درباره ما
AWS - American Welding Society: Recent submissions
Now showing items 261-280 of 451
-
AWS F4.1
Abstract: Explosions, fires, and health hazards may result if welding, cutting, or other hot work is performed on containers that are not free of hazardous substances, such as combustible, reactive, or toxic solids, liquids, vapors, ... -
AWS A5.25/A5.25M
Abstract: This specification prescribes requirements for the classification of electrodes (both solid and composite metal cored) and fluxes for electroslag welding of carbon and low-alloy steels.Subject(s) : arc welding electrodes , carbon steel electrodes , electroslag welding , Filler metal specifications , low-alloy steel electrodes , metal cored electrodes , -
AWS B2.1-22-015
Abstract: The data to support this Standard Welding Procedure Specification (SWPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ... -
AWS B5.2
Abstract: This specification establishes the minimum requirements for the qualification of the Welding Inspector Specialist and Welding Inspector Assistant. The employer is responsible for the testing, examination ...Subject(s) : Inspection , qualification , training , weld , Welding Inspector Assistants , Welding Inspector Specialists , -
AWS B2.1-8-213
Abstract: The data to support this Standard Welding Procedure Specification (SWPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ... -
AWS QC19
Abstract: This standard establishes the requirements for AWS certification of automated process operators and technicians. It describes how personnel are certified, and the principles of conduct and practice by which certification ... -
AWS G2.1M/G2.1
Abstract: This guide presents a description of wrought nickel-based alloys and the processes and procedures that can be used to join these materials. It stresses the process basics, parameters, applications, and safety considerations. ... -
AWS C7.2M
Abstract: These recommended practices present a description of laser beam equipment and procedures that can be used for welding, cutting, drilling, and transformation hardening of various materials. These recommended practices stress ... -
AWS SHB
Abstract: Preface
The perception of soldering as a mature technology has been replaced over the past several years with an increased appreciation for the science and engineering principles that underlie the ... -
AWS B2.1-1-209
Abstract: The data to support this Standard Welding Procedure Specification (WPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ... -
AWS D18.2
Abstract: This standard provides a visual comparison guide that can be used to specify surface discoloration (heat-tint) criteria for sanitary (hygienic) welds in austenitic stainless steel tube.Subject(s) : Austenitic stainless steel , backing gas purity , discoloration , heat tint , tube welds , -
AWS A5.16/A5.16M
Abstract: This standard specifies requirements for the classification of solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium-alloys. The classification of the solid wires and cut lengths and spools ... -
AWS B5.9
Abstract: This standard establishes requirements for the qualification of Welding Supervisors. It describes how personnel are qualified, the principles of conduct, and the practice by which qualification may be maintained.
This ... -
AWS B2.1-5A-223
Abstract: The data to support this Standard Welding Procedure Specification (SWPS) were derived from the above-listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding Research ... -
AWS D14.8M
Abstract: Scope:
This specification applies to the welding of all principal structural weldments and all primary welds used in the manufacture of cranes for industrial, mill, power house, ...Subject(s) : Cranes , industrial cranes , lifting devices , material handling equipment , mill cranes , -
AWS G1.10M
Abstract: Scope, Purpose, and Range of Application
These guidelines list and describe defects in welded joints in thermoplastic materials. The objective is to make possible a generally valid evaluation giving ...Subject(s) : evaluation , heated tool butt welding , hot gas extrusion , hot gas welding , joints , testing , thermoplastics , -
AWS GWF
Abstract: This manual defines the physical requirements of a welding instruction facility. It is intended to give guidance to institutions that desire to build or convert facilities to train welders to produce welds using the manual ... -
AWS B2.1-1-018
Abstract: The data to support this Standard Welding Procedure Specification (WPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ...Subject(s) : allowable joint designs , base metal , carbon steel , filler metal , self-shielded flux cored arc welding , semiautomatic , Welding Procedure Specification , -
AWS CAWF
Abstract: Introduction
During the process of welding, metal vapors are produced in the electric arc. As these vapors cool and solidify, a fume is formed that may be a potential health hazard to the welder and to ...