درباره ما
AWS - American Welding Society: Recent submissions
Now showing items 61-80 of 451
-
AWS NAVSEA B2.1-1-304
Abstract: The data to support this Standard Welding Procedure Specification for Naval Applications (SWPS-N) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the ... -
AWS B2.1-1-019
Abstract: Foreword This foreword is not part of this standard but is included for informational purposes only. The American Welding Society and the Welding Research Council have joined in a cooperative effort to generate standard ... -
AWS D1.3/D1.3M
Abstract: This code contains the requirements for arc welding of structural sheet/strip steels, including cold formed members, hereafter collectively referred to as “sheet steel,” which are equal to or less than 3/16 in ... -
AWS A5.9/A5.9M
Abstract: This specification prescribes requirements for the classification of bare stainless steel wire electrodes (including stranded wire in which all wires in the strand are from one heat), strip electrodes, wires, and rods for ... -
AWS D1.4/D1.4M
Abstract: This code shall apply to the welding of the following: (1) Steel reinforcing bar to steel reinforcing bar, and (2) Steel reinforcing bar to carbon or low-alloy structural steel. When this code is stipulated in contract ... -
AWS A5.10/A5.10M
Abstract: This standard specifies requirements for classification of solid wires and rods for fusion welding of aluminum and aluminum alloys. The classification of the solid wires and rods is based on their chemical composition. ... -
AWS D8.2M
Abstract: This specification expresses the quality characteristics and metrics pertinent to individual resistance spot welds on automotive aluminum structures. The acceptance criteria are the same for all welds regardless of the ... -
AWS B2.1-1-027
Abstract: The data to support this Standard Welding Procedure Specification (SWPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ... -
AWS C1.4M/C1.4
Abstract: This specification establishes welding equipment requirements and welding procedures used to produce welds of acceptable quality in coated and uncoated carbon and low-alloy steels, including mild steels and high strength ... -
AWS B2.1-1-017
Abstract: Foreword This foreword is not part of this standard but is included for informational purposes only. The American Welding Society and the Welding Research Council have joined in a cooperative effort to generate standard ... -
AWS A5.18/A5.18M
Abstract: This specification prescribes requirements for the classification of carbon steel electrodes (solid, composite stranded, and composite metal cored) and rods (solid) for gas metal arc (GMAW), gas tungsten arc (GTAW), and ... -
-
AWS D8.14M
Abstract: The purpose of this specification is to provide the minimum acceptance criteria for arc welding of various types of automotive parts made of aluminum alloys. -
AWS B2.3/B2.3M
Abstract: Abstract This specification provides the requirements for qualification of soldering procedure specifications, solderers, and soldering operators for manual, mechanized, and automatic soldering. The soldering processes ... -
AWS C2.16/C2.16M
Abstract: This guide contains recommendations for establishing, conducting, and maintaining a thermal spray operator qualification program. Such programs generally include training, knowledge and skill testing, and documentation ... -
AWS C4.2/C4.2M
Abstract: This standard describes the equipment, procedures, and safe practices for the oxyfuel cutting of steel. It is for the operators of both hand and machine torches and is recommended for management personnel associated with ... -
-
-
AWS B2.1-1-016
Abstract: Foreword This foreword is not part of this standard but is included for informational purposes only. The American Welding Society and the Welding Research Council have joined in a cooperative effort to generate standard ... -
AWS F1.1M
Abstract: This standard describes procedures for sampling fumes and gases generated by welding and allied processes. Because it is limited to health hazard evaluation, the standard is primarily concerned with sampling at the ...