درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 2261-2280 of 39933
-
Standard Test Method for Radon in Drinking Water
Abstract: 5.1 The most prevalent of the radon isotopes in ground water is 222Rn. This isotope presents the greatest health risk compared to the other naturally occurring radon isotopes if ingested via the water pathway. -
Standard Guide for Chain-Link Pickleball Court Fences
Abstract: 5.1 The Intended Use of This Guide is to identify the specific functions and qualities desired of a pickleball fence and offer recommendations on how to achieve them with a chain link fence for different types of pickleball ... -
Standard Guide for ASTM F24 Standards Governing Lifecycle Management of Amusement Rides and Devices
Abstract: 4.1 The scope of the Committee F24 is the development of standard methods of testing, performance specifications, definitions, standard methods of maintenance and operations, and best practices for amusement rides and ... -
Standard Guide for Assessing Risks Related to Implementation of Exoskeletons in Task-Specific Environments
Abstract: 4.1 There is evidence to support use of occupational exoskeletons to support work tasks and activities. It is recognized that organizations, job responsibilities, and working contexts vary widely. Additionally, a wide array ... -
Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)
Abstract: 5.1 The raveled strip test in this test method is considered satisfactory for acceptance testing of commercial shipments of woven textile fabrics because the method has been used extensively in the trade for acceptance ... -
Standard Practice for Creation of Walkway Tribometer Interlaboratory Study Reports and Test Procedures
Abstract: 5.1 The test procedures and interlaboratory study report that result from coordinator compliance with this Practice are intended to include all information required for an ASTM Test Method and its associated Research Report; ... -
Standard Practice for Single Component, Fluid-Applied Membrane-Forming Moisture Mitigation Systems for Use Under Resilient Floor Coverings
Abstract: 4.1 Moisture emitting from concrete substrates can detrimentally affect the performance of resilient floor covering systems. Most resilient flooring and adhesive manufacturers publish a maximum acceptable level of moisture ... -
Standard Guide for Ensuring the Safety of Connected Consumer Products
Abstract: 4.1 This guide is intended to apply in conjunction with applicable end-product specific performance or design standard requirements to address the overall system safety of a connected consumer product. Designers and ... -
Standard Guide for Measurement of pH Involving Flooring Installations
Abstract: 4.1 There is typically a higher concentration of soluble alkali salts in the surface region of a concrete slab due to the initial bleeding process of a freshly placed concrete slab. If after a resilient floor covering ... -
Standard Guide for Detection and Quantification of Cleaning Markers (Analytes) for the Validation of Cleaning Methods for Reusable Medical Devices
Abstract: 5.1 This standard guide may be used by medical device manufacturers as part of their design plan and implementation of the validation of the cleaning instructions of their reusable medical devices. 5.2 This guide helps ... -
Standard Test Method for Corrosion of Low-Embrittling Zinc-Nickel Plate by Aircraft Maintenance Chemicals
Abstract: 3.1 The data generated by this test method shall be used to determine whether low embrittling zinc-nickel plated parts are liable to be corroded or damaged by application of the test material during routine maintenance operations. -
Standard Test Method for Wet-to-Dry Hiding Change
Abstract: 5.1 Many architectural paints, particularly white and light tints, change significantly in film opacity as they dry. An increase in hiding is sometimes associated with porosity and poor film integrity with conventionally ...