درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 1081-1100 of 39933
-
Standard Specification for Ultra-High Molecular Weight Polyethylene Powder Blended with Alpha-Tocopherol (Vitamin E) and Fabricated Forms for Surgical Implant Applications
Abstract: This specification covers ultra-high molecular weight polyethylene (UHMWPE) powder blended with alphatocopherol (vitamin E) intended for use in surgical implants. The requirements apply to alphatocopherol-containing UHMWPE ... -
Standard Guide for Training of a Land Search Team Leader (STL)
Abstract: 4.1 This guide establishes the minimum knowledge, skills, and abilities that a person must have to perform as a Land Search Team Leader. No other skills are included or implied. 4.2 Every person who is identified as a ... -
Standard Test Method for Qualifying Coatings for Use on F3125 Grade A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement
Abstract: 4.1 This test method describes the testing procedure that shall be used to qualify a coating system that is under consideration for use on ASTM F3125 Grade A490 high strength structural bolts made of any steel composition ... -
Standard Specification for Nickel-Iron-Chromium-Molybdenum-Nitrogen Alloy, Nickel-Iron-Chromium-Molybdenum and Iron-Nickel-Chromium-Molybdenum-Copper Welded Pipe
Abstract: This specification covers UNS N08925, UNS 8354, and UNS N08926 welded pipes of specific dimensions for general corrosion applications. The pipe shall be made from flat-rolled alloy by an automatic welding process with no ... -
Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
Abstract: This specification covers normalized and tempered carbon steel, and liquid quenched and tempered alloy steel forgings for pinions, gears, and shafts for reduction gears. Prior to heat treatment for mechanical properties ... -
Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing
Abstract: 5.1 During shipment, storage and installation, PEX tubing may be exposed to UV radiation prior to being shielded from further exposure after installation. The effects of UV exposure on PEX tubing is determined by use of ... -
Standard Test Method for Determining the Molar Mass of Sodium Alginate by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
Abstract: 4.1 The composition and sequential structure of alginate, as well as the molar mass and molar mass distribution, determines the functionality of alginate in an application. For instance, the gelling properties of an alginate ... -
Standard Specification for Fire Safety for Candle Accessories
Abstract: This specification prescribes the performance requirements and corresponding test procedures for candle accessories to help ensure a reasonable degree of personal safety during normal use, thereby, reducing incidences of ... -
Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)
Abstract: This specification covers the chemical, mechanical, and metallurgical requirements for wrought nitrogen strengthened 11manganese-17chromium-3molybdenum (UNS S29225) low-nickel stainless steel alloy bars and wires for ... -
Standard Practice for Kit Assembly Instructions of Aircraft Intended Primarily for Recreation
Abstract: This practice covers the instructions a kit producer must provide to a consumer in order to assemble and safely flight-test a recreational aircraft to ensure compliance with applicable ASTM standards. The instructions ... -
Standard Test Methods for Physical Assault on Ventilation Grilles for Detention and Correctional Facilities
Abstract: 4.1 A major concern for administration officials is security of barriers used in detention/correctional facilities. These test methods are designed to identify the security levels for ventilation grilles mounted within ... -
Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner
Abstract: 4.1 This practice is for use by designers and specifiers, regulatory agencies, owners, and inspection organizations who are involved in the rehabilitation of sewer service laterals and its connection to the main through ... -
Standard Guide for In-Situ Burning of Oil in Ships or Other Vessels
Abstract: 4.1 This guide is primarily intended to aid decision-makers and spill-responders in contingency planning, spill response, and training. 4.2 This guide is general and site conditions can change the situation considerably. -
Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors
Abstract: 5.1 The pressure drop results can be added to the pressure drops of other components in an exhaust system to determine the total exhaust fan pressure requirement. 5.2 The particulate capture efficiency can be used with ... -
Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
Abstract: This specification covers seamless and welded zirconium and zirconium alloy pipe. The pipe is furnished in three grades as follows; grade R60702- unalloyed zirconium, grade R60704- zirconium-tin alloy, and grade R60705- ... -
Standard Guide for Determining Safety Factors for Technical Rescue Systems and Equipment
Abstract: 3.1 This guide may be used to provide a consistent method for determining load ratios for technical rescue equipment and systems. 3.2 Use of this guide will help to maintain clearer, more consistent calculation and reporting ... -
Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.2 [3871 mm2] or Less, in Panels or Rolls, with Uniform Meshes
Abstract: This specification covers welded wire mesh fence fabric produced from steel wire or metallic-coated steel wire. The metallic-coated fabric may be polymer coated after fabrication. Welded wire mesh fence fabric is classified ... -
Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
Abstract: 5.1 The optical angular deviation of flat transparent parts, such as aircraft windshields, canopies, cabin windows, and visors, can be measured using these methods. Angular deviation in a windscreen or visor can cause ... -
Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
Abstract: This specification covers requirements, test methods, materials, and marking for polypropylene (PP), open bottom, buried chambers of corrugated wall construction used for collection, detention, and retention of stormwater ... -
Standard Practice for Labeling of Recreational Camping Tents and Bivouac Sacks
Abstract: 4.1 These warnings are intended as preventive measures against the most commonly reported hazards of which the subcommittee is aware. 4.2 A permanent warning label shall be affixed to all tents and to all bivouac sacks. ...