درباره ما
JSA JIS G 0511
Stress corrosion cracking testing of metals and alloys using reverse U-bend test method
Organization:
JSA - Japanese Standards Association
Year: 2014
Abstract: This Standard specifies the methods of evaluating susceptibility mainly of Fe-based alloy and Ni-based alloy of austenitic materials to stress corrosion cracking in the environment of high temperature and high pressure water using reverse U-bend ( hereafter abbreviated as "RUB") specimens.
NOTE: The International Standard corresponding to this Standard and the symbol of degree of correspondence are as follows.
ISO 7539-10 : 2013 Corrosion of metals and alloys - Stress corrosion testing-Part 10: Reverse U-bend method (MOD)
In addition, symbols which denote the degree of correspondence in the contents between the relevant International Standards and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) according to ISO/lEC Guide 21 -1.
WARNING Persons carrying out tests based on this Standard should be familiar with normal laboratory practice. This Standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this Standard to establish appropriate safety and health practices.
NOTE: The International Standard corresponding to this Standard and the symbol of degree of correspondence are as follows.
ISO 7539-10 : 2013 Corrosion of metals and alloys - Stress corrosion testing-Part 10: Reverse U-bend method (MOD)
In addition, symbols which denote the degree of correspondence in the contents between the relevant International Standards and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) according to ISO/lEC Guide 21 -1.
WARNING Persons carrying out tests based on this Standard should be familiar with normal laboratory practice. This Standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this Standard to establish appropriate safety and health practices.
Collections
:
Show full item record
| contributor author | JSA - Japanese Standards Association | |
| date accessioned | 2017-09-04T17:45:28Z | |
| date available | 2017-09-04T17:45:28Z | |
| date copyright | 2014.10.20 | |
| date issued | 2014 | |
| identifier other | EIZBKFAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/168556 | |
| description abstract | This Standard specifies the methods of evaluating susceptibility mainly of Fe-based alloy and Ni-based alloy of austenitic materials to stress corrosion cracking in the environment of high temperature and high pressure water using reverse U-bend ( hereafter abbreviated as "RUB") specimens. NOTE: The International Standard corresponding to this Standard and the symbol of degree of correspondence are as follows. ISO 7539-10 : 2013 Corrosion of metals and alloys - Stress corrosion testing-Part 10: Reverse U-bend method (MOD) In addition, symbols which denote the degree of correspondence in the contents between the relevant International Standards and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) according to ISO/lEC Guide 21 -1. WARNING Persons carrying out tests based on this Standard should be familiar with normal laboratory practice. This Standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this Standard to establish appropriate safety and health practices. | |
| language | English | |
| title | JSA JIS G 0511 | num |
| title | Stress corrosion cracking testing of metals and alloys using reverse U-bend test method | en |
| type | standard | |
| page | 29 | |
| status | Active | |
| tree | JSA - Japanese Standards Association:;2014 | |
| contenttype | fulltext |