درباره ما
ANSI - American National Standards Institute: Recent submissions
Now showing items 41-60 of 1236
-
ANSI INCITS 139
Abstract: Scope and Purpose This standard specifies the Media Access Control (MAC), the lower sublayer of the Data Link Layer (DLL), for the Fiber Distributed Data interface (FDDI). The FDDI provides a high-bandwidth (100 megabits ... -
ANSI INCITS 152
Abstract: This standard provides the following specifications for adding machine paper rolls: terminology; roll widths; roll length; paper substance and quality, thickness, finish, color, brightness, opacity, tearing and bursting ... -
ANSI INCITS 112
Abstract: This standard provides the mechanical, physical, and magnetic properties of a magnetic disk with a 14-inch (356-mm) diameter and low surface friction intended for mounting in data storage devices operating at 160 000 flux ... -
ANSI INCITS 432
Abstract: This standard describes a set of functions and data structures in the C language abstracting the details of the FAIS_Platform from the implementation of a storage management application. This standard defines an API only ... -
ANSI INCITS 165
Abstract: This standard is designed to promote the interchangeability of DIBOL programs among a variety of computers. Programs conforming to this standard will be said to be written in DIBOL. Purpose The purpose of the standard is ... -
ANSI INCITS 413
Abstract: Introduction The RapidIO™ architecture was developed to address the need for a high-performance low pin count packet-switched system level interconnect to be used in a variety of applications as an open standard. The ... -
ANSI INCITS 62
Abstract: This standard contains basic definitions, measurement requirements, specifications, and recommendations for papers used with optical character recognition readers. Two types of parameters of paper for OCR media are covered. ... -
ANSI INCITS 136
Abstract: This American National Standard is intended to provide a format and recording standard for an 8000-bpi (315-bpmm) streaming 0.250-inch (6 3-mm)-wide, 4- and 9-track, magnetic tape in a cartridge to be used for information ... -
ANSI INCITS 256
Abstract: Purpose This document provides a technical standard for 433 MHz RFID and 2.45 GHz devices, specifically, devices operating in freely available international frequency bands at license-free power levels. Its purposes are ... -
ANSI INCITS 430
Abstract: This standard defines a set of SCSI command descriptor blocks that are useful in accessing and controlling devices with a peripheral device type set to 5. This command set is transport independent and may be implemented ... -
ANSI INCITS 45
Abstract: This standard prescribes shapes and sizes of handprinted characters to be used in Optical Character Recognition (OCR) systems and shapes of handprinted characters for man-to-man communication. The standard encompasses ... -
ANSI INCITS 58
Abstract: This standard specifies the general, physical, and magnetic requirements for the physical interchange of magnetic eleven-disk packs for use in electronic data processing systems. -
ANSI INCITS 163
Abstract: This standardp rovidest he mechanical,p hysical, and magnetic properties of a low-friction disk with a diameter of 130 mm (5.118 inches) and with a typical recording density of 38 tracks per millimeter (tpmm) (960 tracks ... -
ANSI INCITS 111
Abstract: This standard describes the matrix of dot placement and size limits for OCR-MA alphanumeric characters and symbols for optical character recognition (OCR) systems. Purpose. The purpose of this standard is to establish a ... -
ANSI INCITS 411
Abstract: This API provides interfaces to discover and manage iSCSI resources on a system. The intended audience is vendors that deliver drivers that provide these resources to a system. -
ANSI INCITS 204
Abstract: This standard provides the requirements for a standard for a streaming 0.250 inch (6.30 mm) wide, fifteen and eighteen track, magnetic tape in a cartridge to be used for information interchange between information processing ... -
ANSI INCITS 56
Abstract: This American National Standard is intended to provide a format and recording standard for a 0.250~inch (6.30-mm) -wide, 4-track, magnetic tape in a cartridge to be used for information interchange between information ... -
ANSI INCITS 374 AMD 1
Abstract: This amendment to ANSI INCITS 374:2003, Information Technology - Fibre Channel - Single-Byte Command Set-3 (FC-SB-3), describes persistent IU pacing, a method for allowing an FC-SB-3 channel to retain a pacing count that ... -
ANSI INCITS 127
Abstract: This American National Standard for an unrecorded cartridge containing 0.250-inch (6.30-mm)-wide magnetic tape presents the minimum requirements for the mechanical and magnetic interchangeability of the cartridge between ... -
ANSI INCITS 96
Abstract: This standard specifies sizes for single-part continuous business forms for use in handwritten or machine applications, or both. Such forms are continuous lengths of forms that have sprocket feed holes in both the left and ...