درباره ما
AWS - American Welding Society: Recent submissions
Now showing items 241-260 of 451
-
AWS WM 1.4
Abstract: Preface
Readers of Welding Metallurgy in their comments about previous Volumes 1 and 2 of the Third Edition have offered helpful suggestions toward betterment of future editions. All offerings from ... -
AWS D10.10/D10.10M
Abstract: These recommended practices describe several methods of applying controlled heat to weld joints and a limited volume of base metal adjacent to the joints, as opposed to heating the complete weldment in a furnace or oven. ...Subject(s) : controls , heating methods , insulation , Local heating , piping and tubing , thermocouples , welds , -
AWS D1.4/D1.4M
Abstract: The code shall apply to the welding of the following:
1. Reinforcing steel to reinforcing steel, and
2. Reinforcing steel to carbon or low-alloy structural steel.
When the code is stipulated in contract documents, ... -
AWS QC7 SUPP C
Abstract: Program.
The rules for the American Welding Society (AWS) Certified Welder Program and the requirements for maintenance of certification are provided in this standard. This standard requires the use of ...Subject(s) : AWS certified welders , welder certification , welder qualification , welders , -
AWS B2.2/B2.2M
Abstract: This specification provides the requirements for qualification of Brazing Procedure Specifications (BPSs). This specification also provides requirements for the performance qualification of brazers and ... -
AWS A1.1
Abstract: This metric practice guide is based on the International System of Units (SI) as defined in the U.S. Federal Register notice of July 28, 1998, “Metric System of Measurement: Interpretation of the International ...Subject(s) : conversions , Metric practice , preferred numbers , round-off rules , SI units , -
AWS C7.4/C7.4M
Abstract: This specification addresses processing and quality control requirements for electron beam welding. Processing includes both high- and low-voltage welding equipment and high and medium vacuum variations.
Mater ... -
AWS C6.2/C6.2M
Abstract: This document specifies the requirements for the manufacture and quality assurance of friction weldments. It also contains requirements for the qualification of welding machines, welding procedures, and welding operators. ... -
AWS A5.19
Abstract: This specification prescribes requirements for the classification of bare magnesium alloy welding alectrodes and rods for use with the gas metal arc, gas tungsten arc, oxyfuel gas, and plasma arc welding processes.Subject(s) : Bare magnesium alloy , filler metal , gas metal arc welding , gas tungsten arc welding , magnesium electrodes , magnesium rods , oxyfuel gas welding , plasma arc welding , -
AWS PRGWA
Abstract: Introduction
The use of aluminum as a structural material is a fairly recent development. Originally, aluminum was considered to be a precious metal. In fact, when the Washington Monument was completed ... -
AWS A5.28/A5.28M
Abstract: This specification prescribes requirements for the classification of low-alloy steel electrodes (solid, composite stranded and composite metal cored) and rods (solid) for gas metal arc (GMAW), gas tungsten arc (GTAW), and ...Subject(s) : solid electrodes , -
AWS F1.5M
Abstract: This publication includes the recommended procedures for sampling and methods of analysis for gases that may be formed during the use of various welding and allied processes. These gases include the following:
(1) Ozone ... -
AWS A5.02/A5.02M
Abstract: This document, together with an AWS filler metal specification, is intended to describe a uniform method for providing those specific details needed for filler metal procurement which consist of the following:
(1) The ... -
AWS AWS FUMES AND GASES
Abstract: Abstract
The environment surrounding many welding processes contains fumes (particulate matter) that may be harmful (toxic) or relatively hanniess and gases that may have pulmonary or ... -
AWS D18.3/D18.3M
Abstract: This specification covers the requirements for welding of carbon steels, stainless steels, and nickel alloys in sheet, plate, bar, and other forms for the fabrication and construction of new tanks, vessels, and other ...Subject(s) : food processing equipment , qualification , sanitary application , stainless steel , Visual examination acceptance criteria , -
AWS WHB-3.9
Abstract: PREFACE
This is Volume 3 of the Welding Handbook, the third of the five-volume series in the Ninth Edition. Following the publication of Welding Handbook Volume 1, Welding Science and Technology, ...