council have joined in a cooperative effort to generate standard ... -
AWS D1.6/D1.6M
Abstract: This code contains welding requirements for the fabrication, assembly, and erection of welded structures and weldments subject to design stress where at least one of the materials being joined is stainless steel. The code ...