درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 1181-1200 of 39933
-
Standard Specification for Stationary Upright and Recumbent Exercise Bicycles and Upper and Total Body Ergometers
Abstract: This safety specification provides the safety design features and reasonable safety standards intended to reduce the demonstrated hazards associated with the use (including storage, movement, entry, use, and exit from the ... -
Standard Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems (Metric)
Abstract: This specification covers the requirements and testing procedures for five types of electrical insulation monitoring devices intended as permanently installed units that are used in the detection of ohmic insulation faults ... -
Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating
Abstract: 2.1 Molybdenum is used in engineering applications where strength and rigidity of component parts are needed, especially at high temperatures. Its good strength at high temperatures, low vapor pressure, and good impact and ... -
Standard Guide for Documenting the Results of Chemical Permeation Testing of Materials Used in Protective Clothing
Abstract: 3.1 This guide is intended to encourage thorough and consistent documentation of permeation testing and its results. 3.2 Uniform information and performance data increase the likelihood of selecting proper chemical ... -
Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
Abstract: 5.1 With the advent of thick, highly angled aircraft transparencies, multiple imaging has been more frequently cited as an optical problem by pilots. Secondary images (of outside lights), often varying in intensity and ... -
Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
Abstract: 3.1 The purpose of this practice is to provide the minimum manufacturing requirements for amusement rides and devices and to provide the minimum requirements for a written quality assurance program for an amusement ride ... -
Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners
Abstract: This specification covers the basic physical requirements and test methods for phosphate/oil and phosphate/organic corrosion protective coatings for fasteners such as nuts, clips, washers, and other ferrous threaded and ... -
Standard Specification for Wall Coverings and Ceiling Coverings
Abstract: This specification covers the performance, quality, packaging, and marking requirements for flexible wall coverings as a finished product. Also included here are wall preparation and covering installation procedures. The ... -
Standard Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators
Abstract: This specification covers monitoring devices (monitors) for the automatic detection and signaling of low insulation resistance values in idle electrical motors or generators, or both. Monitors are intended for permanent ... -
Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals
Abstract: 3.1 The data generated by this test method shall be used to determine whether low embrittling cadmium plated parts are liable to be corroded or damaged by application of the test material during routine maintenance operations. -
Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605)
Abstract: This specification covers the requirements for the manufacture of wrought cobalt-20chromium-15tungsten-10nickel surgical fixation wire. The starting material, dimensions, and tolerances shall conform to the requirements ... -
Standard Specification for Vinyl Composition Floor Tile
Abstract: This specification covers vinyl composition floor tile with either smooth or embossed surfaces. Vinyl composition tile shall conform to the materials, color, pattern, wearing surface, size, thickness, and squareness indicated ... -
Standard Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer
Abstract: 3.1 This measurement of flow gives results that cannot be predicted with viscosity measurements, due to surface tension and density effects. The measured flow is related to flow performance of viscous materials sprayed on ... -
Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products
Abstract: 5.1 A number of factors such as the condition of the entry and back surfaces of the inspected part, the inclination of the ultrasonic beam with respect to the entry surface, and variations in the performance characteristics ... -
Standard Specification for Stainless Steel Bars and Shapes
Abstract: This specification covers hot-finished or cold-finished bars except bars for reforging. It includes rounds, squares, and hexagons, and hot-rolled or extruded shapes, such as angles, tees, and channels in the more commonly ... -
Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Bar for Surgical Implant Applications (UNS R30003 and UNS R30008)
Abstract: This specification covers the requirements for two grades of wrought 40cobalt-20chromium-16iron-15nickel- 7molybdenum alloy in the form of wire and strip used for the manufacture of surgical implants. The heat analysis ... -
Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
Abstract: 2.1 This practice is applicable to distinguish between properly and improperly extruded PVC plastic pipe. It can be used to: 2.1.1 Reveal incomplete exsiccation of compound before or during extrusion (Note 1), 2.1.2 Determine ... -
Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe
Abstract: 4.1 Full-encirclement-type band clamps are recommended for repairs only where the pipe is able to maintain its structural integrity. These clamps are not recommended for permanent repair of pipe where the damage could ... -
Standard Specification for Dispensers, Powdered Iced Tea
Abstract: This specification covers counter model, self-contained powdered iced tea dispensers. The tea dispensers shall be of two types, each working with a powdered concentrate that is mixed with potable tap water to give a finished ...