Now showing items 201-220 of 451

    • AWS QC5 

      Type: standard
      Source: AWS - American Welding Society:;1991
      Organization : AWS - American Welding Society
      Abstract: This standard establishes the requirements for the AWS certification of Welding Educators, describes how personnel are qualified, and outlines the principles of conduct and practice by which certification may be maintained.  ...
    • AWS TSM 

      Type: standard
      Source: AWS - American Welding Society:;1996
      Organization : AWS - American Welding Society
      Abstract: INTRODUCTION
      This themal spray manual is intended to be a working manual for its user. The user is expected to add and remove infomation as appropriate based on the users needs. This document provides ...
    • AWS A5.21/A5.21M 

      Type: standard
      Source: AWS - American Welding Society:;2011
      Organization : AWS - American Welding Society
      Abstract: This specification prescribes the requirements for the classification of bare electrodes and rods for surfacing. The specification does not provide for classification of electrode-flux combinations for submerged arc welding. ...
    • AWS JWE 

      Type: standard
      Source: AWS - American Welding Society:;1997
      Organization : AWS - American Welding Society
      Abstract: Preface
      This edition represents a major revision of this encyclopedia, changing its orientation to the authoritative information base of the American Welding Society, and providing access to its ...
    • AWS B2.1-1-007 

      Type: standard
      Source: AWS - American Welding Society:;2013
      Organization : AWS - American Welding Society
    • AWS D1.1 CCRM 

      Type: standard
      Source: AWS - American Welding Society:;2010
      Organization : AWS - American Welding Society
      Abstract: INTRODUCTION
      The first iteration of the D1.1 code, The Code for Fusion Welding and Gas Cutting in Building Construction, was published by the American Welding Society in 1928. Since that time, ...
    • AWS EWH-13 

      Type: standard
      Source: AWS - American Welding Society:;2007
      Organization : AWS - American Welding Society
      Abstract: This literature review, with 176 citations, was prepared under contract to the American Welding Society for its Safety and Health Committee. The review deals with studies of the health effects of fumes, gases, radiation, ...
    • AWS EG4.0 

      Type: standard
      Source: AWS - American Welding Society:;1996
      Organization : AWS - American Welding Society
      Abstract: This guide establishes a minimum skill standard defining training and qualification requirements that are necessary for Participating Organizations to develop and administer a Level III - Expert Welder Program in accordance ...
    • AWS C3.3 

      Type: standard
      Source: AWS - American Welding Society:;2008
      Organization : AWS - American Welding Society
      Abstract: These recommended practices encompass those procedures that should be followed in the design, manufacture, and inspection of brazed joints for critical components in order to assure their reliability in service.
      The ...
      Subject(s) : acceptance criteria , brazed joints , brazing of critical components , design of brazements , inspection of brazements , nondestructive examination of brazed joints , quality control ,
    • AWS D1.1/D1.1M 

      Type: standard
      Source: AWS - American Welding Society:;2010
      Organization : AWS - American Welding Society
      Abstract: This code contains the requirements for fabricating and erecting welded steel structures. When this code is stipulated in contract documents, conformance with all provisions of the code shall be required, except for those ...
    • AWS D10.7M/D10.7 

      Type: standard
      Source: AWS - American Welding Society:;2008
      Organization : AWS - American Welding Society
      Abstract: This standard provides a summary of recommended industrial practices for welding piping1 fabricated from aluminum alloys. Joint design, welding current, and shielding gas tables are included. This standard makes ...
      Subject(s) : Aluminum pipe , gas metal arc welding , gas tungsten arc welding , recommended practice ,
    • AWS D1.8/D1.8M 

      Type: standard
      Source: AWS - American Welding Society:;2009
      Organization : AWS - American Welding Society
      Abstract: Applicability
      The provisions of this code supplement the provisions of AWS D1.1/D1.1M, Structural Welding CodeSteel, and shall apply to the design, fabrication, quality control, ...
    • AWS F1.1M 

      Type: standard
      Source: AWS - American Welding Society:;2006
      Organization : AWS - American Welding Society
      Abstract: This standard prescribes a procedure for sampling fumes generated by welding and allied processes. Because it is limited to health hazard evaluation, the standard is primarily concerned with sampling at the worker's breathing ...
    • AWS PHB-2 

      Type: standard
      Source: AWS - American Welding Society:;2000
      Organization : AWS - American Welding Society
    • AWS G1.2M/G1.2 

      Type: standard
      Source: AWS - American Welding Society:;2010
      Organization : AWS - American Welding Society
      Abstract: This specification outlines the requirements for a standard ultrasonic welding test sample for thermoplastics and its welding and testing.
      As used in this specification, the word shall denotes ...
    • AWS D10.12M/D10.12 

      Type: standard
      Source: AWS - American Welding Society:;2000
      Organization : AWS - American Welding Society
      Abstract: This guide is intended to cover such piping systems as low pressure heating, air-conditioning, refrigeration, and water supply, as well as some gas and chemical systems. These procedures include detailed welding process ...
      Subject(s) : flux cored arc welding , gas metal arc welding , gas tungsten arc welding , Mild steel pipe , oxyacetylene welding , shielded metal arc welding , tubing ,
    • AWS EG2.0 

      Type: standard
      Source: AWS - American Welding Society:;2008
      Organization : AWS - American Welding Society
      Abstract: This guide establishes a minimum skill standard defining training and qualification requirements that are necessary for participating organizations to develop and administer an Entry Level Welder Program in accordance with ...
    • AWS B2.1-5A-224 

      Type: standard
      Source: AWS - American Welding Society:;2009
      Organization : AWS - American Welding Society
      Abstract: The data to support this Standard Welding Procedure Specification (SWPS) were derived from the above-listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding Research ...
    • AWS A5.18/A5.18M 

      Type: standard
      Source: AWS - American Welding Society:;2005
      Organization : AWS - American Welding Society
      Abstract: This specification prescribes requirements for the classification of carbon steel electrodes (solid, composite stranded, and composite metal cored) and rods (solid) for gas metal arc (GMAW), gas tungsten arc (GTAW), and ...
      Subject(s) : Carbon steel welding electrodes , carbon steel welding rods , gas metal arc welding , gas tungsten arc welding , metal cored electrodes , plasma arc welding , stranded electrodes ,
    • AWS A5.13/A5.13M 

      Type: standard
      Source: AWS - American Welding Society:;2010
      Organization : AWS - American Welding Society
      Abstract: This specification prescribes requirements for the classification of surfacing electrodes for shielded metal arc welding. Solid bare electrodes and rods for surfacing are classified in AWS A5.21:2001, Specification for ...