درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 3081-3100 of 39933
-
Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
Abstract: 4.1 The ability of a paint or coating to resist deterioration of its physical and optical properties caused by exposure to light, heat, and water can be very significant for many applications. This practice is intended to ... -
Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water
Abstract: 5.1 Turbidity is undesirable in drinking water, plant effluent waters, water for food and beverage processing, and for a large number of other water-dependent manufacturing processes. Removal of suspended matter is ... -
Standard Test Method of Analysis for Sodium Toluene Sulfonate in Detergents
Abstract: 4.1 This test method is of use to anyone engaged in compositional analysis of detergent formulations. This would include formulators, and analysts employed by companies that manufacture the components usually included in ... -
Standard Guide for Part-Stream Sampling of Coal
Abstract: 5.1 This guide provides instructions for Condition C sampling by collecting individual increments from part of a cross section of a moving stream of coal, as opposed to collection of individual increments by removal of a ... -
Standard Test Method for Volatile Matter (Moisture) of Wet Blue by Oven Drying
Abstract: 4.1 The result obtained by this test is normally considered to be the moisture content of the wet blue or wet white sample. This result is used to correct all other chemical tests to a moisture-free basis. 4.2 Materials ... -
Standard Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation)
Abstract: 5.1 The procedure described is specific for chromium in Wet Blue. Vanadium is the only common interfering element and is rarely present in quantity. Iron, when present from either water contamination or process chemicals, ... -
Standard Guide for Testing Industrial Protective Coatings
Abstract: 4.1 This guide is intended to provide assistance in selecting appropriate tests for evaluating the general performance level to be expected of a coating or coating system on a given substrate exposed to a given type of ... -
Standard Test Method for Accelerated Soiling of Pile Yarn Floor Covering
Abstract: 5.1 This test method may be used to soil test specimens in the absence of abrasive wear and texture changes under controlled conditions using a standard synthetic soil, or as a preliminary step to other procedures. 5.2 This ... -
Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Fine-Grained Soils
Abstract: 5.1 The shear strength of a specimen depends on the method of shearing, soil type, vertical consolidation stress, time of consolidation, rate of strain, and prior stress history of the soil. 5.2 In this test, the shear ... -
Standard Practice for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement
Abstract: 5.1 Tinting strength is an essential property of printing ink dispersions. Although results on bulk tints do not guarantee equivalency of dry printed films, they provide useful parameters for quality control of production ... -
Standard Test Method for Immunological Measurement of Antigenic Protein in Hevea Natural Rubber (HNR) and its Products
Abstract: 5.1 Type 1 latex allergy most commonly manifests as localized urticaria after contact of skin with natural rubber but can also include symptoms of allergic rhinoconjunctivitis, asthma and rarely anaphylaxis. This immediate ... -
Standard Test Methods of Sampling and Chemical Analysis of Chlorine-Containing Bleaches
Abstract: These test methods detail the standard procedures for the sampling and chemical analysis of chlorine-containing bleaches including sodium hypochlorite (soda bleach) solutions, calcium hypochlorite, and chloroisocyanuric ... -
Standard Test Method for Enterococci in Water Using Enterolert
Abstract: 5.1 This test provides an easy and reliable method for the detection of enterococci in water within 24 h. For recreational water (fresh and marine) testing is performed to insure areas are safe for swimming. Enterolert ... -
Standard Test Method for Specific Gravity and Absorption of Rock for Erosion Control
Abstract: 5.1 Rock for erosion control is composed of pieces of natural rock that are placed on construction projects, shorelines, streambeds, bridge abutments, pilings, and other structures to minimize the effects of erosion. The ... -
Standard Guide for Microbial Contamination in Fuels and Fuel Systems
Abstract: 5.1 This guide provides information addressing the conditions that lead to fuel microbial contamination and biodegradation and the general characteristics of and strategies for controlling microbial contamination. It ... -
Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy
Abstract: 5.1 Some oils are formulated with organo-metallic additives, which act, for example, as detergents, antioxidants, and antiwear agents. Some of these additives contain one or more of these elements: calcium, phosphorus, ... -
Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys
Abstract: 4.1 The PCI is a numerical indicator that rates the surface condition of the pavement. The PCI provides a measure of the present condition of the pavement based on the distress observed on the surface of the pavement, which ... -
Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
Abstract: 5.1 Lubricating oils can be formulated with additives, which can act as detergents, anti-oxidants, anti-wear agents, and so forth. Some additives can contain one or more of calcium, copper, magnesium, phosphorus, sulfur, ... -
Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
Abstract: 5.1 This test method evaluates RECPs and their means of installation to: 5.1.1 Reduce soil loss and sediment concentrations in stormwater runoff under conditions of varying channel conditions and soil type; 5.1.2 Function ... -
Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
Abstract: This specification covers four grades of fuel oil made in whole or in part with hydrocarbon-based used or reprocessed lubricating oil or functional fluids, such as preservative and hydraulic fluids. Grades RFO4, RFO5L, ...