درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 1061-1080 of 39933
-
Standard Specification for Tenderness Marketing Claims Associated with Meat Cuts Derived from Beef
Abstract: This specification covers requirements for incorporating a tenderness marketing claim to finished labelling, advertisements, or promotions, or a combination thereof, associated with beef cuts to distinguish product value ... -
Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers
Abstract: This specification covers requirements, test methods, materials, and marking for polyethylene (PE), open bottom, buried arch-shaped chambers of corrugated wall construction used for collection, detention, and retention of ... -
Standard Specification for Palladium-Copper Electrical Contact Material
Abstract: This specification deals with the standard requirements for palladium-copper alloy in the form of rod, wire, strip, and sheet material for use in electrical contacts. The specimen shall be produced from raw materials of ... -
Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.2 [3871 mm2] in Panels
Abstract: This specification covers welded wire mesh fence fabric produced from steel wire or metallic-coated steel wire. The metallic-coated fabric may be polymer coated after fabrication. This specification identifies the three ... -
Standard Specification for Glazing and Glazing Systems Subject to Airblast Loadings
Abstract: This specification covers exterior windows, glazing panels, glazed curtain walls, and other glazed protective systems used in buildings that may be subjected to intentional and accidental explosions. The specification is ... -
Standard Guide for Characterization of Hydrogels Used in Regenerative Medicine
Abstract: 4.1 This guide describes methods for determining the key attributes of hydrogels used in regenerative medicine (that is, their biological properties, kinetics of formation, degradation and agent release, physical and ... -
Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi and 1170 MPa Minimum Tensile Strength (Inch and Metric)
Abstract: This specification covers the requirements for quenched and tempered alloy steel screws 0.060 through 1 1/2 inches in diameter having a minimum ultimate tensile strength of 170 KSI. High strength screws shall be heat treated ... -
Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire
Abstract: This specification contains the general requirements for the 245/7OR19.5 136/134M radial truck standard reference test. Provided in this specification is a 19.5 rim diameter code standard truck design and construction, ... -
Standard Practice for Compliance Audits to ASTM Standards on Light Sport Aircraft
Abstract: 3.1 The purpose of this standard practice is to provide the minimum requirements for the conduct of compliance audits. 3.2 The intended use of standard is to provide a basis for an internal or external entity to develop ... -
Standard Practice for Accelerated Laboratory Aging of Radial Passenger Car and Light Truck Tires through Load Range E for the Laboratory Generation of Belt Separation
Abstract: 5.1 This standard practice establishes a method for conducting accelerated laboratory aging of radial passenger or light truck tires, or both, in an oven. 5.2 The goal of this practice is to define a scientifically valid ... -
Standard Practice for Maintenance of Aircraft Electrical Wiring Systems
Abstract: 4.1 This practice is intended to be used as a standard wiring practice for aircraft when not contrary to standards published by the aircraft original equipment manufacturer (OEM) or regulations. This practice is intended ... -
Standard Specification for Pure Palladium Electrical Contact Material
Abstract: This specification covers palladium in the form of rod, wire, strip, and sheet material for electrical contacts. Raw materials shall be of such quality and purity that the finished product (produced by cold working, ... -
Standard Practice for Static and Dynamic Characterization of Motion Preserving Lumbar Total Facet Prostheses
Abstract: 5.1 Facet Prosthesis Components—The facet replacement may comprise a variety of shapes and configurations. Its forms may include, but are not limited to, ball-and-socket articulating joints, joints having a free-floating ... -
Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers
Abstract: 4.1 This practice provides a rational method for structural design of thermoplastic stormwater chambers. The loads, capacities, and limit states are based on accepted load and resistance factor design for thermoplastic ... -
Standard Practice for Design, Manufacture, Operation, Maintenance, and Inspection of Amusement Rides and Devices, in Canada
Abstract: 4.1 The purpose of this practice is to adopt the ASTM F24 Committee Standards for Amusement Rides and Devices for use in Canada. 4.2 This practice provides guidance for use of additional codes and standards in Canada. ... -
Standard Specification for Air-Fed Protective Ensembles
Abstract: 4.1 As with other hazardous materials protective ensembles, air-fed protective ensembles include clothing and equipment items needed for dermal and respiratory protection, including protective suits, gloves, footwear, and ... -
Standard Guide for European Union's Registration, Evaluation, and Authorization of Chemicals (REACH) Supply Chain Information Exchange
Abstract: 5.1 This guide recommends practices and solutions for global supply chain information exchange for substances, preparations, and articles as identified by REACH. The first five annexes of REACH guidance standards serve as ... -
Standard Practice for Inspection of Aircraft Electrical Wiring Systems
Abstract: 4.1 The term “electrical system” as used in this practice means those parts of the aircraft that generate, distribute, and use electrical energy, including their support and attachments. 4.2 The satisfactory performance ...