درباره ما
MIL-I-3374A
INSULATION CLOTH AND TAPE, ELECTRICAL, VARNISHED CAMBRIC
Organization:
NAVY - SH - Naval Sea Systems Command (Ship Systems)
Year: 1955
Abstract: This specification covers insurance intended for use as cable insulation, coil wrappers, and for insulating bus bars, joints and terminals of electric wires and cables winding insulation and other electrical apparatus connection.
Insulation shall be of the following types and classes, as specified (see 6.2):
Intended Use: Type I, class 2 and Type II, class 1 insulation, covered by this specification, are intended for repair and maintenance. Type I, class 1 and Type II, class 2 insulations are intended to be utilized by contractors as a component of their finished products, and should not be ordered as a stock item.
Insulation shall be of the following types and classes, as specified (see 6.2):
Type I-Cloth Class 1-Bias cut Class 2-Straight cut Type II-Tape Class 1-Bias cut Class 2-Straight cut
Intended Use: Type I, class 2 and Type II, class 1 insulation, covered by this specification, are intended for repair and maintenance. Type I, class 1 and Type II, class 2 insulations are intended to be utilized by contractors as a component of their finished products, and should not be ordered as a stock item.
Collections
:
Show full item record
| contributor author | NAVY - SH - Naval Sea Systems Command (Ship Systems) | |
| date accessioned | 2017-09-04T15:16:19Z | |
| date available | 2017-09-04T15:16:19Z | |
| date copyright | 07/25/1955 | |
| date issued | 1955 | |
| identifier other | MJGIDAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/15544 | |
| description abstract | This specification covers insurance intended for use as cable insulation, coil wrappers, and for insulating bus bars, joints and terminals of electric wires and cables winding insulation and other electrical apparatus connection. Insulation shall be of the following types and classes, as specified (see 6.2): Type I-Cloth Class 1-Bias cut Class 2-Straight cut Type II-Tape Class 1-Bias cut Class 2-Straight cut Intended Use: Type I, class 2 and Type II, class 1 insulation, covered by this specification, are intended for repair and maintenance. Type I, class 1 and Type II, class 2 insulations are intended to be utilized by contractors as a component of their finished products, and should not be ordered as a stock item. | |
| language | English | |
| title | MIL-I-3374A | num |
| title | INSULATION CLOTH AND TAPE, ELECTRICAL, VARNISHED CAMBRIC | en |
| type | standard | |
| page | 8 | |
| status | Active | |
| tree | NAVY - SH - Naval Sea Systems Command (Ship Systems):;1955 | |
| contenttype | fulltext |