Now showing items 181-200 of 451

    • AWS QC11 

      Type: standard
      Source: AWS - American Welding Society:;1996
      Organization : AWS - American Welding Society
      Abstract: This standard establishes the minimum requirements for an organization to participate with the American Welding Society (AWS) in the qualification and certification of advanced welders.
      This standard specifies ...
      Subject(s) : acceptance criteria , advanced level welder , National Registry , participating organization , performance tests ,
    • AWS EWH-8 

      Type: standard
      Source: AWS - American Welding Society:;1994
      Organization : AWS - American Welding Society
    • AWS B2.4 

      Type: standard
      Source: AWS - American Welding Society:;2012
      Organization : AWS - American Welding Society
      Abstract: This standard provides requirements for qualification for welding thermoplastic materials. It addresses requirements for procedure and performance qualifications. This standard is intended for use where referenced by product ...
    • AWS A5.29/A5.29M 

      Type: standard
      Source: AWS - American Welding Society:;2010
      Organization : AWS - American Welding Society
      Abstract: This specification prescribes requirements for the classification of low-alloy steel electrodes for flux cored arc welding (FCAW) either with or without shielding gas. Iron is the only element whose content exceeds 10.5 ...
    • AWS C5.6 

      Type: standard
      Source: AWS - American Welding Society:;2004
      Organization : AWS - American Welding Society
      Abstract: It is intended in this publication to present the basic concepts of the gas metal arc welding (GMAW) process that will enable the reader to obtain a fundamental understanding of the process and its variations.1 ...
      Subject(s) : arc spot welding , gas metal arc welding , joint design , safety , training ,
    • AWS PHB-7 

      Type: standard
      Source: AWS - American Welding Society:;1998
      Organization : AWS - American Welding Society
    • AWS A4.5M/A4.5 

      Type: standard
      Source: AWS - American Welding Society:;2012
      Organization : AWS - American Welding Society
      Abstract: This standard specifies the preparation and assessment of fillet weld test pieces for conformity assessment of positional usability and root penetration requirements for consumables classification standards for welding ...
    • AWS B2.1-8-212 

      Type: standard
      Source: AWS - American Welding Society:;2001
      Organization : AWS - American Welding Society
      Abstract: The data to support this Standard Welding Procedure Specification (SWPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ...
    • AWS D1.2/D1.2M 

      Type: standard
      Source: AWS - American Welding Society:;2014
      Organization : AWS - American Welding Society
      Abstract: This code covers the welding requirements for any type structure made from aluminum structural alloys, except for aluminum pressure vessels and pressure piping. Clauses 1 through 8 constitute a body of rules for the ...
    • AWS WHB-2.9 

      Type: standard
      Source: AWS - American Welding Society:;2004
      Organization : AWS - American Welding Society
      Abstract: PREFACE
      Welding Processes, Part 1 is the second of the five volumes of the 9th edition of the Welding Handbook. The fifteen chapters of this volume provide updated information on the ...
    • AWS D1.3/D1.3M 

      Type: standard
      Source: AWS - American Welding Society:;2008
      Organization : AWS - American Welding Society
      Abstract: This code contains the requirements for arc welding of structural sheet/strip steels, including cold formed members, hereafter collectively referred to as "sheet steel," which are equal to or less than 3/16 in (0.188 ...
    • AWS C2.18 

      Type: standard
      Source: AWS - American Welding Society:;2001
      Organization : AWS - American Welding Society
      Abstract: This guide covers the application of thermal spray coatings (TSC) for the protection of steel with aluminum, zinc and their alloys, mixtures, and composites. This scope of this guide includes the major elements of an ...
    • AWS D17.1/D17.1M SPANISH 

      Type: standard
      Source: AWS - American Welding Society:;2010
      Organization : AWS - American Welding Society
    • AWS QC14 

      Type: standard
      Source: AWS - American Welding Society:;2009
      Organization : AWS - American Welding Society
      Abstract: This specification establishes the requirements for certification and maintenance of certification in accordance with qualification requirements stated in AWS B5.14, Specification for the Qualification of Welding Sales ...
    • AWS B2.1-1/8-014 

      Type: standard
      Source: AWS - American Welding Society:;2013
      Organization : AWS - American Welding Society
    • AWS D14.4/D14.4M 

      Type: standard
      Source: AWS - American Welding Society:;2012
      Organization : AWS - American Welding Society
      Abstract: General
      This specification sets forth requirements dealing with the allowable stresses, welded joint design, workmanship, procedure and performance qualification, inspection, repair and post weld ...
    • AWS D10.6/D10.6M 

      Type: standard
      Source: AWS - American Welding Society:;2000
      Organization : AWS - American Welding Society
      Abstract: This document summarizes information on the welding of titanium pipe.1 The information has been collected from the welding literature and from various company shops and laboratories. The document is intended to ...
      Subject(s) : arc welding , filler metals , gas shielding weld quality tests , gas tungsten arc welding , joint design , preheat and postweld heat treatment , preweld cleaning , recommended practice , titanium pipe ,
    • AWS PAPQV 

      Type: standard
      Source: AWS - American Welding Society:;2005
      Organization : AWS - American Welding Society
      Abstract: Introduction
      This Professional\'s Advisor is intended to provide insight and guidance to the welding professional in the preparation of welding procedure specifications and procedure qualification ...
    • AWS WI 

      Type: standard
      Source: AWS - American Welding Society:;2000
      Organization : AWS - American Welding Society
      Abstract: The scope of this handbook includes testing and examination methods that apply to a majority of metallic and nonmetallic weldments used in construction. The extent of inspections should be clearly defined in contract ...
    • AWS D8.8M 

      Type: standard
      Source: AWS - American Welding Society:;2007
      Organization : AWS - American Welding Society
      Abstract: The purpose of this specification is to provide the general minimum quality requirements necessary for automotive frames, light truck frames and components arc welding.
      Subject(s) : arc welding , Automotive structures , frame weld quality , light trucks , passenger cars ,