درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 1201-1220 of 39933
-
Standard Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines
Abstract: This specification covers detergent feeders, rinse additive feeders, and sanitizing agent feeders intended to automatically maintain the concentration of additives in the wash, recirculated rinse, or non-recirculated rinse ... -
Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)
Abstract: This specification covers the chemical composition and mechanical requirements for 35cobalt-35nickel-20chromium-10molybdenum alloy (UNS R30035) forgings for use in surgical implants. The material covered here shall be in ... -
Standard Specification for Flashlights on Vessels
Abstract: This specification covers three types of flashlights. The three types of flashlights are classified as follows: Type I; Type II; and Type III. All materials used in the construction of these flashlights shall be of a quality ... -
Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
Abstract: This specification covers the requirements, test methods, and materials for 4 to 36-in. diameter poly(vinyl chloride) (PVC) corrugated pipes, joints, and fittings that consist of an outer corrugated wall fused to a smooth ... -
Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
Abstract: 5.1 This practice provides a means of assuring that products supplied during ship construction and maintenance are substantially the same as the materials on which the original selection was based. The selection of a paint ... -
Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
Abstract: This specification deals with the standard requirements for nickel-chromium-iron-molybdenum-copper alloys (UNS N06007, N06975, N06985, and N06030) in the form of plate, sheet, and strip for use in general corrosive services. ... -
Standard Specification for Alloy Steel Socket Set Screws
Abstract: This specification covers the requirements and corresponding test methods for quenched and tempered alloy steel socket set screws (SSS) having sizes of M1.6 through M24, hardnesses of 45 to 53 HRC, and belonging to ISO ... -
Standard Practice for Qualification of Polyethylene Saddle-Fused Joints
Abstract: 3.1 The tests described in this practice are intended to present a method of satisfying the requirements of DOT CFR Title 49, Parts 192.283 and 192.285. 3.2 The sustained pressure test is intended to meet the burst test ... -
Standard Specification for Industrial and Commercial Swing Gates
Abstract: This specification covers detailed requirements for chain link fence gates, gate posts and accessories for both single and double swing-type gates for industrial and commercial application. All gate hardware shall be of ... -
Standard Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity
Abstract: 4.1 This test method is useful for assessing the cytotoxic potential of new materials and formulations and as part of a quality control program for established medical devices and components. 4.2 This test method assumes ... -
Standard Classification of Wall Coverings and Ceiling Coverings by Use Characteristics
Abstract: 4.1 This classification provides criteria by which wall coverings of appropriate use characteristics can be chosen for particular residential and commercial decorating applications. -
Standard Specification for Wildcats, Ship Anchor Chain
Abstract: This specification covers wildcats as used in windlasses to haul in and pay out anchor chain on board ships. Wildcats shall be classified based on materials and manufacture. Wildcats shall be fabricated from structural ... -
Standard Practice for Selecting Biological Test Methods for Materials and Devices
Abstract: 4.1 The objective of this practice is to provide information to consider when selecting and conducting biological testing, when deemed necessary. 4.2 A matrix listing the biological endpoints relevant to a biocompatibility ... -
Standard Practice for Assessment of Hemolytic Properties of Materials
Abstract: 5.1 The presence of hemolytic material in contact with the blood may cause loss of, or damage to, red blood cells and may produce increased levels of free plasma hemoglobin capable of inducing toxic effects or other effects ... -
Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses
Abstract: 4.1 This test method is intended to be performed in conjunction with pin-on-flat wear machines or similar machines that are designed to evaluate simplified specimen geometries. Note 1: See Haider and Baykal (1)3 for useful ... -
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
Abstract: This specification covers polyethylene (PE) pipe made in dimensions based on outside determined range of diameters and larger. The piping is intended for new construction and insertion renewal of old piping systems used ... -
Standard Practice for Testing Materials in Rabbits for Primary Skin Irritation
Abstract: 4.1 Materials that are to be in contact with the skin should not cause irritation to the skin. Since it is probably the substances leached from a material that cause the irritation, this practice provides for direct ... -
Standard Specification for Anodic Oxide Coatings on Aluminum
Abstract: This specification covers the requirements for porous oxide coatings deposited by electrolysis on aluminum and aluminum alloy parts. These coatings should have good appearance, abrasion resistance, electrical properties, ... -
Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035)
Abstract: This specification covers the requirements for wrought cobalt-35nickel-20chromium-10molybdenum alloy for use in the manufacture of surgical implants. The alloy shall be manufactured into plates, sheets, and foils in the ... -
Standard Specification for Residential Chain Link Fence Gates
Abstract: This specification covers the attachment, finish, and dimensional requirements for residential chain link fence gates, including frames, posts, fabric, and hardware and accessories associated with them.